DLS T1 tweeter Owner's manual

DLS
Brand
DLS
Model
T1 tweeter
Category
Loudspeakers
Type
Owner's manual

DLS T1 tweeter is a high-quality audio device designed to enhance the treble reproduction in your car audio system. With its 1" silk dome tweeter, it delivers clear and detailed highs, ensuring an immersive and enjoyable listening experience. The tweeter features a compact design, making it suitable for various mounting options, including flush and surface mounting. It comes with a 12 dB high-pass cable filter that allows you to adjust the tweeter level to your preference.

DLS T1 tweeter is a high-quality audio device designed to enhance the treble reproduction in your car audio system. With its 1" silk dome tweeter, it delivers clear and detailed highs, ensuring an immersive and enjoyable listening experience. The tweeter features a compact design, making it suitable for various mounting options, including flush and surface mounting. It comes with a 12 dB high-pass cable filter that allows you to adjust the tweeter level to your preference.

Page is loading ...
Car stereo / amplifier
DLS T1, PRO/REF. SERIES TWEETER
Black -
Blue +
Red
Black -
Red +
Tweeter
Bass/mid
Tweeter filter
9-25604
Black -
Red +
Low-pass filter
Tweeter filter
Yellow
Speaker connection and tweeter level
select:
The filters coming with this tweeter should be connected in
series with respective speaker element as on the drawing.
Select tweeter level by connecting the red cable to either the
red or yellow cable coming out from the filter box. If the tweeter
is directed towards the listener, low level is to be prefered.
Otherwise make your own tests for best result.
Sometimes the midrange can be improved by phase reversing
the tweeter. Try it and make your own judgement.
NOTE! The filters must be used. If the tweeters are
connected without filters they may be damaged and
the sound reproduction will be bad.
THE KIT CONTAINS:
q 2 pcs 1" swivelball head tweeter elements
q 2 pcs 12 dB high-pass cable filter with level select
q Mounting accessories for dash-
and recessed mounting
FILTER CONNECTION
Here T1 is connected to a system with a bass/mid
speaker with it´s own low-pass filter (Like the PS4,
PS5, PS6, R4, R5, R6 and R8 systems).
Speaker
impedance 4Ω
Tweeter level select:
Red to red = high
Red to yellow = low
CONNECTION TO R36/R38
To R36 and R38 the tweeter
is connected with the cable fil-
ter to the tweeter terminals of
the black filter box.
Thank you for buying DLS T1 tweeters. T1 tweeters are included in the
DLS PRO slimline speaker kits PS4, PS5, PS6 and in the
REFERENCE 2-way systems P4, P5, P6, R4, R5, R6, R8 and R36.
They can also be bought separately for use as "Tune-up speakers" to
improve the treble in any other system.
DLS Svenska AB
P.O. Box 13029
S-402 51 Göteborg, Sweden
Tel. +46 31 840060
Fax +46 31 844021
If you have any questions about this product, contact
your local dealer or DLS customer support center.
DLS T1
Size 1" (2,5 cm)
Nom. power (RMS) 50 Watts
Freq. range 1,5 kHz-20 kHz
Sensitivity 93 dB
X-over frequency 3,5 kHz with attached filter
Magnet diameter 30 mm
Mounting depth 23 mm
Mounting hole 55 mm
Cone material Silk
FACTS ABOUT DLS PRA1 TWEETER
FLUSH MOUNTING:
You need a hole with a diameter of 55 mm. Put the two metal wings
through the two tracks in the center of the cup, just as the picture
shows, and attach them with the M4 screw and nut through the center
hole. The cup is attached to the door side when the metal wings is
pressed to the back side of the door.
Put the tweeter element into the cup with the cable going out through
the bottom hole. Then attach the element by putting the ring into the
space between the cup and the element.
SURFACE MOUNTING:
MOUNTING:
PRA1 can be mounted on the dashboard with the angled cup or
recessed in a doorside with the flush cup.
For straight surface mounting only use the
plain mounting plate to the right above.
Fasten with two screws.
For angled surface mounting use the plain
mounting plate together with the angled
cup. The plate is attached to the cup with
two small screws. The tweeter element is
attached to the cup by fitting the three
wings into the tracks of the cup and then
twist it clockwise.
  • Page 1 1
  • Page 2 2

DLS T1 tweeter Owner's manual

DLS
Brand
DLS
Model
T1 tweeter
Category
Loudspeakers
Type
Owner's manual

DLS T1 tweeter is a high-quality audio device designed to enhance the treble reproduction in your car audio system. With its 1" silk dome tweeter, it delivers clear and detailed highs, ensuring an immersive and enjoyable listening experience. The tweeter features a compact design, making it suitable for various mounting options, including flush and surface mounting. It comes with a 12 dB high-pass cable filter that allows you to adjust the tweeter level to your preference.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents