Case lucent User manual

Assembly Instructions

Required

Step 1. Take the bracket and mark the holes for

screws at the desired height, ensure that the

bracket is straight using a spirit level.

Step 2. Use the correct wall xing depending on

your wall material/type to connect the bracket to

the wall.

WALL FIXING NOT SUPPLIED

Step 3. Carefully take the mirror and lift on top of

the wall bracket so that the rear panel of the

mirror rests neatly up against the rubber pad of

the bracket and make sure that it is roughly

central on the bracket.

Supplied

2 x

Lucent

Mirror

Lucent Mirror – designed by Matthew Hilton

To prolong the life of the product and retain its appearance and functionality,

we would like to give you some relevant information and care advice:

This unit is manufactured from toughened glass.

The mirror has been made produced with UV bonded joints.

Care should be taken to make sure that no unnecessary stress is placed on the mirror.

It is recommended that no abrasive cleaners or solvents are used to clean the unit.

Please only use proprietary glass cleaners or alternatively, warm water with

a diluted mild detergent.

We thank you for purchasing this product and wish you many years of enjoyable and

functional use.

For more related products please visit: casefurniture.com

Care Instructions

Case Furniture Ltd

London, SW18 2HZ

United Kingdom

casefurniture.com