Tuya CR02 User manual

WiFI Connection:

1.Download the “ Smart life” Or “ Tuya” Free App from the Play

Store (Android) or App Store (IOS).

2.Once downloaded, the app will ask you to register your device,

enter your phone number or email which one makes you feel comf-

ortable and select the country you live in. If phone number selected

you will receive a text with a registration code. If you choose email

you will then create a password.

3.Login in the App with the account you registered.

4.Connection: Open your phone Wifi and Bluetooth, Power on the

smart table lamp then switch it OFF/ON 3 times by following these

steps: OFF-ON-OFF-ON-OFF-ON, until light begins to flash quickly

it goes to connection setting, Switch time interval should not exceed

5 seconds There are two ways to connect: First, A connection prompt

box will appear in the APP, click go to connect, it will enter into

“Add Device” Page

5.Follow the in-app instructions to connect the lamp to your Wifi

network.

6.Once connected, the App will prompt the connection, and click

“Done”

7.Now you can control the smart table lamp through App.

8.Once the configuration is completed successfully, the indicator

light will turn to solid white and the device will be added to the

“Device list”

9.When the lamp is connected, it can be controlled in the App.

Smart Table Lamp

User Manual

1. Connect the smart table lamp with your Phone Wifi and Bluetooth

are turn on status before using!

2. Make sure the voltage is within AC 100-264V.

3. Avoid using the lamp in high temperature or moisture

situation.

4. Make sure the device and your phone is under the same

Wifi network, the network must be 2.4GHz.

1 2 3

456

Device Connection as below : Warning: