2. sternglas
  3. Kanton 2.0 Silver-Brown Watch
Kanton 2.0 Silver-Brown Watch

sternglas Kanton 2.0 Silver-Brown Watch User manual

  • Hello! I'm your chat assistant. I've reviewed the user manual for the STERNGLAS timepiece, model Kanton 2.0. This document provides step-by-step instructions on how to wind the watch, set the correct time, and adjust the date. I'm ready to answer your questions about setting up your device.
  • How do I wind up the timepiece?
    How do I set the time?
    How do I set the date?
    What should I avoid when setting the date?
    Why does the date change at noon?
How to setup your timepiece
Before you can start, you need to wind up
your timepiece. To do so, wind the crown
(in position 1) clockwise about 15 times.
If you notice a slight whirring sound, the
movement starts working.
Now you are ready to set the time. To do so,
pull the crown to position 3 and turn until
the hands are in the correct position.
To set the date, push the crown in by one
position so that it is in position 2. Turn the
crown counterclockwise until the correct
date is displayed. Now you can push the
crown back to the starting position
(position 1). Be careful not to set the
date between 9 and 3 o’clock, otherwise
the mechanism may break.
Note: Your date changes at noon? This is
because the movement does not „know” if it
is noon or midnight. If so, simply wind your
timepiece forward by 12 hours.
01
02
03
Manual Kanton 2.0
/