sternglas Asthet 40mm Automatic White-Black Leather Watch User manual

Type
User manual
Before you can start, you need to wind up
your timepiece. To do so, wind the crown
(in position 1) clockwise about 15 times.
If you notice a slight whirring sound, the
movement starts working.
Now you are ready to set the time. To do so,
pull the crown to position 3 and turn until
the hands are in the correct position.
To set the date, push the crown in by one
position so that it is in position 2. Turn the
crown counterclockwise until the correct
date is displayed. Now you can push the
crown back to the starting position
(position 1).
Note: Your date changes at noon? This is
because the movement does not „know” if it
is noon or midnight. If so, simply wind your
timepiece forward by 12 hours.
How to setup your timepiece
01
02
03
Manual Asthet
  • Page 1 1

sternglas Asthet 40mm Automatic White-Black Leather Watch User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI