sternglas Edition Roncalli Watch User manual

Type
User manual
Remove the lock on the crown.
Your timepiece has a moon phase display.
To set the current moon phase, pull the
crown out to position 3 and wind it until the
correct moon phase indicator appears.
You can now set the time. Keep the crown at
position 3 and wind it to the correct time.
To set the date, push the crown in by one
position so that it is in position 2. Turn the
crown clockwise until the correct date is
displayed. Now you can push the crown
back to the starting position (position 1).
Note: Your date changes at noon? This is
because the movement does not „know” if it
is noon or midnight. If so, simply wind your
timepiece forward by 12 hours.
01
02
03
04
How to setup your timepiece
1 2 3
Manual Edition Roncalli
  • Page 1 1

sternglas Edition Roncalli Watch User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI