sternglas Taiga GMT Operating instructions

Taiga GMT
Brand
sternglas
Model
Taiga GMT
Type
Operating instructions
Manual Taiga GMT
Remove the lock from the crown.
To set the correct time, pull the crown to position 3 and turn
it until the correct time is displayed.
To set the date, push the crown in by one position so that it
is in position 2. Turn the crown clockwise until the correct
date is displayed. Now you can push the crown back to the
starting position (position 1).
Note: Your date changes at noon? This is because the
movement does not „know” if it is noon or midnight. If so,
simply wind your timepiece forward by 12 hours.
To set the second time zone (GMT), leave the crown in
position 2, but turn it counterclockwise to the correct hand
position.
Note: Are you wondering how to read the second time zone?
This is indicated by the yellow GMT hand, just like on a
single-hand watch. On the outer ring of the dial you will find
24-hour markers. This way you can easily read off the time.
How to setup your timepiece
01
02
03
04
  • Page 1 1

sternglas Taiga GMT Operating instructions

Taiga GMT
Brand
sternglas
Model
Taiga GMT
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents