2. Crystorama
  3. 2244-BF
2244-BF

Crystorama 2244-BF User manual

  • Hello! I'm your chat assistant. I have reviewed the Assembly Instruction for the CRYSTORAMA Lighting Fixture 2244-BF. This document provides detailed steps to help you assemble your lighting fixture. It includes specifications about bulb types and maximum wattage. Ask me any question about the assembly or other details, and I will do my best to assist you.
  • What type of bulbs are required for this fixture?
    What is the maximum wattage recommended for the bulbs?
    Is this fixture suitable for wet locations?
    What should I do before installing the fixture?
ASSEMBLYINSTRUCTIONMODEL#2244-BF
CRYST
RAMA
WARNING:
ElectricalDanger TurnPoweroff
WARNING: ThisproductcanexposeyoutoLead
whichisknowntothestateofCaliforniatocausecancer
and/orbirthdefectsorreproductiveharm.Formore
informationgotowww.P65Warnings.ca.gov
L I G H T I N GT H EW A YF O RS I X T YY E A R S
installedbyalicensedelectrician
inaccordancewiththeNational
Allelectricalcomponentsmustbe
ElectricCodeandtheappropriate
localelectricalcodes.
Howtoinstall
9.Installthebulbs(notincluded)intothesocket.
Youwillneed -CandelabraBaseBulb4
40WattsRecommended60WattsMax.
USELEDBULBSFOREXTENDEDUSE
This fixture is Dry rated
3.Slipthecenterrodalongwireandthreadintothe
couplinglocatedonthetopofthelightcluster.
Makesurethattheirontubesareassembledstraight
relativetothetopandbottomringbeforetightening
thetopscrewsandthebottomfinials.
(Thelongscrewsfromirontubes)
5.Spreadthearmssothatthearmsareatequal
distancefromeachother.
8.Installthefabricshadeontothecandlesleeve.
CHAIN
LOOP
ARMS
SHORTSCREWS
(Theshortscrewsfromtopsquarering)
LONGSCREWS
TOP SQUARERING
IRONTUBES
FABRIC SHADE
CANDLESLEEVE
BOTTOM
SQUARERING
BOTTOMFINIALS
LIGHTCLUSTER
COUPLING
6’’
3/4’’
21-1/2’’
29-3/4’’
6-1/2’’
4-1/2’’
4’’
FABRIC
SHADE
103-3/4’’
CENTER
ROD
4.Slipthearmassemblyalongwireandthreadinto
thecenterrod.
7.Sliptheloopalongwireandthreadontothenipple
ofarmassembly.
NIPPLE
1.Placethethreadedendofairontubeintoaholeon
thebottomsquarering.Securewithafinial.Repeat
thisfortheotherirontubes.
2.Removethelongscrewfromeachoftheirontubes.
Aligntheholesonthetopsquareringwiththeholes
thatthelongscrewswereremovedfrom.Tighten
eachscrewintotheholestosecurethetopsquare
ringandthe(4)irontubestogether.
6.Removetheshortscrewfromeachoftheholeson
thetopsquarering.Aligntheholesonthetabsof
thearmassemblywiththeholesonthetopsquare
ringandsecuretogetherusingtheshortscrews
thatwereremoved.
CRYST
RAMA
L I G H T I N GT H EW A YF O RS I X T YY E A R S
PartNumber
PartNumbers
A.(1)-Mountinghardware
B.(1)-CanopyW6’’xW6’’xH3/4’’ #XRF2240BFCAN6IN
J.(1)-TopsquareringW18-1/4’’xW18-1/4’’xH1/2’’ #XRF2244BFTOPRING
I.(4)-Longscrew
C.(1)-Collarring
H.(8)-Shortscrew
ASSEMBLYINSTRUCTIONMODEL#2244-BF
N.(4)-FabricshadeW4-1/2’’xH6-1/2’’ #XRF2241BFSHA6.5IN
O(A).(4)-Candlesleeve-BFW7/8’’xL3-3/8’’ #XRF2241BFCDL3.3IN
A
B
CD
E
F
H
I
J
G
K
L
M
N
O
D.(1)-Collarloop
E.(1)-Chain-72’’,4mmthick#XRF2240BFCHA4.0MM
F.(1)-Loop#XRF2240BFLOOP
G.(1)-CenterrodD1/2’’x9-1/2’’
K.(4)-IrontubeL17-1/2’’xH1/2’’ #XRF2244BFIRT
L.(1)-BottomsquareringW21-1/4’’xW21-1/4’’xH1/2’’ #XRF2244BFBOTRING
M.(4)-Bottomfinial#XRF2243BFFIN
O(B).(4)-Candlesleeve-WHW7/8’’xL3-3/8’’ #XRF2241WHCDL3.3IN
/