Gamber-Johnson External Printer Mount Armrest Installation guide

Brand: Gamber-Johnson

Model: External Printer Mount Armrest

Type: Installation guide

This manual is also suitable for

External Brother Printer Mount Armrest

Gamber-Johnson External Printer Mount Armrest

The Gamber-Johnson External Printer Mount Armrest is a versatile and convenient solution for mounting a Pentax Pocketjet printer in your vehicle. It can be installed on a top plate between the driver and passenger seats or on the back side of compatible console boxes.

The mount is adjustable, allowing you to position the printer at the optimal height for your needs. It also features a retainer bracket to hold the printer securely in place and a latching armrest/cover to protect the paper roll.

Installing the printer is easy: simply remove the retainer bracket, slide the printer into the mount, and reattach the bracket. Connect the power and data cables to the printer and secure them with cable ties.

Gamber-Johnson External Printer Mount Armrest

The Gamber-Johnson External Printer Mount Armrest is a versatile and convenient solution for mounting a Pentax Pocketjet printer in your vehicle. It can be installed on a top plate between the driver and passenger seats or on the back side of compatible console boxes.

The mount is adjustable, allowing you to position the printer at the optimal height for your needs. It also features a retainer bracket to hold the printer securely in place and a latching armrest/cover to protect the paper roll.

Installing the printer is easy: simply remove the retainer bracket, slide the printer into the mount, and reattach the bracket. Connect the power and data cables to the printer and secure them with cable ties.

Rev.C

INST-317

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

7160-0006, 7110-0995, 7160-0430

Form

ARMREST PRINTER MOUNT-PENTAX POCKETJET

PJ-673 WIRELESS PRINTER

Product Revision

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Printing Spec:

INSTALLATION INSTRUCTIONS

PS-001

The 7160-0006 and 7110-0995 Armrest Printer Mounts for Pentax Pocketjet printers are typically

mounted on a top plate installed between the driver and passenger seats while the 7160-0430 is

mounted to the back side of compatible console boxes.

The hardware bags supplied with the mounts includes bolts, washers and nuts to

attach the printer mounts as shown below.

The height of the Armrest can be adjusted by tilting the upper portion of the mount back and

loosening the bolt wich runs down the center of the pole. Position the Armrest at the required

height and re-tighten the bolt.

The Pentax Pocketjet Printer is installed by removing the Retainer Bracket and sliding the printer

into the mount. Re-attach the Retainer Bracket to hole the printer in place. Connect power

and data cables to the printer and secure them with cable ties.

Paper Rolls are installed into the Printer mount by releasing the latch and opening the

Armrest/Cover. Place the paper roll on the nylon rod and feed into the printer per the

instructions supplied with the printer. Close and latch the Armrest/Cover to protect the paper.

1/4 Flat Washer

Retainer Bracket

Carriage Bolt

3/8 Flat Washer

Armrest/Cover

1/4-20 Nylock Nut

Top Plate

1/4-20 x 1

Latch

1/4 Lock Washer

1/4 Flat Washer

Hex Head Bolt

1/4-20 x .625

Console Box

© Copyright 2013 Gamber-Johnson, LLC

1

Gamber-Johnson External Printer Mount Armrest Installation guide

Brand: Gamber-Johnson

Model: External Printer Mount Armrest

Type: Installation guide

This manual is also suitable for

External Brother Printer Mount Armrest

Gamber-Johnson External Printer Mount Armrest

The Gamber-Johnson External Printer Mount Armrest is a versatile and convenient solution for mounting a Pentax Pocketjet printer in your vehicle. It can be installed on a top plate between the driver and passenger seats or on the back side of compatible console boxes.

The mount is adjustable, allowing you to position the printer at the optimal height for your needs. It also features a retainer bracket to hold the printer securely in place and a latching armrest/cover to protect the paper roll.

Installing the printer is easy: simply remove the retainer bracket, slide the printer into the mount, and reattach the bracket. Connect the power and data cables to the printer and secure them with cable ties.

Download PDF

Related papers

Other documents