Vita Hamilton Trellis Operating instructions

Vita
Brand
Vita
Model
Hamilton Trellis
Type
Operating instructions

Vita Hamilton Trellis is a garden trellis that can be used to support climbing plants and create a beautiful and functional outdoor space. The trellis is made of durable materials and is easy to assemble. It features a sturdy frame with a top arch and vertical spindles, providing ample support for plants to grow and climb. The horizontal slats allow for easy attachment of plants and create a decorative touch. With its classic design, the Vita Hamilton Trellis is a perfect addition to any garden, patio, or balcony.

Vita Hamilton Trellis is a garden trellis that can be used to support climbing plants and create a beautiful and functional outdoor space. The trellis is made of durable materials and is easy to assemble. It features a sturdy frame with a top arch and vertical spindles, providing ample support for plants to grow and climb. The horizontal slats allow for easy attachment of plants and create a decorative touch. With its classic design, the Vita Hamilton Trellis is a perfect addition to any garden, patio, or balcony.

Tools You Will Need
• Cordless Drill
• Tape Measure
• Level
• Shovel
Gener
al Information
• Read Instruc
tions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 5’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling component.
Hamilton Trellis
ASSEMBLY INSTRUCTIONS
1
11
Not t
o Scale
Please read through before starting assembly.
IMPORTANT: CHECK TH
E INSIDE OF YOUR POSTS FOR ALL MATERIALS.
Check Box for These Contents
In the event of missing or defective parts please call our customer service department at
1 800 282 9346
(Mon. to Fri. 8:00 AM to 5:00 PM EST).
V1.3 / 060421
Ground
4
1
6
2
7
8
5
10
9
21 1/2 in
54
.6 cm
24 1/2 in
62.2
cm
2 i
n
5.1 cm
10 i
n
25.4 cm
60 1/2
in
153.4 cm
1 1/2 i
n
3.8 cm
3
www.wearevita.com
1.
Top Arch
(1) - 11113
2. Post Caps
(
2) - 10600
3. Arch Spokes - Short (2) 1/4” x 1 1/2“ x 10” - (0.6 cm x 3.8 cm x 25.4 cm)- 11114
4.
Arch Spokes - L
ong
(2)
1/4” x 1 1/2“ x 13 3/4” -
(0.6 cm x 3.8 cm x 35 cm) -
11115
5. Top Rail (1) 7/8” x 1 1/2“ x 24 3/8” - (2.2 cm x 3.8 cm x 61.9 cm) -11116
6.
Vertical Spindles
(4) 1/4” x 1 1/2“ x 44 1/2” - (0.6 cm x 3.8 cm x 113 cm) -
11117
7. Left Post
(1)
1 1/2” x 1 1/2“ x 58” -
(3.8 cm x 3.8 x cm x 147.3 cm ) -
11118
8.
Horizontal Slats
(6) 1/4” x 1 1/2“ x 24 3/8” - (0.6 cm x 3.8 cm x 61.9 cm ) -
11119
9.
Right Post
(1)
1 1/2” x 1 1/2“ x 58” -
(3.8 cm x 3.8 x cm x 147.3 cm ) -
11120
10.
Bottom Rail
(1) 7/8” x 1 1/2“ x 24 3/8” - (2.2 cm x 3.8 cm x 61.9 cm) -
11121
11.
3/4”
(2 cm)
Self-Auguring Stainless Steel Screw
(8) - 20004
2
Insert the top arch into the post caps as shown.
Insert until the arches ‘bottom out’ on the post caps.
With 4 of the provided screws, fasten the post caps on
both sides to the arches as shown.
1
2
STEP ONE
Assemble the Top Arch
Hamilton Tr e llis Ins tructions
1
2
Layout the top rail, bottom rail, and vertical spindles as shown.
Note the difference between the top and bottom rail.
1
STEP T WO
Assemble the Trellis
1
Top Rail
(Holes on both top and bottom of rail)
Bottom Rail
(Holes only on top of rail)
Insert the four arch spokes as shown. Note the two different
lengths of arch spokes.
3
3
Short Arches
Long Arches
3
Lay down one of the post on the ground with the holes facing
up as shown. Carefully align and insert the top and bottom
rails into the respective holes. Push until the tabs lock into
place.
Note: Once inserted and pushed into the routed holes,
the top and bottom rails will lock into place.
Continue by inserting the horizontal slats as shown. Note
the pattern and location of the routered holes on the post.
Starting with the bottom rail, insert each of the horizontal
components into the other post. Work your way to the top rail,
one horizontal rail at a time.
Align and insert the asembled top arch onto the
trellis as shown. Exess force should not be used during
this step.
2
3
STEP T WO
Assemble the Trellis
Hamilton Tr e llis I n s t ruction s
4
2
5
5
3
Start Here
4
4
Toll Free Phone: 1 800 282 9346
Toll Free Fax: 1 877 464 9286
www.wearevita.com
STEP T H REE
Complete the trellis assembly by fastening the last four
screws through the post caps onto the posts.
6
A
B
C
Install Trellis into Ground
Move the trellis to its final location. When you are satisfied
with the location, mark the positions of the posts, then move
the trellis aside and carefully lay it on its side. Excavate the
two posts holes approximately 10" (25.4 cm) deep x 3 (7.6 cm)
diameter. Carefully move the trellis back into position.
Level it both vertically and horizontally into the excavated
holes.
Backfill the holes with the excavated soil.
Optional: for a sturdier installation, pour concrete into the
excavated holes to hold the posts in place.
6
A
2
Level
B
C
10” (25.4 cm)
3“ (7.6 cm)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Vita Hamilton Trellis Operating instructions

Vita
Brand
Vita
Model
Hamilton Trellis
Type
Operating instructions

Vita Hamilton Trellis is a garden trellis that can be used to support climbing plants and create a beautiful and functional outdoor space. The trellis is made of durable materials and is easy to assemble. It features a sturdy frame with a top arch and vertical spindles, providing ample support for plants to grow and climb. The horizontal slats allow for easy attachment of plants and create a decorative touch. With its classic design, the Vita Hamilton Trellis is a perfect addition to any garden, patio, or balcony.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents