CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Date: 03-21-2014
Page 1 of 1
KELFORD COUNTER STOOL
480-3232
QTYPART
4A
1E
HARDWARE QTYPART HARDWARE
4
B
8C 8D
HARDWARE LIST
A
B
C
D
E
(4)
(4)
(8)
(8)
(1)
1/4” x 1-1/2” Allen Bolts
1/4” x 5/8” Allen Bolts
1/4” Flat Washers
1/4” Spring Washers
1/4” Allen Wrench
PIECES LIST
F
G
H
(1)
(2)
(2)
Seat Base
Stool Leg Panels
Half Support Rings
STEP 1
Begin assembly by crossing the Leg Panels
(G). Then connect the Half Support Rings (H)
together and secure them to the leg panels
with 1 Allen Bolt (B), 1 Spring Washer (D) and
1 Flat Washer (C) per leg. Tighten all bolts
with Allen Wrench (E) provided.
STEP 2
Next attach Leg Panels (G) to Seat Base (F)
using 4 Allen Bolts (A), 4 Spring Washers (D)
and 4 Flat Washers (C). Tighten all bolts with
Allen Wrench (E) provided. The assembly is
now complete.
G G
C
D
B
C
D
B
A
C
D
H
F
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly
is required. This Designer’s Image
TM
product is designed for residential use only. Customer Service Phone Number: 502-562-0000
/
