Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 11-18-2014
Page 1 of 1
KIRKHAM SWIVEL STOOL
Model #5670-826 Counter Stool
Model #5670-830 Barstool
HARDWARE LIST
A (8) 1/4” x 15mm Sunk Bolts
B (6) 1/4” x 15mm Allen Bolts
C (2) 1/4” x 22m Allen Bolts
D (8)
Φ
6.5 Spring Washers
E (8)
Φ
6.5
x δ1.5
Flat Washers
F (1) Allen Wrench
PARTS LIST
G (1) Stool Back
H (4) Legs
I (1) Support Ring
J (1) Seat
QTYPART
2C
8E
HARDWARE QTYPART HARDWARE
8
1
D
F
8A 6B
CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
AA
A
A
B
B
B
B
C
C
D
D
D
D
D
D
E
E
E
E
E
E
J
G
H
H
H
H
I
STEP 1
Begin assembly by attaching Seat (J) to Stool
Back (G) using 2 Allen Bolts (B), 2 Spring Washers
(D) and 2 Flat Washers (E) from the inside and 2
Allen Bolts (C), 2 Spring Washers (D), and 2 Flat
Washers (E) from the outside. Tighten all bolts
using Allen Wrench (F) provided.
STEP 2
Next attach 3 Legs (H) to Seat (J) using 2 Sunk
Bolts (A) per leg. Do not tighten bolts at this time.
STEP 3
Next insert Support Ring (I) in between Legs (H)
and secure using 1 Allen Bolt (B), 1 Spring Washer
(D) and 1 Flat Washer (E) per leg. Do not tighten
bolts at this time.
STEP 4
Finally attach remaining Leg (H) to Seat using 2
Sunk Bolts (A) and to Support Ring (I) using 1
Allen Bolt (B), 1 Spring Washer (D) and 1 Flat
Washer (E). Tighten all bolts using Allen Wrench
(F) provided. The assembly is now complete.
/
