red lion RLY601 & 6A1 ‐ User manual

Brand: red lion

Model: RLY601 & 6A1 ‐

Type: User manual



Inside US: +1 (877) 432-9908 Bulletin No. RLY6/6A-A

Outside US: +1 (717) 767-6511 Drawing No. LP1020

www.redlion.net Effective 2017-06-02

-1-

ModelRLY6&6A‐SinglePhaseDINRailMountSolidStat eRelay

DESCRIPTION

The RLY60100 is a solid state relay that switches load currents up to

30 A; the RLY6A100 switches load currents up to 45 A. These units

feature zero voltage turn-on to minimize radiated RFI when switching. A

low level DC control signal of 4 to 32 VDC is all that is needed for the

switching operation. These units provide a greatly increased operational

life over mechanical relays by avoiding the usual relay contact problems

such as: arcing, bouncing, and mechanical failure.

SAFETYSUMMARY

All safety related regulations, local codes and instructions that appear

in the literature or on equipment must be observed to ensure personal

safety and to prevent damage to either the instrument or equipment

connected to it. If equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment may be impaired.

Do not use this unit to directly command motors, valves, or other

actuators not equipped with safeguards. To do so, can be potentially

harmful to persons or equipment in the event of a fault to the unit.

ORDERINGINFORMATION

SPECIFICATIONS

1. CONTROL CIRCUIT VOLTAGE: 4 to 32 VDC

2. SWITCHING VOLTAGE: 1 VDC turn-off; 4 VDC turn-on

3. INPUT CURRENT:

RLY6: 8-12 mA

RLY6A: 14-17 mA

4. MAXIMUM CAPACITANCE: ≤ 8 pf for input/output

5. INSULATION RESISTANCE: 1000 MΩ at 500 VDC

6. LOCAL SIGNALING: Green LED indicates active input/ouput status.

7. SOLID STATE OUTPUT TYPE: Zero voltage switching SCR output

8. CONTACT TYPE: 1 NO

9. OUTPUT VOLTAGE: 48 to 660 VAC

Allowable Frequency On Output: 47 – 63 Hz

10.VOLTAGE DROP:

RLY6: 1.6 V on-state

RLY6A: 1.7 V on-state

11.TRANSIENT OVERVOLTAGE: 1200 V

12.LOAD CURRENT:

RLY6: 0.15-30 A

RLY6A: 0.15-45 A

13.SURGE CURRENT:

RLY6: ≤1200 A for 16.6 msec

RLY6A: ≤625 A for 16.6 msec

14.LEAKAGE CURRENT: ≤ 1 mA off-state

15.MAXIMUM I

T FOR FUSING:

RLY6: 6000 A

.s for 8.3 msec

RLY6A: 1620 A

.s for 8.3 msec

16.DV/Dt: 500 V/µsec pff-state at maximum voltage

17.RESPONSE TIME: 0.5 cycle turn-off; 0.5 cycle turn-on

18.OVERVOLTAGE CATEGORY: III

19.CONNECTIONS (terminals):

RLY6: 1 x 0.2 - 1 x 5.3 mm

(AWG 24-10) for output or input

RLY6A: 1 x 0.2 - 1 x 8.4 mm

(AWG 24-8) for output

1 x 0.2 - 1 x 3.3 mm

(AWG 24-12) for input

20.TIGHTENING TORQUE:

Output: 12.0-15.0 lb-in (1.4-1.7 N.m)

Input: 5.0-6.0 lb-in (0.6-0.7 N.m)

21.MOUNTING SUPPORT: Symmetrical DIN rail

22.PRODUCT WEIGHT:

RLY6: 9.88 oz (0.28 kg)

RLY6A: 16.79 oz (0.476 kg)

ENVIRONMENTAL SPECIFICATIONS

23.DIELECTRIC STRENGTH: 4 kVAC for input or output to case

4 kVAC for input/output

24.POLLUTION DEGREE: 2

25.STANDARDS: UL 508, IEC 60950-1, CSA C22.2 No 14

26.PRODUCT CERTIFICATIONS: CSA File: 269719, UL File: E191578

27.MARKING: CE, CSA, UL

28.IP DEGREE OF PROTECTION: IP20

29.AMBIENT AIR TEMPERATURE FOR OPERATION: -40 to 80 °C

30.AMBIENT AIR TEMPERATURE FOR STORAGE: -40 to 125 °C

MODEL NO. DESCRIPTION PART NUMBERS

RLY6

30 A Single Phase Solid State Relay, DIN

Rail Mount

RLY60100

RLY6A

45 A Single Phase Solid State Relay, DIN

Rail Mount

RLY6A100

CAUTION: Risk Of Danger.

Read complete instructions prior to

installation and operation of the unit.

CAUTION: Risk of electric shock.

Do not dispose of unit in trash - Recycle

• INTEGRATED HEAT SINK

• SOLID STATE SWITCHING

• SINGLE PHASE OUTPUT RATING: 30 A (RLY6) or 45 A (RLY6A)

• SWITCHING: 48 TO 660 VAC

• CONTROL SIGNAL: 4 TO 32 VDC

• ZERO VOLTAGE TURN-ON

• MOUNTS ON DIN RAIL OR DIRECTLY TO PANEL

• LED “ON” INDICATOR

• CAGE CLAMP TERMINATIONS



-2-

Bulletin No. RLY6/6A-A Effective 2017-06-02

Drawing No. LP1020

MOUNTING

DINRailMounting

MinimumSpacing

DERATING CURVE

WIRING

DIMENSIONSIninches(mm)

(22.4)

0.88

3.15 (80)

3.85 (97.7)

3.89 (98.8)

(11.2)

0.44

(22.5)

0.89

3.53 (89.7)

(Ø4.4)

Ø0.17

RLY60100

DIMENSIONSIninches(mm)

RLY6A100

3.10 (78.7)

3.89 (98.8)

4.20 (106.7)

(45.5)

1.79

3.47 (88.1)

3.00 (76.2)

(9.6)

0.38

(26.2)

1.03

(44.4)

1.75

(Ø4.5)

Ø0.18

Click!

Rail 35 mm

IEC/EN 60715

1.57

(40)

0.79

(20)

20 40 60 80

AMBIENT TEMPERATURE (°C)

RLY6A 45 Amp

RLY6 30 Amp

OUTPUT CURRENT (Arms)

INPUT

OUTPUT

RLY6

LOAD

red lion RLY601 & 6A1 ‐ User manual

red lion RLY601 & 6A1 ‐ User manual

red lion RLY601 & 6A1 ‐ User manual

Related papers

Other documents