Design House 519884 Installation guide

Design House
Brand
Design House
Model
519884
Type
Installation guide

Design House 519884 is a semi-flush mount light fixture that provides ambient lighting for any room. It features a classic design with a metal ceiling plate and a frosted glass shade that evenly distributes light. The fixture is easy to install and includes all necessary hardware for quick and simple mounting. It is compatible with incandescent or LED bulbs, allowing you to customize the brightness and warmth of the light to your preference.

Design House 519884 is a semi-flush mount light fixture that provides ambient lighting for any room. It features a classic design with a metal ceiling plate and a frosted glass shade that evenly distributes light. The fixture is easy to install and includes all necessary hardware for quick and simple mounting. It is compatible with incandescent or LED bulbs, allowing you to customize the brightness and warmth of the light to your preference.

KIMBALL 1LT SEMI FLUSH
ASSEMBLY/INSTALLATION INSTRUCTIONS
Item # 519876 (KIMBALL 1LT SEMI FLUSH CM GAL)
Item # 519884 (KIMBALL 1LT SEMI FLUSH CM BRZ)
WARNING: Risk of Fire. Min 75ºC supply conductors. Consult a qualied electrician to ensure correct
installation.
Turn off the main power at the circuit breaker before installing the xture, in order to prevent possible
shock.
#519876
Customer Service 1-800-558-8700
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
qualied electrician.
Remove the xture and the mounting package from the box and make sure that no parts are missing by
referencing the illustrations on the installation instructions.
Phillips screwdriver.
CAUTION
GENERAL
TOOLS REQUIRED
ASSEMBLY AND INSTALLATION
ASSEMBLY AND INSTALLATION
(CONT.)
Please read carefully and save these instructions, as you may need them at a later date.
Turn off the power at fuse or circuit breaker.
Turn on the power at fuse or circuit breaker.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN.
JUNCTION
BOX
MOUNTING SCREWS
WIRE NUTS
CROSS BAR
GROUND SCREW
BALL NUTS
LAMP HOLDER
SHADE
FIXTURE SCREWS
#519884
1. Gently take all parts out of the package, lay them on a smooth surface, unscrew the BALL NUTS
and the FIXTURE SCREWS. Attach the CROSS BAR to the JUNCTION BOX using (2) MOUNTING
SCREWS.
2. Make wire connections with WIRE NUTS:
A - Connect the black wire from Fixture to the black supply wire.
B - Connect the white wire from Fixture to the white supply wire.
C - Attach the xture ground wire to the CROSS BAR with the green GROUND SCREW. Then
connect it to the supply ground wire with a WIRE NUT. Carefully tuck wires back into the
JUNCTION BOX.
3. Attach the CEILING PLATE to the CROSS BAR through SCREW HOLES as shown, and secure it
with BALL NUTS.
4. Attach the SHADE to the LAMP HOLDER and secure them with SOCKET RING.
5. Install BULB (not included). See relamping label at socket area or packaging for maximum allowed
wattage.
SOCKET RING
BULB (not included)
SCREW HOLES
CEILING PLATE
  • Page 1 1

Design House 519884 Installation guide

Design House
Brand
Design House
Model
519884
Type
Installation guide

Design House 519884 is a semi-flush mount light fixture that provides ambient lighting for any room. It features a classic design with a metal ceiling plate and a frosted glass shade that evenly distributes light. The fixture is easy to install and includes all necessary hardware for quick and simple mounting. It is compatible with incandescent or LED bulbs, allowing you to customize the brightness and warmth of the light to your preference.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents