Trend TW40014GD User manual

TW40014GD

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are

missing by referencing the illustrations on the installation instructions.

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit

conductor. Min 90ºC supply conductors.

Turn off the main power at the circuit breaker before installing the fixture, in order to prevent

possible shock.

ASSEMBLY AND INSTALLATION

1. Secure the mounting bar(7) with box screws(8) to the outlet box.

2. Attach the backplate against the outlet box. Secure with the ball nut(4) and mounting screw(6).

3. Loosen the ball nut(4), and insert the bulb (3) into socket(5).

4. Put the shade(2) into the frame and tighten with the screw(1).

DO NOT USE BARE HANDS TO TOUCH THE BULB.

INSTALLATION IS NOW COMPLETE

1. SCREW

2. SHADE

3. BULB

4. BALL NUT

5. SOCKET

6. MOUNTING SCREW

7. MOUNTING BAR

8. BOX SCREW .

9. GROUND SCREW

10. MOUNTING BAR