2. Gronomics
  3. VGS 33-23

Gronomics VGS 33-23 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Gronomics VGS 33-23 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.gronomics.com East Bethel, MN USA 763-753-7374
Continued
If any pieces are missing or replacement parts are
required, contact Gronomics at 1-855-299-6727.
NOTE: The vertical garden stand can be equipped
with a self watering system, contact Gronomics at
1-855-299-6727.
Vertical Garden Stand
Assembly Instruction
Parts List
ITEM QTY. PART # DESCRIPTION
1 1 VGS 33-23 Vertical Garden Stand
2 4 CS8-112ZY Screw, #8 x 1-1/2”
1
Parts Identifi cation
VGS 33-23
1
Packaged & Inspected by: Date:
Torx® T15
2
www.gronomics.com East Bethel, MN USA 763-753-7374
Lower the vertical garden bed into the garden stand
(Item 1).
Fasten the vertical garden bed to the garden stand with
four 8 x 1-1/2” screws (Item 2).
Installing The Vertical Garden Bed
2
1
2
Vertical Garden Bed
Install Screws
Into The Pre-
drilled holes
Install Screws
Into The Pre-
drilled holes
2
2
NOTE: Before adding the soil mix, verify that the vertical
garden stand is secure and stable. Verify that all back rails
and shelf rails are completely installed.
Slowly place the soil mix into the top of the vertical garden.
Add soil mix until it is approximately one inch below the top
back and shelf rails.
3
Soil Mix
/