Eagle Group S4-63S-L Datasheet

Type
Datasheet
S4-63S-S-*
S4-63S-L*
S4-63Z-S-*
S4-63Z-L*
S4-74S-S-*
S4-74S-L*
S4-74Z-S-*
S4-74Z-L*
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG01.12A Rev. 03/09
Catalog Specification Sheet No.
EG01.12A
LIFESTOR
®
Polymer Shelving—Starter Units
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 Fax: 302-653-2065
www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
LIFESTOR
®
Polymer Shelving
—Starter Units
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Options / Accessories
Casters**
Ledges
Dividers
Drying racks
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: [email protected]
MODELS:
* See charts for complete model numbers.
Short Form Specifications
Eagle LIFESTOR
®
Polymer Shelving Stationary Starter Section,
model ______________. Unit to consist of four (solid,
louvered) polymer shelves with MICROGARD
®
antimicrobial
protection, four (63˝, 74˝) 1
1
4˝-diameter (stainless steel, zinc
plated) posts grooved at increments, and (stainless steel,
zinc plated) rails.
Allows for removal or adjustment of intermediate shelves
without disassembling the entire unit.
Polymer shelving sections are non-corrosive.
Easy to assemble in minutes—only one person required.
Shelf sections are dishwasher safe.
Available in widths of 18˝ and 23˝ (457 and 584mm).
Add-on kit (see spec sheet #EG01.12C) and add-on units
(see spec sheet #EG01.12B) allow for L”, “T”, or continuous
configurations without using traditional S-hooks.
Two component choices: economical zinc with clear epoxy
(virtually non-corrosive) or non-corrosive stainless steel.
LIFESTOR
®
four-shelf starter unit
shelving made of
removable sections
Certifications / Approvals
Features made of injection-molded high strength polymer:
Shelves—Available in solid or louvered. Shelf sections fit
over rails.
Side braces**—Each end fits securely into a lug on
the connector.
Connector kit
- Split sleeve—features interior ridge to lock into the
horizontal grooves of the post.
- 2-sided lug connector—designed for single corner posts.
- 3-sided lug connector—designed for an “L” or continuous
shape where two shelf corners join together.
- 4-sided lug connector—designed to be a universal
connector and also for a “T shape where three corners join
together. The 4-sided lug connector is supplied with all units
unless the 2-sided or 3-sided lug connectors are specified.
Features available in zinc with clear epoxy or stainless steel:
Posts—1
1
4˝ (32mm) outside diameter, grooved for positive
positioning of the connector kit. Includes top cap and
adjustable foot.
Rails—1
1
4˝ (32mm) outside diameter. Components on each
end are of injection-molded high strength polymer.
** Side braces are available in zinc with clear epoxy or stainless steel finish upon request.
MICROGARD
®
is standard on all LIFESTOR
®
Shelving.
MICROGARD
®
is an antimicrobial agent which contains
built-in protection to retard the growth of a broad range of
bacteria, mold and mildew on shelf surface that causes
stains, odors and degradation.
Mobile application option available
**Stainless steel or zinc side braces are necessary for use with casters. See
spec sheet EG01.12C for additional information on casters for LIFESTOR
®
.
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Catalog Specification Sheet No.
LIFESTOR
®
Polymer Shelving—Starter Units
Item No.:
Project No.:
S.I.S. No.:
Rev. 03/09
Printed in U.S.A.
©2009 by Eagle Group
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 Fax: 302-653-2065
www.eaglegrp.com
EG01.12A
LIFESTOR
®
Polymer Shelving—Starter Units
units with four units with four units with four units with four shelf shelf
solid shelves louvered shelves solid shelves louvered shelves width length weight
model # model # model # model # in. mm in. mm lbs. kg
S4-63S-S1824PM S4-63S-L1824PM S4-63Z-S1824PM S4-63Z-L1824PM 18˝ 457 24˝ 610 42 19.1
S4-63S-S1830PM S4-63S-L1830PM S4-63Z-S1830PM S4-63Z-L1830PM 18˝ 457 30˝ 762 52 23.6
S4-63S-S1836PM S4-63S-L1836PM S4-63Z-S1836PM S4-63Z-L1836PM 18˝ 457 36˝ 914 60 27.2
S4-63S-S1842PM S4-63S-L1842PM S4-63Z-S1842PM S4-63Z-L1842PM 18˝ 457 42˝ 1067 65 29.5
S4-63S-S1848PM S4-63S-L1848PM S4-63Z-S1848PM S4-63Z-L1848PM 18˝ 457 48˝ 1219 70 31.8
S4-63S-S1854PM S4-63S-L1854PM S4-63Z-S1854PM S4-63Z-L1854PM 18˝ 457 54˝ 1372 78 35.4
S4-63S-S1860PM S4-63S-L1860PM S4-63Z-S1860PM S4-63Z-L1860PM 18˝ 457 60˝ 1524 86 39.0
S4-63S-S2324PM S4-63S-L2324PM S4-63Z-S2324PM S4-63Z-L2324PM 23˝ 584 24˝ 610 48 21.8
S4-63S-S2330PM S4-63S-L2330PM S4-63Z-S2330PM S4-63Z-L2330PM 23˝ 584 30˝ 762 60 27.2
S4-63S-S2336PM S4-63S-L2336PM S4-63Z-S2336PM S4-63Z-L2336PM 23˝ 584 36˝ 914 70 31.8
S4-63S-S2342PM S4-63S-L2342PM S4-63Z-S2342PM S4-63Z-L2342PM 23˝ 584 42˝ 1067 76 34.5
S4-63S-S2348PM S4-63S-L2348PM S4-63Z-S2348PM S4-63Z-L2348PM 23˝ 584 48˝ 1219 82 37.2
S4-63S-S2354PM S4-63S-L2354PM S4-63Z-S2354PM S4-63Z-L2354PM 23˝ 584 54˝ 1372 94 42.6
S4-63S-S2360PM S4-63S-L2360PM S4-63Z-S2360PM S4-63Z-L2360PM 23˝ 584 60˝ 1524 102 46.3
Stainless Steel
finish EAGLEbrite
®
Zinc finish
Starter Units with 63˝ (1600mm)-high Posts
All shelving units listed below feature four posts and four shelves.
units with four units with four units with four units with four shelf shelf
solid shelves louvered shelves solid shelves louvered shelves width length weight
model # model # model # model # in. mm in. mm lbs. kg
S4-74S-S1824PM S4-74S-L1824PM S4-74Z-S1824PM S4-74Z-L1824PM 18˝ 457 24˝ 610 44 20.0
S4-74S-S1830PM S4-74S-L1830PM S4-74Z-S1830PM S4-74Z-L1830PM 18˝ 457 30˝ 762 54 24.5
S4-74S-S1836PM S4-74S-L1836PM S4-74Z-S1836PM S4-74Z-L1836PM 18˝ 457 36˝ 914 62 28.1
S4-74S-S1842PM S4-74S-L1842PM S4-74Z-S1842PM S4-74Z-L1842PM 18˝ 457 42˝ 1067 67 30.4
S4-74S-S1848PM S4-74S-L1848PM S4-74Z-S1848PM S4-74Z-L1848PM 18˝ 457 48˝ 1219 72 32.7
S4-74S-S1854PM S4-74S-L1854PM S4-74Z-S1854PM S4-74Z-L1854PM 18˝ 457 54˝ 1372 80 36.3
S4-74S-S1860PM S4-74S-L1860PM S4-74Z-S1860PM S4-74Z-L1860PM 18˝ 457 60˝ 1524 88 39.9
S4-74S-S2324PM S4-74S-L2324PM S4-74Z-S2324PM S4-74Z-L2324PM 23˝ 584 24˝ 610 50 22.7
S4-74S-S2330PM S4-74S-L2330PM S4-74Z-S2330PM S4-74Z-L2330PM 23˝ 584 30˝ 762 62 28.1
S4-74S-S2336PM S4-74S-L2336PM S4-74Z-S2336PM S4-74Z-L2336PM 23˝ 584 36˝ 914 72 32.7
S4-74S-S2342PM S4-74S-L2342PM S4-74Z-S2342PM S4-74Z-L2342PM 23˝ 584 42˝ 1067 76 34.5
S4-74S-S2348PM S4-74S-L2348PM S4-74Z-S2348PM S4-74Z-L2348PM 23˝ 584 48˝ 1219 84 38.1
S4-74S-S2354PM S4-74S-L2354PM S4-74Z-S2354PM S4-74Z-L2354PM 23˝ 584 54˝ 1372 96 43.6
S4-74S-S2360PM S4-74S-L2360PM S4-74Z-S2360PM S4-74Z-L2360PM 23˝ 584 60˝ 1524 106 48.1
Stainless Steel
finish EAGLEbrite
®
Zinc finish
Starter Units with 74˝ (1880mm)-high Posts
  • Page 1 1
  • Page 2 2

Eagle Group S4-63S-L Datasheet

Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI