Eagle Group ST1836Z-13 Datasheet

Eagle Group
Brand
Eagle Group
Model
ST1836Z-13
Type
Datasheet

Eagle Group ST1836Z-13 is a stencil shelf that can be used to store and organize stencils. It has a 18˝ width x 36˝ length footprint and is made of EAGLEbrite® zinc plating. The shelf has 15 dividers to provide 2˝ inside dimension and 4˝ up and down support. The shelf is adjustable in 1˝ increments and can hold up to 15 stencils. It can be used with any other wire shelving product on the same centers. The shelf can be made conductive with the use of optional aluminum split sleeves.

Eagle Group ST1836Z-13 is a stencil shelf that can be used to store and organize stencils. It has a 18˝ width x 36˝ length footprint and is made of EAGLEbrite® zinc plating. The shelf has 15 dividers to provide 2˝ inside dimension and 4˝ up and down support. The shelf is adjustable in 1˝ increments and can hold up to 15 stencils. It can be used with any other wire shelving product on the same centers. The shelf can be made conductive with the use of optional aluminum split sleeves.

two tiers of stencil shelves—
shown in mobile unit
configuration
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG07.08 Rev. 12/08
Catalog Specification Sheet No.
EG07.08
Stencil Shelves
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Short Form Specifications
Stencil shelves are paired with opposing design top and
bottom. Footprint is 18˝ width x 36˝ length, with EAGLEbrite
®
zinc plating. Divider wires to provide 2˝ inside dimension and
4˝ up and down support. Adjustable in 1˝ increments. Each
shelving tier to hold up to 15 stencils. May be used with any
other wire shelving product on the same centers.
Design and Construction Features
• One #ST1836Z-13 includes one bottom and one top shelf.
One #ST1836Z-13 is required for each tier.
• Each unit has (15) 2˝ (51mm) partitions.
• The stencil shelf may be used with any combination of
posts* and casters** that best meets your requirements.
• A stationary unit can be made conductive with the use of
optional aluminum split sleeves.
• A mobile unit may be made conductive with the use of
optional aluminum split sleeves and optional anti-static
drag chain.
• Zinc finish.
* See catalog sheet #EG01.00 for posts available.
** See catalog sheet #EG01.05 for casters available.
Options / Accessories
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
Stencil Shelves
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: [email protected]
MODELS:
ST1836Z-13
Aluminum split sleeves
Anti-static drag chain
A stencil shelf consists of one top
and one bottom partitioned shelf.
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Catalog Specification Sheet No.
EG07.08
Stencil Shelves
Item No.:
Project No.:
S.I.S. No.:
Rev. 12/08
Printed in U.S.A.
©2008 by Eagle Group
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Stencil Shelves
width length weight
model # in. mm in. mm lbs. kg capacity
ST1836Z-13* 18˝ 457 36˝ 914 48 21.8 holds (15) stencils
* Note: #ST1836Z-13 includes two shelves—one for top and one for bottom.
FRONT VIEW
(note: only bottom shelf shown)
TOP VIEW
SIDE VIEW
  • Page 1 1
  • Page 2 2

Eagle Group ST1836Z-13 Datasheet

Eagle Group
Brand
Eagle Group
Model
ST1836Z-13
Type
Datasheet

Eagle Group ST1836Z-13 is a stencil shelf that can be used to store and organize stencils. It has a 18˝ width x 36˝ length footprint and is made of EAGLEbrite® zinc plating. The shelf has 15 dividers to provide 2˝ inside dimension and 4˝ up and down support. The shelf is adjustable in 1˝ increments and can hold up to 15 stencils. It can be used with any other wire shelving product on the same centers. The shelf can be made conductive with the use of optional aluminum split sleeves.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents