Classic Exhibits TF-404 Setup Instructions

Classic Exhibits
Brand
Classic Exhibits
Model
TF-404
Type
Setup Instructions
www.classicexhibits.com
Step 1
Page 1 of 2
866.652.2100
© 2008
Order #XXXXX — TF-404 - Aero Table Top Sign Kit #5
NOTE :
PDF copies of your Setup Instructions are available @ www.classicexhibits.com
Use the Search Tool located on the lower left-hand corner of the Classic Home page.
Enter your 5-7 digit Order #. Search for Setup Instructions
search
6
2
3
4
2
1
Note: Attaching Back Graphics
Attach Graphic to Velcro by wrapping
the Graphic over the Top of the Upper Horizontal
and under the Bottom of the Lower Horizontal
Note: Attaching Front Graphics
Attach Graphic to Velcro by wrapping
the Graphic around the Left and
the Right Front Verticals
1
3
4
5
Plan View Iso View
Steps:
1) Attach Base Plates 1, 2, 3 and 4
to verticals 1, 2, 3 and 4 as shown.
2) Assemble pieces 5 thru 14 together
as shown.
7
910
8
12
11
14
13
** Occasionally spraying a silicon lubricant to the metal connections will make assembly easier.
Using Your Setup Instructions
The Aero TableTop Setup Instructions are created specifically for your configuration.
They include an exploded view of the frame which is sequentially numbered. We encourage
you to study the instructions before attempting to assemble your exhibit.
Push-button connectors and pre-connected horizontal sections make assembly very simple.
No tools are required.
Cleaning and Packing Your Display
1) Use care when cleaning aluminum extrusion or acrylic inserts. Use only non-abrasive cleaners.
2) Retain all packing material. It will make re-packing much easier and will reduce the likelihood of
shipping damage.
Connections are made by holding the button
down and sliding the red tube into the opposing tube
until it locks in place.
To disassemble, push button and pull or twist extrusions apart.
Push-Button
Push-Button
6 6
6
6
Numbered Label
Table Top Base Plate Connections
Push-Button
Base Plate Connections are made by holding the button down and sliding the red
tube into the opposing tube on base until it locks in place.
6
6
Base Plate
Frame
Frame
Base Plate
  • Page 1 1

Classic Exhibits TF-404 Setup Instructions

Classic Exhibits
Brand
Classic Exhibits
Model
TF-404
Type
Setup Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents