Croydex AP506105 User manual

Brand
Croydex
Model
AP506105
Type
User manual

This manual is also suitable for

Croydex AP506105:

The Croydex AP506105 is a modern stainless steel grab bar designed to provide support and stability in bathrooms, showers, and other areas where additional support is needed.

It features a durable stainless steel construction that is resistant to rust and corrosion, ensuring longevity and reliability. The grab bar has a maximum safe working load of 100kg, making it suitable for supporting individuals with limited mobility or those who require additional assistance.

Installation is straightforward and requires only basic tools. The grab bar can be mounted on solid brick, concrete block walls, or similar strong materials.

Croydex AP506105:

The Croydex AP506105 is a modern stainless steel grab bar designed to provide support and stability in bathrooms, showers, and other areas where additional support is needed.

It features a durable stainless steel construction that is resistant to rust and corrosion, ensuring longevity and reliability. The grab bar has a maximum safe working load of 100kg, making it suitable for supporting individuals with limited mobility or those who require additional assistance.

Installation is straightforward and requires only basic tools. The grab bar can be mounted on solid brick, concrete block walls, or similar strong materials.

123
Twist to release the covers from the wall
brackets.
Hold the grab bar in position, ensure it is level
and mark the top hole on one of the wall
brackets.
Use a drill to create a screw hole where you
have marked and insert a wall plug.
MET 018 R03
x2 100kg
MAX
15st
10lbs
1. Always take care when using power tools, particularly if there is any water in the
working area.
2. For dierent wall types you will need to ensure that you are using the correct type
of fixing for the material of the wall. Wall fixings are not supplied with this product.
3. This product must only be fitted to solid brick, concrete block walls or similarly
strong materials oering appropriate support for the maximum safe working load.
4. When drilling into a tiled surface do not use a hammer drill.
5. Always use a drill bit that is suitable for the surface that is being drilled.
6. To retain the best quality finish, clean product regularly with a soft damp cloth.
7. Do not use abrasive or chemical cleaners, as these will damage the product.
8. The maximum safe working load for the product is 100kg distributed evenly.
9. Always wear suitable eye protection when drilling.
10. Always use a Residual Current Circuit Breaker (RCCB).
SAFETY & CARE FITTING PACK NOT SUPPLIED
x8
x8
x1
MAX
This leaflet is applicable to both angled and
straight grab bars.
ALWAYS CHECK THE PACKAGING FOR FIXINGS AND PARTS BEFORE RECYCLING
OR DISPOSAL.
ENSURE YOU HAVE ALL THE FIXINGS AND PARTS BEFORE ATTEMPTING TO
ASSEMBLE OR FIT THIS PRODUCT.
CONTACT DETAILS
UK: Metlex, Central Way, Andover,
Hampshire, SP10 5AW, UK
EU: MIL, Unit 8, Purcellsinch Ind Est,
Dublin Road, Kilkenny, R95 HP71, Ireland
Tel: +44 (0)1264 365881
Email: [email protected].uk
www.metlex.co.uk
Modern Stainless Steel Grab Bars
AP5061**MT*
AP5062**MT*
AP5063**MT*
AP5064**MT*
13 14 15
910 11
12
Remove the grab bar from the wall plates.
Screw both of the wall plates into position. Place the grab bar onto the studs on the
mounted wall plates.
Tighten the grab bar to the wall plates using the
hexagonal nuts which were removed earlier.
Verify that the grab bar is level and mark the
remaining 6 screw holes.
Rotate the mounted wall brackets and drill out
the remaining screw holes. Once drilled insert
wall plugs into the screw holes.
Push and rotate to secure the covers in place.
Ensure you test the product before use.
8Screw the wall plate into the wall and then lift
the grab bar onto the mounted wall plate.
4 5 6 7
Mount the wall plate onto the wall. Do not insert
the screw fully.
Rest the grab bar onto the mounted wall plate
and rotate until the grab bar is level. Once
level mark the top screw hole on the other wall
bracket.
Remove and retain hexagonal nuts securing the
wall plate and the wall bracket together on only
one side of the grab bar.
x1
Allow the grab bar to rotate and then drill the
screw hole and insert another wall plug.
  • Page 1 1
  • Page 2 2

Croydex AP506105 User manual

Brand
Croydex
Model
AP506105
Type
User manual
This manual is also suitable for

Croydex AP506105:

The Croydex AP506105 is a modern stainless steel grab bar designed to provide support and stability in bathrooms, showers, and other areas where additional support is needed.

It features a durable stainless steel construction that is resistant to rust and corrosion, ensuring longevity and reliability. The grab bar has a maximum safe working load of 100kg, making it suitable for supporting individuals with limited mobility or those who require additional assistance.

Installation is straightforward and requires only basic tools. The grab bar can be mounted on solid brick, concrete block walls, or similar strong materials.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents