Toro Floormat Kit, TimeCutter Riding Mower Installation guide

  • Hello! I've reviewed the installation instructions for the Toro Floormat Kit TimeCutter 161-4528. This document includes essential steps for preparing both gas and electric models of the TimeCutter riding mower before installing the floormat. It details the necessary safety precautions. I'm ready to answer any questions you might have about the installation process.
  • What should I do before installing the floormat on a gas model?
    What are the initial steps for installing the floormat on an electric model?
    Do I need to remove the battery packs when installing the floormat on an electric model?
3465-305A
Floormat Kit
TimeCutter® Riding Mower
Model No. 161-4528
Installation Instructions
Preparing the Machine
Gas Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the PARK position.
4. Shut off the machine and remove the key.
5. Wait for all moving parts to stop.
6. Allow machine components to cool.
Preparing the Machine
Electric Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the NEUTRAL position.
4. Engage the parking brake.
5. Shut off the machine and remove the key.
6. Wait for all moving parts to stop.
7. Allow machine components to cool.
8. Remove the battery packs from the machine.
© 2023—The Toro®Company
8111 Lyndale Ave So
Bloomington, MN 55044
Register at www.Toro.com Original Instructions (EN)
Printed in the USA
All rights reserved *3465-305*A
Installing the Floormat
Place the floormat onto the platform as shown.
G462035
Page 2 3465-305 A
/