2. Toro
  3. Floormat Kit, TimeCutter MyRide Riding Mower

Toro Floormat Kit, TimeCutter MyRide Riding Mower Installation guide

  • I have reviewed the installation instructions for the Toro TimeCutter MyRide 161-4529 Floormat Kit. The document provides detailed steps for both gas and electric models, including critical safety measures. I am ready to answer your questions about this product and installation process.
  • What should I do before installing the floormat on a gas model?
    What is the first step for preparing an electric model for floormat installation?
    What additional step is required for electric models?
3465-327A
Floormat Kit
TimeCutter® MyRide® Riding Mower
Model No. 161-4529
Installation Instructions
Preparing the Machine
Gas Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the PARK position.
4. Shut off the machine and remove the key.
5. Wait for all moving parts to stop.
6. Allow machine components to cool.
Preparing the Machine
Electric Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the NEUTRAL position.
4. Engage the parking brake.
5. Shut off the machine and remove the key.
6. Wait for all moving parts to stop.
7. Allow machine components to cool.
8. Remove the battery packs from the machine.
© 2023—The Toro®Company
8111 Lyndale Ave So
Bloomington, MN 55044
Register at www.Toro.com Original Instructions (EN)
Printed in the USA
All rights reserved *3465-327*A
Installing the Floormat
Secure the floormat to the platform as shown.
G460906
Page 2 3465-327 A
/