2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Toro
  6. Floormat Kit, TimeCutter Riding Mower

Toro Floormat Kit, TimeCutter Riding Mower Installation guide

  • Hello! I've reviewed the installation instructions for the Toro Floormat Kit TimeCutter 147-8765. This document details the steps for preparing your mower, whether it's a gas or electric model, and how to properly install the floormat using the included plastic plugs. I'm ready to answer any questions you have about the installation process or the contents of this document.
  • How many floormats are included in the kit?
    How many plastic plugs are included in the kit?
    What is the first step for preparing a gas model?
Form No. 3465-775 Rev A
Floormat Kit
T imeCutter
®
Riding Mower
Model No. 147-8765
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty .
Use
No parts required
–
Prepare the machine.
Floormat 1
Plastic plug 8
Install the oormat.
Preparing the Machine
Gas Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
NEUTRAL -LOCK position.
4. Shut of f the engine and remove the key .
5. W ait for all moving parts to stop.
6. Allow machine components to cool.
Electric Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
NEUTRAL position.
4. Engage the parking brake.
5. Shut of f the machine and remove the key .
6. W ait for all moving parts to stop.
7. Allow machine components to cool.
8. Remove the battery packs from the machine.
© 2023—The T oro® Company
81 1 1 L yndale A venue South
Bloomington, MN 55420
Register at www .T oro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3465-775*
Installing the Floormat
Secure the oormat to the platform using the plastic plugs.
g467787
Figure 1
g467788
Figure 2
2
/