Toro Floormat Kit, MyRide TimeCutter Riding Mower Installation guide

Toro
Brand
Toro
Model
Floormat Kit, MyRide TimeCutter Riding Mower
Category
Wall & ceiling mounts accessories
Type
Installation guide
Form No. 3465-860 Rev A
Floormat Kit
MyRide
®
T imeCutter
®
Riding Mower
Model No. 147-8764
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty .
Use
No parts required
–
Prepare the machine.
Floormat 1
Plastic plug 4
Install the oormat.
Preparing the Machine
Gas Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
NEUTRAL -LOCK position.
4. Shut of f the engine and remove the key .
5. W ait for all moving parts to stop.
6. Allow machine components to cool.
Electric Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
NEUTRAL position.
4. Engage the parking brake.
5. Shut of f the machine and remove the key .
6. W ait for all moving parts to stop.
7. Allow machine components to cool.
8. Remove the battery packs from the machine.
© 2023—The T oro® Company
81 1 1 L yndale A venue South
Bloomington, MN 55420 Register at www .T oro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3465-860*
Installing the Floormat
Secure the oormat to the platform using the 4 plastic plugs.
g469333
Figure 1
2
  • Page 1 1
  • Page 2 2

Toro Floormat Kit, MyRide TimeCutter Riding Mower Installation guide

Toro
Brand
Toro
Model
Floormat Kit, MyRide TimeCutter Riding Mower
Category
Wall & ceiling mounts accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents