Brickcom EoC-1000M User manual

Brickcom
Brand
Brickcom
Model
EoC-1000M
Category
Security device components
Type
User manual
Ethernet over Coax
EoC-1000M & EoC-1000S
User’s Manual
Quality Service Group
- -
Product name:
Ethernet over Coax
(EoC-1000M & EoC-1000S)
Release Date:
2013/07
Manual Revision:
V1.0
Web site:
www.brickcom.com
Email:
technical@brickcom.com
info@brickcom.com
© 2013 Brickcom Corporation. All Rights Reserved
- -
EoC-1000-series Overview
EoC-1000M
EoC-1000S
Ethernet port
24V 2.7A
Power Socket
Ethernet LED
Data +
Power(OUT)
Data LED
Data LED
Ethernet LED
Power LED
Ethernet port
12V 1A
(Power out)
Data +
Power(IN)
- 3 -
Installation
1. First, Connect an Ethernet cable into the device Ethernet port and Computer or NVR.
2. Connect EoC-1000M and EoC-1000S with a coaxial cable.
3. Connect EoC-1000S’ Ethernet port and IP Camera with an Ethernet cable
4. Connect power cord into 12VDC out port and IP CAM power port.
5. Finally, plug in the 24V 2.7A power supply to EoC-1000M’s power port.
※1. Please note to plug in the power supply is must be the Final step.
2. When you replace EoC-1000S, please re-plug in the power supply.
LED Signal
1. Power LED: Green light
2. Data LED: Green light and blinks when data transmission.
3. Ethernet LED: Green light and blinks when data transmission.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Brickcom EoC-1000M User manual

Brickcom
Brand
Brickcom
Model
EoC-1000M
Category
Security device components
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents