Sony NV-U81T Owner's manual

NV-U81T/U80 2-695-878-11 (1)

2-695-878-11(1)

Personal Navigation System

BLUETOOTH

Hands-free Manual

NV-U81T

NV-U81

NV-U80

Personal Navigation System

Sony Corporation Printed in Thailand

GB

BLUETOOTH Hands-free

Manual

DE

Handbuch zur

BLUETOOTH-

Freisprechfunktion

FR

Manuel de la fonction

BLUETOOTH mains

libres

IT

Manuale della funzione

vivavoce BLUETOOTH

NL

BLUETOOTH Handsfree-

handleiding

ES

Manual de manos libres

BLUETOOTH

SE

Användarhandbok för

BLUETOOTH-handsfree

PT

Manual mãos livres

BLUETOOTH

NV-U81T/U80 2-695-878-11 (1)

IMPORTANT NOTICE!

Safe and efﬁcient use

Changes or modiﬁcations to this unit not

expressly approved by Sony may void the

user’s authority to operate the equipment.

Please check for exceptions, due to national

requirement or limitations, in usage of

BLUETOOTH equipment before using this

product.

Driving

Check the laws and regulations on the use of

mobile (cellular) phones and hands-free

equipment in the areas where you drive.

Always give full attention to driving and pull

off the road and park before making or

answering a call if driving conditions so

require.

Radio frequency exposure

RF signals may affect improperly installed or

inadequately shielded electronic systems in

cars, such as electronic fuel injection

systems, electronic antiskid (antilock)

braking systems, electronic speed control

systems or air bag systems. For installation

or service of this device, please consult with

the manufacturer or its representative of your

car. Faulty installation or service may be

dangerous and may invalidate any warranty

that may apply to this device.

Consult with the manufacturer of your car to

ensure that the use of your mobile (cellular)

phone in the car will not affect its electronic

system.

Check regularly that all wireless device

equipment in your car is mounted and

operating properly.

Connecting to other devices

When connecting to any other device, please

read its user guide for detailed safety

instructions.

Emergency calls

This BLUETOOTH car hands-free and the

electronic device connected to the hands-free

operate using radio signals, mobile (cellular)

phone, and landline networks as well as user-

programmed function, which cannot

guarantee connection under all conditions.

Therefore do not rely solely upon any

electronic device for essential

communications (such as medical

emergencies).

Remember, in order to make or receive calls,

the hands-free and the electronic device

connected to the hands-free must be

switched on in a service area with adequate

cellular signal strength.

Emergency calls may not be possible on all

mobile (cellular) phone networks or when

certain network services and/or phone

features are in use.

Check with your local service provider.

2

Display messages

The language used for button names and

display messages in this manual is British

English. Some button names or display

messages may differ when American

English is the selected language setting.

Table of Contents

3

Introduction 4

What is BLUETOOTH technology? . .4

Available BLUETOOTH functions. . .5

3 steps to BLUETOOTH

function . . . . . . . . . . . . . . . . . . . . . .5

Before using the

BLUETOOTH function 6

Menu operations of the BLUETOOTH

function . . . . . . . . . . . . . . . . . . . . . .6

Actuating the BLUETOOTH

function . . . . . . . . . . . . . . . . . . . . . .6

Pairing and connecting this unit with a

mobile phone. . . . . . . . . . . . . . . . . .7

Connecting with a mobile phone

from this unit. . . . . . . . . . . . . . . . . .7

Connecting with this unit from a

mobile phone. . . . . . . . . . . . . . . . . .8

Connecting to registered mobile

phones . . . . . . . . . . . . . . . . . . . . . . .9

Hands-free talking 10

Making calls. . . . . . . . . . . . . . . . . . . 11

Making a call in other ways. . . . . 11

Receiving calls . . . . . . . . . . . . . . . . . 13

Other operations 13

Setting a password for the phone

book . . . . . . . . . . . . . . . . . . . . . . . 13

Using the Preset Dial . . . . . . . . . . . . 14

Storing the Preset Dial. . . . . . . . . 14

Deleting the Preset Dial. . . . . . . . 14

Using the phone book. . . . . . . . . . . . 14

Receiving phone book data from a

mobile phone . . . . . . . . . . . . . . . . 14

Deleting from the phone book. . . 15

Other settings . . . . . . . . . . . . . . . . . . 15

Phone Settings menu . . . . . . . . . . 15

Call Settings menu. . . . . . . . . . . . 16

Additional information 16

Precautions. . . . . . . . . . . . . . . . . . . . 16

Specifications. . . . . . . . . . . . . . . . . . 18

Troubleshooting . . . . . . . . . . . . . . . . 18

4

Introduction

What is BLUETOOTH

technology?

BLUETOOTH wireless technology is a

short-range wireless technology that

enables wireless data communication

between digital devices, such as a mobile

(cellular) phone and a headset.

BLUETOOTH wireless technology

operates within a range of about 10 m (30

ft). Connecting two devices is common,

but some devices can be connected to

multiple devices at the same time.

You do not need to use a cable for

connection since BLUETOOTH

technology is a wireless technology,

neither is it necessary for the devices to

face one another, such is the case with

infrared technology. For example, you can

use such a device in a bag or pocket.

BLUETOOTH technology is an

international standard supported by

millions of companies all over the world,

and employed by various companies

worldwide.

5

Available BLUETOOTH

functions

• Hands-free talking with your mobile

phone in the car (supported incoming/

outgoing call) – HFP

• Phone book transfer from your mobile

phone – OPP

BLUETOOTH profiles

Profiles are the standardization of the

functions for each BLUETOOTH device

specification.

This unit supports the following profiles:

HFP (Hands-free Profile): Talking on the

phone/Operating the phone by hands-free.

OPP (Object Push Profile): Transferring

phone book data from a mobile phone to

this unit.

3 steps to BLUETOOTH

function

Pairing (page 7)

First, register (“pair”) a

BLUETOOTH device (mobile

phone) and this unit with each other.

Once pairing is established, there is

no need for pairing again.

continue to next page t

6

BLUETOOTH connection

(

page 9)

Connection starts automatically.

Depending on the BLUETOOTH

device, some operation may be

required to make the BLUETOOTH

connection.

Talking on the phone (page 10)

You can make and receive a call by

operating this unit.

Before using the

BLUETOOTH function

Menu operations of the

BLUETOOTH function

The BLUETOOTH settings can be

configured from the Phone Settings

menu.

For details on menu operations and

keyboard operations, see the supplied

“Quick Start Guide.”

Actuating the

BLUETOOTH function

Before connecting to a mobile phone,

set “Bluetooth Signal” to “On”

(page 15).

1 Touch “Phone” in the top

menu.

The BLUETOOTH function menu

appears.

2 Select “Phone Settings.”

3 Set “Bluetooth Signal” to

“On.”

4 Set “Discoverable” to “On.”

7

Pairing and connecting

this unit with a mobile

phone

When connecting with a mobile phone

for the first time, mutual registration is

required. This is called “pairing.” This

registration (pairing) is required only

for the first time, as this unit and the

mobile phone will recognize each other

automatically from the next time. Once

a passkey is input, input of the passkey

will not be required from the next time.

(Depending on the model of your

mobile phone, you may need to input a

passkey for each connection.)

Connecting with a mobile

phone from this unit

Check that the mobile phone is set to

allow for searching (discoverable)

beforehand.

1 Touch “Phone” in the top

menu.

2 Select “Phone Settings” c

“Connect Phone” c “New

Registration.”

3 When “Search for Phone”

appears, select “OK.”

The process of searching for a

connectable mobile phone begins,

then the detected mobile phone

name(s) appear in a list. If a mobile

phone name cannot be received,

“Unknown” will be displayed.

Search time varies depending on the

number of mobile phones.

4 Select the mobile phone to

connect.

Pairing starts.

continue to next page t

8

5 Input a passkey*.

Input the same passkey for this unit

and the connecting mobile phone.

The passkey can be either your own

selected number or the number

determined by the connecting

mobile phone.

For details, see the manual of the

connecting mobile phone.

6 Touch “Done” to confirm.

“Connected” appears and

connection is complete.

Depending on the model of your

mobile phone, the connection may

also require an operation on the

mobile phone.

* Passkey may be called “passcode,” “PIN

code,” “PIN number” or “Password,” etc.,

depending on the mobile phone.

Connecting with this unit

from a mobile phone

Check that “Discoverable” in the Phone

Settings menu is set to “On” (page 15).

1 Set the connecting mobile

phone to search.

A list of BLUETOOTH devices

appears in the mobile phone’s

display.

2 Select the model name of the

unit from the list.

3 Input the passkey on the

mobile phone.

“Passkey Input” appears in the unit’s

display.

4 Select “OK.”

5 On this unit, input the same

passkey that you input in step

3.

Depending on the model of your

mobile phone, the connection may

also require an operation on the

mobile phone.

9

Notes

• While connecting to a mobile phone, this

unit cannot be detected from another

mobile phone. To be detected, disconnect

the current connection and search for this

unit from another mobile phone.

• Depending on the model of your mobile

phone, searching from this unit may not

be possible. In this case, search for this

unit from the connecting mobile phone.

• If you search for this unit and the

connecting mobile phone mutually at the

same time, this unit will not recognize the

connecting mobile phone.

• It may take time to search or connect.

• Depending on the model of your mobile

phone, the confirmation display of the

connection appears before inputting the

passkey.

• The time limit for inputting the passkey

differs depending on the model of your

mobile phone.

• Although this unit can be paired with up to

8 mobile phones without inputting a

passkey, some mobile phones may

require the input of passkey.

• This unit cannot be connected to a mobile

phone that supports only HSP (Head Set

Profile).

Connecting to registered

mobile phones

Mobile phones are registered once

paired and connected with this unit.

When the unit is turned on, the last

connected mobile phone is

automatically connected. To connect

with another registered mobile phone,

do the procedure below.

1 Touch “Phone” in the top

menu.

2 Select “Phone Settings” c

“Connect phone” c “New

registration.”

3 When “Search for Phone”

appears, select “OK.”

The list of registered mobile phones

appears.

4 Select the mobile phone to

connect.

“Connected” appears and

connection is complete.

Depending on the model of your

mobile phone, the connection may

also require an operation on the

mobile phone.

continue to next page t

10

About the connection

indicator

The indicator appears in the display of

this unit during BLUETOOTH

connection.

Notes

• For details on the settings of mobile

phones, see their respective manuals.

• Up to 8 passkeys can be stored. Storage

of a passkey after the 8th will result in the

automatic deletion of the oldest passkey.

Tip

You can delete all passkeys on a connected

mobile phone. From the top menu, select

“Phone” c “Phone Settings” c “Connect

Phone” c “Clear Connecting Info.”

Hands-free talking

Check that this unit and the mobile

phone are connected beforehand

(

page 7).

Note

The microphone of this unit is located on the

top left of the front panel. Do not mask the

microphone with tape, etc.

Tip

You can switch a call received on your

mobile phone to the unit. Select “Use

Hands-free” from the call menu. Similarly,

you can switch a call received on the unit to

your mobile phone. Select “Use Mobile

Phone” in the display during the call.

11

Display during a call

1 To adjust the volume.

2 To return to map display.

3 To end calls.

4 To switch a call received on the unit

to your mobile phone.

5 To switch to the numeric keyboard.

Making calls

You can make a call from the connected

mobile phone by operating this unit.

1 Touch “Phone” in the top

menu.

2 Select “Make a Call” c

“Numeric Input.”

3 Input the phone number.

4 Touch to start the call.

You can also call from the following

menus.

“Recent Calls”/“Phone Book”/“POI

Search”/“Call Destination”/“P1 - P3”

(Preset Dial)/ (Home)

To end calls

Touch “End Call.”

Making a call in other ways

Recent Calls

Selects from the recent call history.

(Maximum storable name and phone

numbers: 40)

Select the name or phone number to

call.

Select “Options” c “Delete Recent

Calls” to delete the name and phone

number or “Delete All Recent Calls” to

clear the history.

12

Phone Book*

Selects from the phone book list.

(Maximum storable name and phone

numbers: 500)

Select the name and phone number to

call.

For details on how to store in the phone

book, see “Using the phone book” on

page 14.

* If you set the security (page 13),

“Security Locked” appears and operation

is not possible.

Preset Dial

Selects the phone number stored in a

number button.

Select a preset number (P1 – P3).

By storing a phone number to Preset

Dial beforehand, you can easily make a

call to that phone number. Up to 3

phone numbers can be stored.

For details on how to store in the

number buttons, see “Using the Preset

Dial” on page 14.

(Home)

Makes a call to your home.

Touch .

You can easily make a call to your

home by registering your home phone

number beforehand.

You can store your home phone

number using the Startup

Configuration Wizard or the setting

menu.

POI Search

Selects from the POI list.

Select “Call POI.”

Call Destination

When you set a destination using POI

search and a phone number is

registered for that POI, you can make a

call to the destination.

Select “Call Destination.”

13

Receiving calls

When receiving a call, the ring tone is

output from the unit’s speaker.

When receiving a call, touch

“Answer.”

The phone call starts.

The built-in microphone of this unit will

pick up your voice.

To reject a call

Touch “Reject.”

Other operations

Setting a password for

the phone book

You can secure personal information in

the phone book by setting a 4-digit

password.

If you set the security, “Security

Locked” appears and operation is not

possible.

1 Touch “Phone Settings” in the

BLUETOOTH function menu.

2 Select “Phone Book

Password.”

3 Set “Password Lock” to “On.”

4 Input the password number,

then touch “i.”

5 Input the same password

number, then touch “i.”

To unlock the security

Set to “Off” in step 3, then input the

password number.

14

Using the Preset Dial

Storing the Preset Dial

1 Touch “Phone Settings” in the

BLUETOOTH function menu.

2 Select “Edit Home / Presets.”

3 Select the preset number (P1 –

P3) to store.

4 Select “New Input” from the

menu.

5 Input a phone number, then

touch “i.”

6 Input a name, then touch “i.”

Tips

• You can also store a phone number in the

phone book to the Preset Dial. Select

“Copy from Phone Book” in step 4, then

select the name and phone number to be

copied.

• To replace a registered preset number,

select “Edit” in step 4, then do steps 5 and

6.

Deleting the Preset Dial

1 Touch “Phone Settings” in the

BLUETOOTH function menu.

2 Select “Edit Home / Presets.”

3 Select the preset number (P1 –

P3) to delete.

4 Select “Clear” from the menu.

5 Select “OK.”

Using the phone book

Receiving phone book data

from a mobile phone

Check that this unit and the mobile

phone are connected beforehand

(page 7).

1 Touch “Phone Settings” in the

BLUETOOTH function menu.

2 Select “Connect Phone” c

“Receive Phone Book.”

A confirmation display appears.

3 Select “OK.”

“Receiving…” appears while

receiving the phone book data.

You cannot talk on the phone while

the phone book data is being

transferred.

15

Deleting from the phone

book

1 Touch “Phone Book” in the

BLUETOOTH function menu.

2 Select “Options” c “Delete

Items.”

3 Select the item to be deleted

from the list, then select

“Delete.”

4 Select “OK.”

To clear all phone book data

From the BLUETOOTH function

menu, select “Phone Book” c

“Options” c “Delete Entire Phone

Book.” After clearing, confirm that all

phone book data has been cleared

properly.

Other settings

Phone Settings menu

“z” indicates the default settings.

Bluetooth Signal

To switch the BLUETOOTH signal

output of this unit to “On” or “Off.”

– “On”: to output the BLUETOOTH

signal (RF 2.4 GHz).

–“Off” (z): to not output the

BLUETOOTH signal (RF 2.4 GHz).

Be sure to set to “On” when you

connect to the mobile phone.

Discoverable

To allow mobile phones to search for

this unit.

– “On”: to allow the mobile phone to

search.

–“Off” (z): to not allow the mobile

phone to search.

Be sure to set to “On” when you search

for/connect to this unit from the mobile

phone.

continue to next page t

16

Call Settings menu

“z” indicates the default settings.

* Depending on the model of your mobile

phone, this unit’s ring tone may be output

even if set to “Mobile.”

Additional information

Precautions

On BLUETOOTH communication

• BLUETOOTH wireless technology

operates within a range of about 10 m

(about 30 ft).

Maximum communication range may

vary depending on obstacles (person,

metal, wall, etc.) or electromagnetic

environment.

• When using the BLUETOOTH function,

install the unit at a place within 60 cm

(about 20 in) from the driver.

• The following conditions may affect the

sensitivity of BLUETOOTH

communication.

– There is an obstacle such as a person,

metal, or wall between this unit and

mobile phone.

– A device using 2.4 GHz frequency,

such as a wireless LAN device,

cordless telephone, or microwave

oven, is in use near this unit.

Call / Ring Volume

To preset the volume level of the ring

tone.

Touch b / B to adjust the volume level.

Ring Tone

To switch the ring tone.

– “Mobile*”: to output the ring tone set

with the mobile phone.

– “Internal” (z): to output this unit’s

ring tone.

Noise / Echo Cancellation

To reduce echo and noise in phone call

conversations.

Set to “Mode 1” (z) normally. If the

quality of the outgoing sound is

unsatisfactory, set to “Mode 2” or

“Off.”

17

• Because BLUETOOTH devices and

wireless LAN (IEEE802.11b/g) use the

same frequency, microwave interference

may occur and resulting in

communication speed deterioration,

noise, or invalid connection if this unit is

used near a wireless LAN device. In

such as case, perform the following.

– Use this unit at least 10 m (about 30 ft)

away from the wireless LAN device.

– If this unit is used within 10 m of a

wireless LAN device, turn off the

wireless LAN device.

– Install this unit and mobile phone as

near to each other as possible.

• Microwaves emitting from a

BLUETOOTH device may affect the

operation of electronic medical devices.

Turn off this unit and the mobile phone

in the following locations, as it may

cause an accident.

– where inflammable gas is present, in a

hospital, train, airplane, or a petrol

(gas) station

– near automatic doors or a fire alarm

• This unit supports security capabilities

that comply with the BLUETOOTH

standard to provide a secure connection

when the BLUETOOTH wireless

technology is used, but security may not

be enough depending on the setting. Be

careful when communicating using

BLUETOOTH wireless technology.

• We do not take any responsibility for the

leakage of information during

BLUETOOTH communication.

• Connection with all mobile phones

cannot be guaranteed.

– A mobile phone featuring

BLUETOOTH function is required to

conform to the BLUETOOTH

standard specified by BLUETOOTH

SIG, and be authenticated.

– Even if the connected mobile phone

conforms to the above mentioned

BLUETOOTH standard, some mobile

phones may not be connected or work

correctly, depending on the features or

specifications of the mobile phone.

– While talking on the phone hands-free,

noise may occur, depending on the

model of your mobile phone or

communication environment.

• Depending on the mobile phone to be

connected, it may require some time to

start communication.

Others

• Using the BLUETOOTH device may not

function on mobile phones, depending

on radio wave conditions and location

where the equipment is being used.

• If you experience discomfort after using

the BLUETOOTH device, stop using the

BLUETOOTH device immediately.

Should any problem persist, consult your

nearest Sony dealer.

18

Specifications

Wireless Communication

Communication System:

BLUETOOTH Standard version 2.0

Output:

BLUETOOTH Standard Power Class 2

(Max. +4 dBm)

Maximum communication range:

Line of sight approx. 10 m (32.8 ft)*

1

Frequency band:

2.4 GHz band (2.4000 – 2.4835 GHz)

Modulation method: FHSS

Compatible BLUETOOTH Profiles*

2

:

HFP (Hands-free Profile)

OPP (Object Push Profile)

*1 The actual range will vary depending on

factors such as obstacles between

devices, magnetic fields around a

microwave oven, static electricity,

reception sensitivity, antenna’s

perfomance, operating system, software

application, etc.

*2 BLUETOOTH standard profiles indicate

the purpose of BLUETOOTH

communication between devices.

Design and specifications are subject to

change without notice.

Troubleshooting

The following checklist will help you

remedy problems you may encounter with

your unit.

Before going through the checklist below,

check the connection and operating

procedures.

The connecting mobile phone cannot

detect this unit.

• Set “Bluetooth Signal” to “On” (page 15).

• Set “Discoverable” to “On” (page 15).

• While connecting to the mobile phone, this

unit cannot be detected from another

mobile phone. Disconnect the current

connection and search for this unit from

another mobile phone.

This unit cannot detect the

connecting mobile phone.

Check the BLUETOOTH setting of the

connecting mobile phone.

19

Connection is not possible.

• Depending on the model of your mobile

phone, searching from this unit may not be

possible.

t Search for this unit from the mobile

phone.

• Depending on the status of the mobile

phone, searching from this unit may not be

possible.

t Search for this unit from the mobile

phone.

• Check the pairing and connection

procedures in the manual of the mobile

phone, etc., and perform the operation

again.

• Go to the Sony website to verify that the

mobile phone model is one that can be

connected to this unit.

The name of the detected mobile

phone does not appear.

Depending on the status of the mobile

phone, it may not be possible to obtain the

name.

No ring tone.

• Adjust the volume in “Call / Ring Volume”

(page 16).

• Depending on the connecting mobile

phone, the ring tone may not be sent

properly.

t Set “Ring Tone” to “Internal”

(page 16).

The caller’s voice volume is low.

Adjust the volume by touching +/– in the

display (page 11).

Echo or noise occurs in phone call

conversations.

• Lower the volume.

• “Noise / Echo Cancellation” is set to “Off.”

t Set “Noise / Echo Cancellation” to

“Mode 1” or “Mode 2” (page 16).

• If the ambient noise other than the phone

call sound is loud, try reducing this noise.

E.g.: If a window is open and road noise,

etc., is loud, shut the window. If the air

conditioner is loud, lower the air

conditioner.

The sound quality of the caller’s voice

is poor.

Phone sound quality depends on reception

conditions of mobile phone.

t Move your car to a place where you can

enhance the mobile phone's signal if the

reception is poor.

Some functions do not work.

Check that the connecting mobile phone

supports the functions in question.

The name of the other party does not

appear when a call is received.

• The other party is not stored in the phone

book.

t Store in the phone book (page 14).

• The calling phone is not set to send the

phone number.

Pairing failed in Time Over.

Depending on the connecting mobile phone,

the time limit for pairing may be short. Try

completing the pairing within the time.

20

No sound is output from the unit’s

speaker during hands-free call.

If the sound is output from the mobile

phone, set the mobile phone to output the

sound from the unit’s speaker.

Support site

See the back cover of the supplied

“Quick Start Guide.”

Page is loading ...

Sony NV-U81T Owner's manual

This manual is also suitable for

Sony NV-U81T Owner's manual

in other languages

Related papers

Other documents