2. Home
  3. Lighting
  4. Stroboscopes & disco lights
  5. EQUINOX
  6. Fusion 100 Spot

EQUINOX Fusion 100 Spot, EQLED069 User manual

  • Hello! I am an AI chatbot trained to assist you with the EQUINOX Fusion 100 Spot User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Order code: EQLED069
Fusion 100 Spot
User Manual
www.prolight.co.uk Fusion 100 Spot User Manual
2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageis
between100~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLight
dealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thislightingxtureisforprofessionaluseonly-itis
notdesignedfororsuitableforhouseholduse.The
productmustbeinstalledbyaqualiedtechnicianin
accordancewithlocalterritoryregulations.Thesafetyof
theinstallationistheresponsibilityoftheinstaller.The
xturepresentsrisksofsevereinjuryordeathduetore
hazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingto
EN62471.Donotviewthelightoutputwithoptical
instrumentsoranydevicethatmayconcentratethebeam.
• WARRANTY:Oneyearfromdateofpurchase.
www.prolight.co.uk Fusion 100 Spot User Manual
3
Product overview & technical specications
TheEquinoxFusion100Spotisacompact,feature-packedxtureideal
formobileapplicationsaswellasinstallation.Theengineofthisxture
isapowerful80WwhiteLED(max.),whichgeneratessharpbeamsand
patterns.Awheelwith7coloursplusopenallowsforrichhuestosaturate
theFusion100Spotsbeam,whilearotatinggobowheelwith5rotating
gobosincludingheartsandstarsplusopenaddstothearmouryof
on-boardeffects.Alsocrammedinsidethiscompacthousingisa3facet
circularprismandamotorisedfocustokeeptheprojectedimagesharpat
anydistance.WithaforwardfacingshowthisxtureisidealformobileDJs.
•1x80WwhiteLED(max.)
•Beamangle:10°
•13,200Lux@2m(fullon)
•Motorisedfocus
•3facetprism
•Gobowheel:5rotatinggobos+open
•Colourwheel:7colours+open
•DMXchannels:5or15selectable
•Auto,soundactiveand
master/slavemodes
•Pan:540°,Tilt:210°
•0-100%dimmingandvariablestrobe
•Suppliedwithhangingbracket
•4pushbuttonmenu
withLEDdisplay
•IECpowerinput
•3-PinXLRinput/output
•Fancooled
Fusion 100 Spot
Specications
Powerconsumption 90W
Powersupply 100~240V,50/60Hz
Fuse F2A250V
Dimensions 330x198x146mm
Weight 4.4kg
Ordercode EQLED069
330mm
198mm
146mm
0m 1m 2m 3m 4m 5m
10° - Lux 52800 13200 5870
10°
3300 2110
www.prolight.co.uk Fusion 100 Spot User Manual
4
Technical specications
MENU
MIC
DOWN UP ENTER
DMX INPUT DMX OUTPUT
POWER INPUT:
100-240V~50/60Hz
FUSE: F2A
www.prolight.co.uk
03
02 01 04 05 07 06 08
01-LEDdisplay
02-Functionbuttons
03-Microphone
04-DMXinputsocket
05-DMXoutputsocket
06-IECpowerinputsocket
07-FuseF2A250V
08-Fan
Inthebox:1 x xture,
1 x power cable,
1 x hanging bracket,
1 x eye bolt
& 1 x user manual
www.prolight.co.uk Fusion 100 Spot User Manual
5
Operating instructionsOperating instructions
A 0 0 1
A 5 1 2
A 0 0 1
DMX address setting
5 C h
1 5 C h
C H N d
Channel modes
N A s t
S L 1
S L N d
Master/slave mode
H I s P
L o S P
S P N d
Pan/tilt speed setting
S H 1
S H 4
S H N d
Show modes
o n
o F F
S o u n
Sound mode on/off
o n
o F F
P A n
Pan invert
o n
o F F
t I L
Tilt invert
o n
o F F
d I S P
Display invert
0 0 0
1 0 0
N I C
Sound sensitivity
o n
o F F
r F A C
Reset factory settings
F
r
0 0 0
1 2 0
0 0 0
1 2 0
g
0 0 0
1 2 0
P
d E L E
t
C
0 0 0
1 2 0
0 0 0
1 2 0
0 0 0
1 2 0
r S t
Motor reset
MENU
A d t
Home position setting
www.prolight.co.uk Fusion 100 Spot User Manual
6
Operating instructions
DMX mode:
OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes
tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitof
thextureandeachxtureindependently.
ToaccesstheDMXaddressmode,pressthe“MENU”buttononthefrontoftheunittoshow
A001ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”
buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
DMX channel mode:
ToaccesstheDMXchannelmode,pressthe“UP”buttononthefrontoftheunittoshowCHNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
oneofthe5or15DMXchannelmodes.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
PLEASE NOTE:WhentheunitisreceivingDMXtherstreddotonthedisplaywillash.
5 channel mode:
Channel Value Function
CH1 000-255 Panadjustment0-540°
CH2 000-255 Tiltadjustment0-210°
CH3
000-007 Nofunction
008-047 LEDMacro1
048-087 LEDMacro2
088-127 LEDMacro3
128-167 LEDMacro4
168-207 LEDMacro5
208-247 LEDMacro6
248-255 Soundactive
CH4
000-007 Nofunction
008-058 Pan/tiltMacro1
059-110 Pan/tiltMacro2
111-162 Pan/tiltMacro3
163-240 Pan/tiltMacro4
241-255 Soundactive
CH5
000-050 Nofunction
051-100 Highspeedmotormovement
151-200 Lowspeedmotormovement
251-255 Reset(10seconds)
www.prolight.co.uk Fusion 100 Spot User Manual
7
Operating instructions
15 channel mode:
Channel Value Function
CH1 000-255 Panadjustment0-540°
CH2 000-255 Panneadjustment
CH3 000-255 Tiltadjustment0-210°
CH4 000-255 Tiltneadjustment
CH5 000-255 Pan/tiltspeed
CH6 000-255 Masterdimmer(0-100%)
CH7
000-009 Blackout
010-245 Strobe(slow-fast)
246-255 LEDon
CH8
000-013 Open(white)
014-031 Red
032-049 Yellow
050-067 Cyan
068-085 Green
086-103 Orange
104-121 Magenta
122-130 Blue
131-139 Open(white)
140-195 Rainboweffect(fast-slow)
196-199 Rotationstop
200-255
Reverserainboweffect
(slow-fast)
CH9
000-008 Open(white)
009-033 Gobo1
034-058 Gobo2
059-083 Gobo3
084-108 Gobo4
109-133 Gobo5
134-194 Rainboweffect(fast-slow)
195-255
Reverserainboweffect
(slow-fast)
Channel Value Function
CH10
000-009 Rotationstop
010-129
Forwardgoborotation
(fast-slow)
130-134 Rotationstop
135-255
Reversegoborotation
(slow-fast)
CH11 000-255 Focus
CH12
000-007 Open(white)
008-255 Prism
CH13
000-007 Nofunction
008-047 LEDMacro1
048-087 LEDMacro2
088-127 LEDMacro3
128-167 LEDMacro4
168-207 LEDMacro5
208-247 LEDMacro6
248-255 Soundactive
CH14
000-007 Nofunction
008-058 Pan/tiltMacro1
059-110 Pan/tiltMacro2
111-162 Pan/tiltMacro3
163-240 Pan/tiltMacro4
241-255 Soundactive
CH15
000-050 Nofunction
051-100 Highspeedmotormovement
151-200 Lowspeedmotormovement
251-255 Reset(10seconds)
PLEASE NOTE:
Highspeedmotormovementissuitablefor
highenergyshows.Forsmoothmovement
pleaseselectlowspeedmotormovement.
Gobos:
Open Gobo1 Gobo2 Gobo3 Gobo4 Gobo5
www.prolight.co.uk Fusion 100 Spot User Manual
8
Pan/tilt speed setting:
Toaccessthepan/tiltspeedsetting,pressthe“UP”buttononthefrontoftheunittoshowSPNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenHISP(fast)orLoSP(slow).Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Master/slave mode:
Tosetthemasterunit,pressthe“UP”buttononthefrontofthemasterunittoshowSLNd ontheLED
display.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseNast.Press
the“ENTER”buttontoconrmthesetting.Thenselectyourdesiredprogram(soundactiveoroneofthe
showmodes).
Tosettheotherunitsinslavemode,pressthe“UP”buttononthefrontoftheunittoshowSLNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
eitherSL 1.Pressthe“ENTER”buttontoconrmthesetting.Theunitwillnowruninsequencewith
themasterunit.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.
Show mode:
Toaccesstheshowmodes,pressthe“UP”buttononthefrontoftheunittoshowShNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenSH 1~SH 4.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
SH 1 – full show
SH 2 – slow show 1
SH 3 – slow show 2
SH 4 – forward facing show
Sound/sound sensitivity:
Toturnthesoundmodeonoroff,pressthe“UP”buttononthefrontoftheunittoshowSounonthe
LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetween
onor oFF.Pressthe“ENTER”buttontoconrmthesetting.
Toadjustthesoundsensitivity,pressthe“UP”buttononthefrontoftheunittoshowNIC onthe
LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetween
000~100.Value: 000 - 100 (000 = low, 100 = high)
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Operating instructions
www.prolight.co.uk Fusion 100 Spot User Manual
9
Operating instructions
Pan invert setting:
Toaccessthepaninvertsetting,pressthe“UP”buttononthefrontoftheunittoshowPAn
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenonoroff.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Tilt invert setting:
Toaccessthetiltinvertsetting,pressthe“UP”buttononthefrontoftheunittoshowtIL
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenonoroff.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Display invert setting:
Toaccessthedisplayinvertsetting,pressthe“UP”buttononthefrontoftheunittoshowdISP
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenonoroff.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Reset factory settings:
Toresettheunitsfactorysettings,pressthe“UP”buttononthefrontoftheunittoshowrFAC
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
betweenon(reset)orofF.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Pan/Tilt/Zoom home position:
Toaccessthepan/tilt/focushomepositionsetting,pressthe“UP”buttononthefrontoftheunitto
showAd tontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”
buttonstoselectdELE(defaulthomeposition),P(panhomeposition),t(tilthomeposition),
C(colour),g(gobo),F(focushomeposition),andr(rotationhomeposition).
WhenondELE,pressthe“ENTER”buttonandtheunitshomepositionswillberesettothefactory
default(000).
WhenonP,t,C,g,Forr,pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonsto
adjustthevaluebetween000~120.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Motor reset:
Toresetthemotors,pressthe“UP”buttononthefrontoftheunittoshowrStontheLEDdisplay.
Pressthe“ENTER”buttontoperformthereset.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
www.prolight.co.uk Fusion 100 Spot User Manual
10
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”
from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel
indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas
addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105
and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe
chainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent
xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.
DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”
XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether
andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.
ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest
cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe
DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein
aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda
DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,
nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.
YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,
seeimagebelow.
Also remember that DMX cable must be daisy chained and cannot be split.
DMX setup
FurtherDMXcablescanbe
purchasedfromallgoodsound
andlightingsuppliersor
ProLightConceptsdealers.
Pleasequote:
CABL10 – 2m
CABL11 – 5m
CABL12 – 10m
www.prolight.co.uk Fusion 100 Spot User Manual
11
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables
shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs
outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,
youmayneedtouseaterminatoron
thelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures
maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa
3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmission
problemsandinterferance.itisalways
advisabletoconnectaDMXterminal,
(resistance120Ohm1/4W)betweenpin2
(DMX-)andpin3(DMX+)ofthelastxture.
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup
www.prolight.co.uk Fusion 100 Spot User Manual
12
WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
/