Zenith SENTRY 2 SY2751 Operating Manual & Warranty

Brand: Zenith

Model: SENTRY 2 SY2751

Type: Operating Manual & Warranty

This manual is also suitable for

Zenith SENTRY 2 SY2751 is an easy-to-use TV that provides a great viewing experience. With its simple controls and intuitive menu system, you'll be able to set up and enjoy your new TV in no time. The TV features a variety of picture and sound settings, so you can customize your viewing experience to your liking. You can also connect external devices, such as DVD players and game consoles, to the TV's multiple input ports. With its sleek design and powerful performance, the Zenith SENTRY 2 SY2751 is the perfect TV for any home.

THE QUALITY GOES IN BEFORE THE NAME GOES ON

Return the

Pro duc t

Registration

Card and your

TV could be

FREE

cycledpaper

)ercent

!_iilbii_!_i_:I_:__

so para nuestros

hispana:

)rmaci6n que

manual!

SAFETY TIPS

14. Outdoor Antenna Grounding 18.

If an outside antenna or cable system is connected

to the product, be sure the antenna or cable system

is grounded so as to provide some protection

against voltage surges and built-up static charges.

Article 810 of the National Electrical Code

(U.S.A.), ANSI/NFPA 70 provides information 19.

with regard to proper grounding of the mast and

supporting: structure, grounding of the lead-in wire

to an anlenna discharge unit, size of grounding con-

ductors, location of antenna-discharge unit,

connection to grounding electrodes, and require- 20.

ments for the grounding electrode.

EXAMPLE OF GROUNDING ACCORDING TO

NATIONAL ELECTRICAL CODE INSTRUCTIONS

Ground

Antenna Lead in Wire

Antenna Discharge Unit

(N EC Section 810-20)

Grounding Conductors

(NEC Section 810-21)

_] Ground Clamps

Power Service Grounding

Electrode System (NEC

Art 250, Part H)

NEC - NATIONAL ELECTRICAL CODE

15. Lightning

For added protection for this product (receiver) dur-

ing a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the product

due to lightning and power-line surges.

16. Power Lines

An outside antenna system should not be located in

the vicinity of overhead power lines or other elec-

tric ligh_ or power circuits, or where it can fall into

such power lines or circuits. When installing an out-

side antenna system, extreme care should be taken

to keep from touching such power lines or circuits

as contact with them might be fatal.

17. Overloading

Do not overload wall outlets and extension cords as

this can result in a risk of fire or electric shock.

Object and Liquid Entry

Never push objects of any kind into this product

through openings as they may touch dangerous volt-

age points or short-out parts that could result in a

fire or electric shock. Never spill liquid of any kind

on the product.

Servicing

Do not attempt to service ':his product yourself as

opening or removing covers may expose you to dan-

gerous voltage or other hazards. Refer all servicing

to qualified service persorneI.

Damage Requiring Service

Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the

following conditions:

a. If the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen

into the',product.

c. If the product has beer exposed to rain or water.

d. If the product does not operate normally by fol-

lowing the operating instructions. Adjust only

those controls that are covered by the operating

instructions as an improper adjustment ,of other

controls may result in damage and will often re-

quire extensive work Ey a qualified technician

to restore the produc, t Io its normal operation.

e. If the product has beer dropped or the cabinet

has been damaged.

f. If the product exhibits a distinct change in per-

formance.

21. Replacement Parts

When replacement parts are required, be sure the

service tec]hnician has used replacement parts speci-

fied by the manufacturer or have the same

characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or

other hazards.

22. Safety Check

Upon completion of any service or repairs to this

product, ask the service technician to perform

safety checks to determine that the product is in

proper operating condition.

23. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling

only as recommended bl¢ the manufacturer.

24. Heat

The product should be situated away from heat

sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce

heat.

ENGSAF4 iv

CONTENTS

SAFETY WARNINGS

SAFETY TIPS

INTRODUCTION

Welcome .............................................. vi

Installation Considerations ................................ vi

STANDARD CONNECTIONS FOR YOUR TV

Cmmection Center. ..................................... l- 1

Connection Options ..................................... 1-1

WttAT YOU SHOULD DO FIRST

Connect The Power ..................................... 2-1

lns_:allThe Batteries Into The Remote Control ................ 2-1

Select Your Language ................................... 2-1

Use Auto Program ...................................... 2-1

Set The Clock .......................................... 2-2

Use Other Menu Options ................................. 2-2

GIST TO KNOW THE TV'S CONTROL PANEL

Control Panel Functions ................................. 3-1

Basic Menu Operation Using The Control Panel .............. 3-1

REMOTE CONTROL MODEL SC34921SC3493

Operation ............................................. 4-1

Installing Batteries ...................................... 4-1

REMOTE CONTROL MODEL SC34901SC3491

Operation ............................................. 5-1

Ingtalling Batteries ...................................... 5-I

QUICK REFERENCE TO ON-SCREEN MENUS

Available Menus ....................................... 6-1

Basic Menu Operation Using The Remote Control ............ 6-1

SETUP MENU

Menu Operation ......................................... 7-1

Auto Program ......................................... %1

Ch. Add/Del ........................................... 7-1

Clock Set ............................................. 7-1

Timer Setup .......................................... 7-1

Caption/Text ........................................... 7-I

Audio Mode .......................................... 7-1

Language .............................................. 7-1

Using Ch. Add/Del ..................................... 7-2

Timer Setup: Sleep Timer ................................ 7-2

Timer Setup: On/Off Timer ............................... 7-2

VIDEO MENU

Menu Operation ........................................ 8-1

SOURCE MENU

Menu Operation ........................................ 9-1

Antenna/Cable Source ................................... 9-1

Video Source .......................................... 9-1

MAINTENANCE AND TROUBLESHOOTING

Caring For Your TV ................................... 10-1

Extended Absence .................................... IO- I

TV Picture Interference ................................ 10-1

Before Calling For Service .............................. 10-2

REPLACEMENT PRODUCT REGISTRATION CARD

AVISO PARA NUESTROS CLIENTES DE HABLA HISPANA

ACCESSORIES FOR YOUR TV

YOUR ZENITIt WARRANTY

SY1951, SY2551, SY2751 Features

q_his operating guide describes a family of TV models. Not all models have all of the features described in this guide. Different con-

trol panels may be used from model to model. Most models include the following features:

,, Audio/Video Input Jacks l" English, French, Spanish On-ScreerL Menus Option

,, SC3490/SC3491 Remote (Some TVs) I] Closed Captions

• SC3492/SC3493 Remote (Some TVs) On-Screen Picture Adjustments

• Sleep Timer • On-Screen Status Display

• On/Off Timer with Multiple Settings • Channel Add/Delete for Favorite C!aannel Scanning

• Stereo Audio l/* Last Channel Flashback

(Design and specifications are subject to change without prior notification.)

3047 (11-0 V

INTRODUCTION

WELCOME

Welcome into the family of Zenith Color Television owners.

This guide provides instructions on how to operate your new

TV. In addition, we strongly advise you to read and observe

the precautions listed in the Safety Tips section of this operat-

ing guide. Read this publication carefully so that you will re-

ceive full enjoyment from your new Zenith TV for many years

tO come.

Your new TV has been designed and built to give you the very

best in quality, features and performance. There are many re-

gional Zenith authorized service centers throughout the U.S.,

Canada and Mexico who can attend promptly and effectively

to ordinary service needs.

If you should have an unusual performance or service problem

that cannot be saaisfactorily resolved by your Zenith authorized

service centeL call or write:

Zenith Electronic2: Corporation

Customer Service Department

1000 Milwaukee Avenue

Glenview, IL 60025-2493

Telephone: (847)391-8752

Mon-FrL 8:00 a.m. - 4:30 p.m. Central Time

Send the model number, serial number, and date of purchase

or original installation, with a full explanation of the problem

and the service lnistory. We will ,welcome the opportunity to

look into your specific question or problem and to be of assis-

tance in resolving it promptly.

The model and serial numbers of your new TV are located on the

back of the TV cabinet. For your future convenience and protec-

tion, we suggest that you record these numbers here:

Model No.

SeriaI No.

INSTALLATION CONSIDERATIONS

Before you install your TV...

Ventilation -- Proper ventilation keeps your TV

running cool. Air circulates through perforations

in the back and bottom of the cabinet. Do not

block these vents or you will shorten the life of

your TV.

_k Power Source -- Your TV is designed to operate

on normal household current, 120 volt 60 Hertz AC.

1)o not attempt to operate it on DC current.

Power Cord -- Your power cord has a polarized

plug as required by Underwriters' Laboratories. It

!_as one regular blade and one wide blade and fits

only one way into a standard electrical outlet. If

the blades will not enter either way, your outlet is

very old and non-standard. A new outlet should be

installed by a qualified electrician.

Sate Operation -- Your TV is manufactured and

tested with your safety in mind. However, unusual

stress caused by dropping or mishandling, expo-

sure to flood, fire, rain or moisture, or accidental

spilling of liquids into the TV, can result in poten-

tial electrical shock or fire hazards. If this hap-

pens, have your TV checked by a service

technician before using it again.

Please read and observe each safety point in the "Safety

Tips" section when installing and using your TV.

VIDEO GAMES AND OTHER FIXED

PATTERN DISPLAY CAUTION -- If you use your TV for

video games or if you watch channels that continuously show

a logo or other fixed display, avcid setting the BRIGHTNESS

control for an excessively bright picture. A fixed display is

any image which does not change frequently, such as a chan-

nel network/identification or other symbol that remains in the

same location for long periods of time. A bright, fixed pattern,

if left on for long periods of time, can result in a permanent ina-

print on the TV picture tube. You can reduce thiis possibility

by alternating the use of the fixed pattern display with normal

TV picture viewing, by turning down the CONTRAST control

for sustained fixed pattern use, and by turning off the fixed pat-

tern display when not in use.

PLUGGING IN YOUR TV --- Be sure to plug your TV into

an "unswitched" AC power source. The "switched" AC out-

lets found on some video equipment will not continue supply-

ing power to the TV once the equipment is turned off. If the

power to the TV is interrupted, you will have to reset the clock

in the TV to the current time.

T_WEDIR3 vi

STANDARD CONNECTIONS FOR YOUR TV

m i

CONNECTION CENTER

VIDEO IN

Jacks for external audio and video input ,t-

from a stereo VCR or other A/V appli-

ance. (You must connect to these jacks in

order to hear stereo sound when using the

A/V appliance.)

Vl13_ IN

TV CONNECTION CENTER

ANTENNMCABLE

"--'_ 75-ohm antenna or cable-TV connection

to your TV. Attach your antenna, cable-

TV line or VCR to this jack.

CONNECTION OPTIONS

Yeur TV may be connected in many different ways. The following illustrations show the most common, and recommended connec-

tions for your new TV,

SETUPI: TVONLY

If you receive your television signal by antenna or basic cable-

TV (no cable bo:_), connect your television as follows:

_;abi e : iLeadingfroml. ! i : Connects to,

A Wall :lack- / TV- ,

75-ohm (round) cable I "ANTENNA/CABLE'

from Antenna or cable- (In) jack.

_ service.

1:3& e Not r_xluired.

NOTE:

UI If your antenna has a flat (300-ohm) wire leading from it, you

will have to attach this wire to a 300-75 ohm adapter before

the antenna can be connected to the "IV.

SETUP 2: 'IV AND CABLE BOX

If you receive your television signal from a cable box, connect

your television as follows:

Cable Leading from,. Connects to..

A Not required.

B Wall Jack- Cable Box-

75-o'hm (round) cable "In" Jack.

from Cable service.

C Cable Box- TV-

"Out" (75-ohm cable). "ANTENNA/CABLE"

(In) jack.

TURN OFF PO_'ER OR UNPLUG TV

BEFORE MAKING ANY CONNECTION!

Flatwire

from antenna ', TV CONNECTION (;ENTI-:R

(300 ohm) :

"rypical Cable Box o_rr

SETUP 1 and SETUP 2

_-_ 1 _ 1

STANDARD CONNECTIONS FOR YOUR "IV'

SETUP3: TVANDVCR

If you receive your television signal through your VCR, connect

our television as follows:

;able Leading from.. Connects to..

A Wall Jack- VCR-

75--ohmcable from "In" jack.

Antenna or cable service.

& C Not required.

D VCR-

"Out to TV" jack.

E VCR-

Audio/Video (A/V)

cables from "Video

Out," "Audio R Out"

and "Audio L Out" jacks

on the back of VCR.

Yg-

"ANTENNA/CABLE"

(In) jack.

TV-

Corresponding "Video,"

"Audio R" and "Audio L"

jacks on the back of the

TV.

NOTE:

_3 If your antenna has a flat (300-ohm) wire leading from it, you

will have to attach this wire to a 300-75 ohm adapter before the

antenna can be connected to the VCR.

SETUP 4: TV WITH VCR AND CABLE BOX

If you receive your television signal through your VCR, connect

our television as follows:

from.. _ Connects to..

Leading

Not required.

Wall Jack- Cable Box-

75-ohm cable from cable "In" jack.

service.

Cable Box-

"Oul:) (75-ohm cable).

VCR-

"Ou_ to TV"

(75-ohm cable)

VCR-

Audio/Video (A!V)

cables from "Video

Out." "Audio R Out"

and "Audio L Out" jacks

on the back of VCR.

VCR-

"In" jack.

TV-

"ANTENNA/CABLE"

(In) jack.

TV-

Corresponding "Video,"

"Audio R" and "Audio L"

jacks on the back of the

TV.

CABLE A

Flat wire

from antenna

(300 ohm)

300/75 ohm

Adaptor

..... _ ...... r - ""

TV BACK

Typical Cable Box

SETUP 3 and SETUP 4

3o47-o!-o 1 -- 2

WHAT YOU SHOULD DO FIRST

I I I

_) CONNECT THE POWER

AI'_.,I_ you have connected the necessary cable(s) to the _1

jacks on the back the TV, plug your TV's power cord into an

AC outlet. Make sure you do not plug the TV into a

"switched" outlet (an outlet that is controlled by a switch).

Do not plug TV into switched outlet on a

VCR or cable-TV decoder

_" INSTALL THE BATTERIES INTO THE REMOTE CONTROL

Batteries are provided for the remote, but they must be installed befl)re it can be used.

To install the batteries

1. Open the battery compartment by sliding the cover toward the

end of the remote.

2. Take the batteries and match plus with plus (+ with +), minus

with minus (- with -) with the markings shown in the battery

compartment.

3. Replace the compartment cover.

Notes:

Q Do not place heavy objects on top of the remote control keys.

Prolonged unintentional operation of the remote shortens battery

life.

8 Remove the batteries if the remote contlol will not be used for a

month or more. THE REMOTE CONTROL MANUFACTURER IS NOT

RESPONSIBLE FOR DAMAGE CAUSED BY BATTERY LEAKAGE.

Remote Control Battery Compartment

(Uses 2 size ,_A batteries)

(3_ SELECT YOUR LANGUAGE

Your TV has on-screen menus which can appear in one of

t_ee languages; English, Spanish or French. Select the lan-

guage that you would be most comfortable with.

To select a LANGUAGE

1. Press MENU repeatedly to view the Setup Menu.

2. Use SELECT (Up/Down) arrow to select Language.

3. Use ADJ (Left/Right) arrow to choose a language.

4. Press EbJTER to remove the menu from view,

Setup Menu

Auto Program

Ch, Add/Del

Cl(x_kSet

TimerSetup

Caption/Text

AudioMode

English

Setup Menu with Language Highlighted

I_ USE AUTO PROGRAM

The first time your TV is turned on, Auto Program will be se-

ilected in the Setup Menu. Auto Program finds all available

channels and stores them in the memory of the TV.

To start AUTO PROGRAM

1. Press MENU repeatedly to view the Setup Menu.

2. Use SELECT (Up/Down) arrow to select Auto Program.

3. Use ADJ (Left/Right) arrow to advance to the next menu.

4. Use SELECT (Up/Down) arrow to choose either

OFF AIR ANTENNA or CABLE TV.

5. Use ADJ (Left/Right) arrow to begin the channel search.

Setup Menu

Ch.Add/Del

Clock Set

Ti mar Setup

CaptiorVText

Audio Mode

Language

[4_ ToProgra_L ]

Setup Menu with Auto Program Highlighted

...... 2_1

WHAT YOU SHOULD DO FIRST

m i

SET THE CLOCK

To set the clock

1. Press MENU repeatedly to view the Setup Menu.

2. Use Select (Up/Down) arrow to select Clock Set.

3. Use the numbered buttons on your remote control to enter the

correct time and press the TIMER key to select A.M. or P.M.

(You can also use ADJ (Left/Right) arrow to change the 24 hour

clock to the correct time.)

4. Press ENTER to remove the menu from view.

Setup Menu

Auto Program

h_b_A.AddlDel

Clock Set

Timer Setup

Caption/Text

Audio Mode

Language

[10:30 AM _{_i1_

Press TIMER to

choose AM/PM.

Setup Menu with Clock Set Highlighted

_;_ USE OTHER MENU OPTIONS

You may want 'to use the following options:

Create your own personal list of favorite channels foruse with

the channel Up/Down keys. Refer to the Ch. Add/Del option

for details.

[] Adjust options in the Video Menu.

"._7.o 2 -- 2

GET TO KNOW THE TV'S CONTROL PANEL

CONTROL PANEL FUNCTIONS

The control panel shown here may be slightly different from the one on your TV, but the operation of the controls are the same.

The majority of the TV's features may be operated using the control panel on the TV. However, to fully appreciate all of the fea-

tures built in to the TV, such as last channel FLASHBACK and volume MUTE, use the supplied remote control.

ENTER SELECT VOLUME Up/Down OFF-,ON

Press to see the Channel!Time display. Press during on-screen menu Press to increase or decrease the Press to turn TV

operations to select a menu sound level, power ON!or OFF.

,\ opuo.. ;/ /

,.o.°,, o,o o,,.,,y"

/ /

ADJUST Left/Right

Press during on--screen menu opera-

tion to adjust the selected menu

option.

Press once to see a menu. Press re-

peatedly to sequence through the

other available menus,

CHANNEl, Up/Down

Press to select channels higher or

lower than the current channel. To

add or delete channels stored i a the

scanning sequence, see CH. Add/Del

option.

Remote Window

Point the remote control

towards this window to

operate the TV.

BASIC MENU OPERA TION USING THE CONTROL PANEL

Press ADJUST (Left/

Right) arrow key to adjust

the selected menu option.

Press MENU repeatedly to

choose between available

menus.

ENTER '4ADJUSTb" SELECT MENU

Press ENTER to remove

menus from 'view or wait a

few seconds and the menu

will disappear by itself.

Press SELECT repeatedly to

highlight the menu option

you want to select.

Selector

Setup Menu

Auto Program

Oh. Add/Del

Clock Set

15mer Setup

Caption/Te>:t

Audio Mode,

Statusof

:selected option.

[ English ___j

l_xam " '

pie of Selected ' Menu option.

REMOTE CONTROL MODEL SC3492/SC3493

OPERATION

The remote control provides access to all on-screen menus, as well as, access to special features that can not be access_ by using

the control panel on the TV.

POWER

Turns TV ON or OFF.

Accesses closed captions on

some TVs. _

TIMER

Accesses Sleep Timer Menu.

VOLUME Up/Down

Use to adjust the sound level.

Numbered Keys

Use for direcl channel tuning.

MENU, SELECT and ADJUST

Use with anyon-screen menu to see a menu,

select an option, and to adjust that option.

Point toward TV

POWER

1 2 3

ooo

4 5 6

o0o

7 8 9

ooo

0 ENTER

MUTE

Press ta turn off sound while the

picture remains. Press again to re-

store the sound.

FLASIIBACK

Press to view previously selected

channel.

CHANNEL Up/Down

Selexztsa TV channel by going Up

or D own through channels pro-

grarrmaed in the TV memory.

ENTER

Use to view the Channel£Fime Dis-

play or to remove any on-screen

menu or display.

SC3492/SC3493

124-213-00

221-1007A

INSTAL1.1NG BATTERIES

Batteries are provided, but must be installed before using the

remote control. When the effective range of your remote becomes

noticeably shorter, replace the batteries with two (2) high quality,

a)kaline, size AA batteries. Match + with +, - with -.

Note: The manufacturer is net responsible for damage caused

by battery leakage.

UShtab in to

s,.7-o 4 _ 1

REMOTE CONTROL MODEL SC3490/SC3491

I I I

OPERA TION

This remote control provides access to all on-screen menus, as well as, access to special features that can not be accessed by using

the control panel on the TV.

Point toward TV

Accesses closed captions on

some TVs,

Numbered Keys

Selects a number for direct

channel tuning,

ENTER

Use to view the Channel/Time

Display or to remove any on-screen

menu or display.

TIMER

Use to activate the SLEEP TIMER.

MENU, SELECT and ADJUST

Use with any on-screen menu to see a menu,

select an option, and to adjust that option.

[]

1 2 3

C3 CD CD

4 5 6

CD (Z3 (Z3

7 8 9

C3 CD CD

0 INTER

C53

ADJ _ ADJ

OFF/ON

Turns TV ON orOFF,

CHANNEL Up/Down

Selects a TV channel by going Up

or Down through channels pro-

grammed in the TV memory.

VOI.UME Up/Down

Adjusts the volume level.

MUTE

Turns off sound while the picture

remains. Press again to restore the

seund.

FLASHBACK

Returns to the last "IV channel

you were watching.

INSTALLING BA'i-rERIES

Batteries are: provided, but must be installed before using the

remote control. When the effective range of your remote becomes

noticeably shorter, replace the batteries with two (2) high quality,

alkaline, size AA batteries. Match + with +, - with -.

Note: The manufacturer is not responsible for damage caused

by battery leakage.

_,_5.o 5- 1

QUICK REFERENCE TO ON-SCREEN MENUS

A VAIl.ABLE MENUS

Your TV is menu operated. In other words, adjustments to the TV are made via a list of choices which appear on your TV screen.

To view these menus, press the MENU key on the remote control. Press MENU repeatedly to view _:heavailable menus.

Setup Menu

[Auto Program ]

Oh. Add/Del

Clock Set

Timer Setup

Caption/Text

Audio Mode

Language

Video Menu

Contrast

Brightness

Color

Tint

Sharpness

Picture Pref

Source Menu

,_ource ]

Press _ Press _

MENU MENU

BASIC MENU OPERATION USING THE REMOTE CONTROL

The remote control keys which are most frequently used for menu operations are shown here. In addition to these keys, the number

keys may also be used where a number vi:lue is necessary, such as setting the time in the TV.

Press MENU repeatedlyto

choose between available

meIluS.

Use SELECT (Up/Down)

arrow key to move the

highlight to the menu op-

tion you want to select.

(2)

ENTER

ME22_,

CD \

Press ENTER toremove

menusfrom view orwait a _""'_

fewseconds and the menu

will disappearby itself.

Use AIDJ (Left/Right)

arrow key to adjust the

selected menu option.

Typical Remote Control Shown

........ 6 -- 1

SETUP MENU

• I I

Setup Menu

[Auto Program

Oh. Add/Del

Clock Set

Timer Setup

Captioni'[bxt

Audio Mode

Language

To Program

Setup Menu

Clock Set

Timer Setup

Caption/Text

Language

] [10:30 AM

Setup Menu with Antenna/Cable Source Selected

Setup Menu with ¥ideo Source Select_M

MENU OPERATION

Press MENU repeatedly until the

Setup Menu is shown.

Press ADJ (Left/l;'Jght) arrow to

adjust the selecteA opdon.

Press SELECT (Up/Down) arrow

until the desired option is selected.

ENTER

SELECT

Press ENTER or 'wait a few sec-

cnds for the TV to return to normal

c,peration.

Menu Option Function Of Menu Option

Auto Program Finds all active channels and stores them in the TV's memory for use by the CHANNEL Up/Down keys.

Ch. Add/Del Edits the channel numbers found by the Auto Program feature to create your own list of favorite channels when

using the CHANNEL Up/Down keys. See the information following this chart for details.

Clock Set Sets the clock in the TV to the correct time Use numbered keys on the remote to enter time or press ADJ

(Left/Right) arrow keys to set the 24-hour clock. Press TIMER on the remote to specify A.M. or P.M.

Timer Setup Sets the TV's Sleep Timer and On/OffTimer features. See the information follcwing this chart for de.mils.

Caption/CFext

Audio Mode

Displays closed captioning or informational text when available on the selected channel. Options are: Off,

Caption 1, Caption 2, Caption 3, Caption 4, Text 1, Text 2,, Text 3, and _[ext 4. (At present, few TV

programs or video tapes offer text captioning for any option other than CAPTION 1. Therefore, CA_I'ION 1 is

the only recommended choice, unless you know that a specific program is providing captioning using one of the other

selections.) Pressing CC while in Text mode will turn Captions and Text off.

Mono Directs the same sound to both Left and Right speakers, even if the program being received is

in stereo.

Stereo Directs the sound to the Left and Right speakers as supplied by tLteprogram source (broadcast

TV/VCR, etc.).

Note: Audio options are not available while VIDEO is the selected source. The audio signal being received

from an auxiliary source (VCR/Laser Disk, etc.) is assumed to be stereo.

Language Selects the language used for on-screen menus. Languages available include: English, Spanish or French.

continued on next page

_._7o 7 -- 1

SETUP MENU

USING CH. ADDADEL

To Add or Delete Channels: .....

1. Select Ch. Add/Del.

2. Select a channel using the number keys or with the CHANNEL Up and Down keys.

3. Use ADJ (Left/Right) arrow to choose either Added or Deleted.

Added: These channels are tuned when using the CHANNEL Up and Down arrow keys.

Deleted: These channel are not tuned when using the CHANNEL Up and Down keys. However, "Deleted" channels may be tuned directly

by entering the channel number with the number keys on the remote control.

T#MER SETUP: Sleep Timer

The Sleep Timer programs the TV to automatically turn itself off after a period from 15 minutes up to z. hours.

From Setup Menu

1. Make sure the TV's clock is set.

2. Select Timer Setup and press ADJ

(Left/Right) arrow to view Timer Menu,

3. Select Sleep Timer.

4, Press ADJ (Left/Right) arrow repeatedly to

set the period of time the TV will remain

on.

Direct From Timer Button

Press TIMER on the remote control.

Press TIMER repeatedly to set the

period of time the TV will remain on.

One minute befc,re the TV turns off, the GOOD NIGHT display appears on the screen. At

this time you have a choice of the following two actions:

a. Do nothing, TheTV will turn itself off in one minute.

h. Delay the turn-off by pressing the TIMER key.

NOTES:

rn Before the Tiraer Menu can be viewed, you must set the time on the TV.

See "WHAT YOU SHOULD DO FIRST" for details.

El To cancel the SLEEP TIMER, turn off the TV or press the Timer key repeatedly

until OFF is :showing.

77rtl_r Menu

[Sleep "firner

Oa'firne

Off Time

Orv'Off "firr_r

] l

:30

Sleep Timer set to turn TV

off in 30 minutq_.

Good NigA_t

60 Seconds

"Good Night" display appears

60 second,; before shut-off and counts

down,

7"IMER SETUP: On/Off Timer

The ON/OFT: "HMER is a feature which programs the TV to turn itself On at a specific time then turn itself Off at another time.

Set On/Off Timer

"1. Make sure dae TV's clock is set.

1.). Select Timer Setup and press ADJ (Left/Right) arrow to view Timer Menu.

3. Select On Time and use the numbered keys on your remote to enter a time for the

TV to ttun itself ON. Press TIMER on the remote to select A.M. or P.M.

4. Select Off'rime and use the numbered keys on your remote to enter a time for the

TV to turn itself OFF. Press TIMER on the remote to select AM. or P.M.

!5. Select On/Off Timer and use ADJ (Left/Right) arrow to show ON.

_5. Press ENTER on your remote control to remove the menu from view.

Timer Monu

Sleep-firqer

On-lime . .

CXl!C__rner ] I ]

On/Off Timer set to turn TV on

at 11:00 a.m. and off at 1:00 p.m.

Notes:

[] A time must be set for "Off Time" in order to turn the timer ON.

[] Before Tinu_r Menu can be viewed, you must set the time on the TV. See "WHAT YOU SHOULD DO F'IRST" for details.

31}47O 7 -- 2

VIDEO MENU

B I

Video Menu

I Contrast

Brightness

Color

-tint

Sharpness

Picture Pref

MENU OPERATION

Press MENU repeatedly until the

Video Menu is shown.

Press ADJ (Left/Right) arrows to

adjust the selected option.

Press SELECT (Up/Down) arrows

until the desired option is selected.

ENTER

SELECT

Press ENTER or wait a few seconds

for the TV to return to normal

operation.

Menu Option Function of Menu Option

Contrast Adjusts the overall light to dark characteristics of the color level of the picture,

Brightness Adjusts the overall brilliance of the picture from very dim to very bright

Color Adjusts the intensity of the colors in the picture.

Tint Adjusts the color of the flesh tones to more Red or more Green.

Sharpness Adjusts the definition of the object edges for best picture quality.

Picture Pref. Selects the video adjustments to be used:

(Preference) (CUSTOM = your personal adjustment preferences; PRESET = factory set adjustments.)

Notes:

O All adjustments on the Video Menu are optional. It is not

necessary to use these features in order to operate the TV.

[] Any adjustments made to the Video Menu settings while

Picture Pref. is in "Preset" mode will automatically store

the current settings as the "Custom" setting,

R__I

SOURCE MENU

Source Menu

[Source 1 Antenna/Cable

_, Press ADJ (LeftgRight) arrow to

change source.

ll/IENU OPERATION

The Source menu allows you to choose the input source for the TV picture and sound. There are two choices you can make: An-

tenna/Cable or Video.

Press MENU repeatedly until the _ MSource Menu is shown.

Press ENTER or wait a few seconds

for the TV to return to normaI

operation.

Press ADJ (Left/Right) arrow to \\ _t_ _

change source.

Menu Option Function Of Menu Option

Antenna/Cable Uses the input from the Antenna/Cable Jack on the TV Connection Center as the source of the TV picture and

sound.

Video Uses the input from the Video/Audio-L and Audio-R jacks on the TV Connection Center as the source of the TV

picture and sound.

Note: When "Video" is selected as the source of the TV picture and sound, the Setup Menu options are minimized;

Auto Program, Ch Add/Del and Audio Mode will not be available.

...... 11___1

MAINTENANCE AND TROUBLESHOOTING

CARING FOR YOUR "IV

Your TV will look better, have a longer life and perform better

if you care tot it properly.

First check to see that the TV is off. For added

_k safety, unplug the TV from the power outlet.

NOTE: If you unplug your TV, you will have to

reset the clock to the current time.

Cabinet Care

Non-Wood Cabinet or Cabinet Components Moisten a soft

cloth with a mild soap solution or Ivory dishwashing deter-

gent. Wipe the surface with a damp cloth. Then rinse the cloth

in clean water and wipe the surface again. Allow the "IV to air-

dry before turning it on.

Wood Cabinets or Cabinet Components Use any good fur-

niture cleaner and polish. Regular care will help preserve the

finish.

Picture Glass Cleaning

The picture tube face attracts dust particles and should be

cleaned regularly. To clean the 5ace, spray a small amount of

glass cleaner on a cleaning cloth and wipe the picture tube

glass face until clean. Repeat if necessary.

To delay new dust accumulation, wet a soft cloth in lukewarm

water in which a little fabric sol!tener or Ivory dishwashing de-

tergent has been mixed. Wring the cloth almost dry. Wipe the

glass face. Make sure no drops of moisture are:squeezed onto

the glass. Do not wipe the glass dry. Allow the glass to air-dry

before you turn the 'IV on agai a.

EXTENDED ABSENCE

Before an extended absence (such as a vacation) you may

want to unplug the power cord from the electrical wall outlet.

This will protect the TV from possible damage from lightning

or power line surges. If you have an outdoor antenna, you may

also want to disconnect the antenna lead-in wires on the back

of the TV,

NOTE: If you unplug your TV, you will have to reset the

clock to the current time.

TV PICTURE INTERFERENCE

Your TV picture may be affected by interference caused by

one or a nmnber of factors. These include:

Speckled or Streaked Picture Can be caused by nearby auto-

mobile ignition, electrical appliances, etc. This is most notice-

able in weak signal areas.

Snow in Picture Caused by insufficient signal. Usually

caused by the TV being located too far from the TV station or

by an improper antenna installation.

Ghosts or Reflections Caused by signals being reflected

from surrounding building:s, water tanks, or other high struc-

tures.

Radio Signal Police, amateur or CB radio transmitters may

cause interference.

These interference probleras can often be corrected through

the use of a better antenna, signal amplifiers;, or various filter

devices. See your TV dealer for additional information, and

available TV accessories.

WCARDI2 10 -- 1

MAINTENANCE AND TROUBLESHOOTING

m II

BEFORE CALLING FOR SERVICE

Check these items and see if you can correct the trouble by changing the adjustment of a menu option or tightening the cxmnoztionof a

cal)le. By performing a simple inspection before calling for service, you may save time and money.

PROBLEM TRYTHIS : ......

Sound OK. F'oor picture. Re-orient antenna. Try another channel -- possible station trouble.

Adjust Video Menu options. Trouble with cable-TV system? Is

antem_a/cable connection loose?

No picture or sound. Is TV on? Is there power in wall outlet? Is TV plugged in'? Is antenna

hooked up? Is cable hooked up? Trouble with cable-TV system?

Check auxiliary audio/video equipment. C.heck channel selection.

Picture blurred or distorted. Ghost in picture. Check antenna or cable hook up for broken wires. Try another channel

-- possible station trouble. Check for local interference.

No color, or poor color. Is it a color program? Check antenna or cable hook up for broken wires.

Adjust Video Menu options.

No sound. Volume setting may be too low. Check MUTE key operation on remote

control.

Cannot select ,zertain channels. Channels may be skipped in Ch. Add/I)el option of Setup Menu.

No closed captions Are captions available? Is Caption 1,2, 3 OR 4 selected using the

CaptionfFext option on the Setup Menu?

Black or blue box covers half of screen. Is text information available? Is Text l, 2, 3 or 4 selected in the

CaptionfFext option ofthe Setup Menu.

Remote control does not work. Are batteries okay? Is TV turned ON? Is TV plugged in v.

Note:

El If your qW fails to respond to the PICTURE PREF. selection, or to any other menu selection, you must reset the 'IV. Simply dis-

connect the AC power cord from the power outlet. Wait a few minutes, then plug the "IN back into the power outlet. "You will

have to res,et the clock to the current time.

Always request that your technician use only

genuine Zenith exact replacement parts fi_r con-

tinued Quality and Safety performance.

KEEP YOUR ZENITH ALL ZENITH.

3c_so 10 -- 2

REPLACEMENT PRODUCT REGISTRATION CARD

You could win a full refund on your new Zenith product.

Look for the Product Registration Card on your new video

product.

Each month adrawing is held by Zenith from the completed

Product Regis_aationCards received during the preceding

month. Zenith will reimburse the winner for the full purchase

_rice of the product purchased.

In orderto p_icipate, simply complete and return the Product

Registration Card at once, even if you choose not to complete

the information and interests portion of the questionnaire.

The odds of winning the free drawing described above, de-

pend on the number of participants. Free drawing offer is

void in Canada and other places where restricted or prohib-

ited by law. Offer is void for Hotel/Motel and Institutional

models. Rental models are not eligible.

Product Card lost or misplaced?

The Product Registration Card furnished with your video prod-

uct is pre-printed with its Model and Serial numbers. Please

fill out the card and mail it at yotx earliest convenience. It is

imperative that Zenith know ho,_ to reach you promptly if we

discover a safety problem that would affect you. If the original

card has been lost or misplaced, i¢ou may use the replacement

card provided below. Either card will qualify you for the flee

drawing, but you are limited to only one entry in the drawing.

Complete the card, place it in an envelope and mail it to:

Zenith Electronics Corporation

P. O. Box 173257

Denver, CO 80217-3257

Use the replacement Product Registration Card only if the

original card has been misplaced or lost.

Zenith Product Registration Card H5Z01-01

Please Print Clearly or Type (_) Area Code Telephone

1.DMr. 2.[_Mrs. 3. DMs. 4.[_Miss [ I ] .J LJ_.___-I I I I [

First Name Initial Last Name

I I (I I IIII I I[__]l! I I I II!1

Street

IIIIIIlll!lllllllllll

City

llllllll!l!ll[(I ®

State Zip Code

1__1__1I I I I I I-I I } I I

II_IIII!L

Apt. No.

II_llll}

Date ol Purchase

Mo. Day Yr.

L_LJLII L_]_]

,.oo,Lllllllll II

NUMBER

Copy Numbers Here

From Label on Set

Please record the model number

and serial number from the sticker

on the back of you set.

TVCARD3

Page is loading ...

Zenith SENTRY 2 SY2751 Operating Manual & Warranty

Brand: Zenith

Model: SENTRY 2 SY2751

Type: Operating Manual & Warranty

This manual is also suitable for

Download PDF

report

Zenith SENTRY 2 SY2751 Operating Manual & Warranty

This manual is also suitable for

Zenith SENTRY 2 SY2751 Operating Manual & Warranty

Related papers

Other documents