DRAKE RMM12 Quick Manual

RMM12
DRAKE
Brand
DRAKE
Model
RMM12
Type
Quick Manual

DRAKE RMM12 is a rack mount system that supports a single Drake Power Supply and up to 12 modular Audio/Video modulators, allowing for the configuration of a professional-quality headend system that optimizes rack space. It can accommodate any combination of Drake Video Modulators, Video Switching modules, and Audio Switching modules. The RMM12 is designed to provide adequate ventilation for multichannel installations, ensuring the longevity of components and optimal power supply performance.

DRAKE RMM12 is a rack mount system that supports a single Drake Power Supply and up to 12 modular Audio/Video modulators, allowing for the configuration of a professional-quality headend system that optimizes rack space. It can accommodate any combination of Drake Video Modulators, Video Switching modules, and Audio Switching modules. The RMM12 is designed to provide adequate ventilation for multichannel installations, ensuring the longevity of components and optimal power supply performance.

AUDIO
VIDEO
PWR
A/V
RF
CH
#
AUDIO
VIDEO
PWR
A/V
RF
CH
#
AUDIO
VIDEO
PWR
A/V
RF
CH
#
AUDIO
VIDEO
PWR
A/V
RF
CH
#
AUDIO
VIDEO
PWR
A/V
RF
CH
#
AUDIO
VIDEO
PWR
A/V
RF
CH
#
AUDIO
VIDEO
PWR
A/V
RF
CH
#
AUDIO
VIDEO
PWR
A/V
RF
CH
#
AUDIO
VIDEO
PWR
A/V
RF
CH
#
AUDIO
VIDEO
PWR
A/V
RF
CH
#
AUDIO
VIDEO
PWR
A/V
RF
CH
#
AUDIO
VIDEO
PWR
A/V
RF
CH
#
POWER SUPPLY
®
RMM12 Rack Mount 1
The RMM12 Rack Mount supports a single Drake Power
Supply and up to (12) modular Audio/Video modulators to
configure a professional quality, modular, headend system,
which optimizes rack space. Up to (12) Drake Video
Modulators, in any combination, can be supported as well as
combinations of video modulators with Drake Video and/or
Audio Switching modules.
Identify the following items shipped with this kit of rack mount
assembly and cable assembly:
(1) RMM12 Rack Mount chassis.
(1) Wire, ground bonding chassis to power supply
(P/N: 2700017).
(1) Cable Assembly, 37-pin D connector (male) to (12) fan-out
3-Ckt connectors (female) (P/N: 2707362).
(2) End Caps, Black (P/N: 4802616).
Installation:
Adequate ventilation is very important in multichannel
installations. Rack units should be spaced apart by at least
one panel height wherever possible, and some air movement
is advisable in enclosed rack cabinets. Excessive heat will
shorten the life of components and individual module(s).
Power supply performance will also be degraded without
proper cooling.
If desired, the supplied black end caps can be installed over
the mounting ears of the RMM12 and secured by the rack
support screws.
Locate the Power Supply (sold separately). Prior to sliding the
power supply into the right-hand side top and bottom slide rails
of the RMM12, loosen the #6-32 screw located on the top
surface of the power supply. Position the free end of the
ground wire lug (other end of wire fastened to RMM12) under
the #6-32 screw, and tighten the screw to secure the ground
wire. Slide the power supply into the RMM12.
If necessary, use the following steps to remove the Drake
Power Supply from the rack:
1) Remove the module immediately adjacent to the Drake
Power Supply. Be aware that the module power cable will
become disconnected from the rear when the module is
removed.
2) Now grasp the edge of the Drake Power Supply front panel
and remove the unit from rack.
3) Reconnect the module power cable then replace the
adjacent module as required.
RMM12
BLACK END CAP
(DECORATIVE)
P/N: 4802616)
SECURE LUG (GROUND
BONDING WIRE) UNDER
#6-32 SCREW HEAD.
SLIDE RAIL (INTERNAL
TO RACK CHASSIS, TOP
AND BOTTOM).
BLACK END CAP
(DECORATIVE)
P/N: 4802616)
FIGURE 1 - Front View of Rack Mount System with
Power Supply
100-240 V
50/60 Hz
75 WATTS
~
VIDEO INPUT VIDEO INPUT VIDEO INPUT VIDEO INPUT VIDEO INPUT VIDEO INPUT VIDEO INPUT VIDEO INPUT VIDEO INPUT VIDEO INPUT VIDEO INPUT VIDEO INPUT
AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT
DC INPUT DC INPUT DC INPUT DC INPUT DC INPUT DC INPUT DC INPUT DC INPUT DC INPUT DC INPUT DC INPUT DC INPUT
RF OUT RF OUT RF OUT RF OUT RF OUT RF OUT RF OUT RF OUT RF OUT RF OUT RF OUT RF OUT
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+12 VDC
(3A Max):
Pins 2, 3, 5,
6, 8, 9,11,
13, 14, 16,
17, 19.
+5 VDC
(3A Max):
Pins 1, 4, 7,
12, 15, 18,
21, 24, 27,
30, 33, 36.
GND:
Pins 10, 20,
22, 23, 25,
26, 28, 29,
31, 32, 34,
35, 37.
37
19
20
1
100-240 V
50/60 Hz
75 WATTS
~
+12 VDC
(3A Max):
Pins 2, 3, 5,
6, 8, 9,11,
13, 14, 16,
17, 19.
+5 VDC
(3A Max):
Pins 1, 4, 7,
12, 15, 18,
21, 24, 27,
30, 33, 36.
GND:
Pins 10, 20,
22, 23, 25,
26, 28, 29,
31, 32, 34,
35, 37.
37
19
20
1
VIDEO INPUT
AUDIO INPUT
DC INPUT
RF OUT
+5V
+12V
GND
VIDEO INPUT
AUDIO INPUT
DC INPUT
RF OUT
+5V
+12V
GND
VIDEO INPUT
AUDIO INPUT
DC INPUT
RF OUT
+5V
+12V
GND
VIDEO INPUT
AUDIO INPUT
DC INPUT
RF OUT
+5V
+12V
GND
VIDEO INPUT VIDEO INPUT VIDEO INPUT VIDEO INPUT VIDEO INPUT
AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT AUDIO INPUT
DC INPUT DC INPUT DC INPUT DC INPUT DC INPUT
RF OUT RF OUT RF OUT RF OUT RF OUT
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
+5V
+12V
GND
VIDEO INPUT
AUDIO INPUT
DC INPUT
RF OUT
+5V
+12V
GND
2 RMM12 Rack Mount, continued
With the Drake Power Supply installed in the RMM12, connect
the 37-pin D connector to the mating connector at the rear of
the Drake Power Supply. Slide individual modules (maximum
of 12 units) into the desired rack locations. Connect one 3-Ckt
connector to the rear panel power input connector of each
installed module. Connect the shorter 3-Ckt cables to the
modules that are located closer to the power supply, and
AC POWER
CORD
3-PIN MALE
CONNECTOR
(TYPICAL)
AUDIO/VIDEO MODULATORS
(REAR PANEL VIEW)
DC POWER
CABLES
FIGURE 2 - Rear View of System with
12 Audio/Video Modulators.
VIDEO INPUTS (4 max. per unit)
VIDEO LOOP (VIDEO SWITCHING MODULE TO VIDEO MODULATOR)
VIDEO SWITCHING
MODULE
ADDITIONAL VIDEO
MODULATORS
AUDIO INPUTS
(4 max. per unit)
AC POWER
CORD
DC POWER CABLES
FIGURE 3 - Rear View of System with a combination of Video Switching, Audio Switching, and Audio/Video
Modulator modules.
AUDIO SWITCHING
MODULE
VIDEO
MODULATOR
37-PIN
CONNECTOR
37-PIN
CONNECTOR
longer cables to the modules located farther from the power
supply. Avoid stretching the cables or routing them where
damage to the cable is likely.
After the desired modules are installed into the RMM12 and
the RMM12 is secured in the rack, connect the power supply
to a source of AC power.
® is a registered trademark of the R. L. Drake Company
© Copyright 2001 R.L. Drake Co. P/N: 3852476E-6-2001
Printed in the U.S.A.
R.L. DRAKE COMPANY
230 INDUSTRIAL DRIVE
FRANKLIN, OHIO 45005 U.S.A.
CUSTOMER SERVICE AND PARTS TELEPHONE: +1 (937) 746-6990
TELEFAX: +1 (937) 743-4576
WORLD WIDE WEB SITE: http://www.rldrake.com
®
  • Page 1 1
  • Page 2 2

DRAKE RMM12 Quick Manual

RMM12
DRAKE
Brand
DRAKE
Model
RMM12
Type
Quick Manual

DRAKE RMM12 is a rack mount system that supports a single Drake Power Supply and up to 12 modular Audio/Video modulators, allowing for the configuration of a professional-quality headend system that optimizes rack space. It can accommodate any combination of Drake Video Modulators, Video Switching modules, and Audio Switching modules. The RMM12 is designed to provide adequate ventilation for multichannel installations, ensuring the longevity of components and optimal power supply performance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents