2. Displays2go
  3. RBQPU2CP

Displays2go RBQPU2CP, RBQP1CP, RBQP2CP, RBQPU1CP Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Displays2go Retractable Banner, models RBQPU1CP and RBQPU2CP. This document provides a step-by-step guide on how to assemble the banner system. I understand that the system is designed to be used with stanchions, and I am ready to answer your questions about the assembly process and its components, such as the scroller and stanchion toppers.
  • What parts are included?
    How do you install the stanchion topper?
    How do you connect the banner scroller?
Assembly Instructions
RETRACTABLE STANCHION RETRACTABLE STANCHION
BANNERBANNER
SKU SKU RBQPU1CP Retractable Banner - Single Custom GraphicRBQPU1CP Retractable Banner - Single Custom Graphic
SKU SKU RBQPU2CP Retractable Banner - Double-sided Custom Graphic RBQPU2CP Retractable Banner - Double-sided Custom Graphic
Scan the QR code to visit
the product page.
PARTS LIST
2. Connect both sides of scroller (B) to
stanchion toppers. Push to secure.
A. Stanchion topper (2)
3. Extend banner scroller down to the floor.
1. Locate the slot of the stanchion topper (A) and align with your stanchion’s belt. Extend the
stanchion belt out a few inches and slide topper onto the top of the stanchion. Repeat on other
stanchion.
4. Connect bottom bar to each stanchion.
Enjoy your new
retractable stanchion
banner!
If you have any questions regarding our products, please visit us at www.displays2go.com or
contact Displays2go customer service at 844-221-3388.
B. Retractable Banner Scroller (1)
/