Page is loading ...
User ManualUser Manual
SKU: CD209ANSV
Corner Silver Floor Display Case
2
PARTS LIST
PART QUANTITY
A: Screw ............................................................................................................... 4
B: Shelf Support .................................................................................................20
C: Door Hinge ...................................................................................................... 4
D: Lock with Key.................................................................................................... 1
E: Wire Support ................................................................................................... 3
F: Corner Wire Support ....................................................................................... 1
If you have any questions regarding our products, please visit us at www.displays2go.com or
contact Displays2go customer service at 844-221-3388.
Scan QR code
to visit product
page
A. B. C.
D. E. F.
Tool Needed: Screwdriver
3
Fig. A
1. Put the base on the floor and screw the
metal wires on the base (FIG. 1)
2. Assemble the showcase with the top (except
for the doors) (FIG. 2/A)
Fig. 1
Fig. 2
4
Fig. B Fig.C
Fig. D
3. Insert the metal wires into the holes on the
top and screw from the top to adjust the
metal wires (FIG. 3B-C)
4. Adjust the shelf holders to the desired height
before placing the shelves. (FIG. 4/D)
Fig. 3
Fig. 4
5
Fig.E
Fig.H
Fig.G
Fig.F
5. Put the first shelf (starting from the bottom)
and block it to avoid overturning with the
upper shelf support.
6. Attach the hinge (FIG.6/F) and the lock
(FIG.6/G) to the door. Put the bottom hinge into
the base’s hole and insert the door into the upper
hinge (FIG. 6/H) fixing it with proper screws.
Two persons are required for this final operation.
Adjust the door and then secure it.
Fig. 5
Fig. 6
6
CONTACT INFORMATION:
www.displays2go.com
PHONE: 844-221-3388
Assembly is complete.
/
