Displays2go FGICCSWH2 Operating instructions

Brand: Displays2go

Model: FGICCSWH2

Type: Operating instructions

User Manual

INDUSTRIAL INDUSTRIAL

STANCHION STANCHION

WITH DUAL WITH DUAL

RETRACTABLE RETRACTABLE

BELT BARRIERBELT BARRIER

SKU: FGICCSWH2 42” White Stanchion

Post with Two 92’ Retractable Belts

Scan QR code to visit

product page.

Safety

Lock system to ﬁx belt at

speciﬁc lengths

Foldable handle to save

space

3-wheel design for easy

transport

Reﬂective tape for night

time safety

Please read and understand all instructions before use.

• CAUTION: UNIT IS HEAVY!

• Do not let the belt retract automatically without holding one end.

• This product contains moving parts, please use with caution. Keep hands away from belt

compartment.

• Do not attempt to move unit while belt clips are still attached to anything.

• The manufacturer disclaims any liability for the modiﬁcations, improper installation, or installation

over the speciﬁed weight range. The manufacturer will not be liable for any damages arising out

of the use of the product.

Operation

Setting up

Taking Down

1. To move the unit, hold the handle and tip the unit to a

45° angle so that all 3 wheels are on the ground.

2. Once in place, ﬂip lock position to FREE.

3. Extend the belt out and loop around your desired

anchor. Secure by clipping the black carabiner to the

silver belt ring.

4. Flip lock position to LOCK.

1. Unclip belt and hold ﬁrmly. Do NOT let belt retract automatically.

2. Flip lock position to FREE then use the handle to fully retract the belt.

CAUTION: Heavy metal base can cause muscle strain or back injury!

If you have any questions regarding our products, please visit us at www.displays2go.com or

contact Displays2go customer service at 844-221-3388.

Carabiner

Ring

Displays2go FGICCSWH2 Operating instructions

Displays2go FGICCSWH2 Operating instructions

Displays2go FGICCSWH2 Operating instructions

Related papers

Other documents