2. CLS
  3. Revo Compact Inground

CLS Revo Compact Inground Owner's manual

  • Hello! I'm a chat assistant that has read the CLS REVO COMPACT INGROUND user manual, and I'm ready to answer any questions you may have about the REVO Inground light. This manual provides detailed information about the product's installation, safety precautions, technical specifications, and maintenance. Feel free to ask me anything about the product features, lens replacement, or flooding prevention methods.
  • What is the ambient temperature range for this product?
    What is the IP rating of the product?
    What is the IK rating of the product?
www.cls-led.com www.cls-led.com
h
ø
360ºFloor 19,8 cm 16,6 cm 200 cm 2,30 kg 15 kg/cm250.000 h8º12º 30º 60º 80º
12 x 46º 4 x
High Power
180 ~ 264
VAC
24 VDC Max.
10 Watt
IP67 3000K2700K AmberBlueRed Green
6500K5000K
4000K
IK10
DRIVER
INCLUDED
DRIVER
INTERNAL
2
CLS REVO COMPACT INGROUND SERIESCLS REVO COMPACT INGROUND SERIES
Manual V3.0 - December 2021
INDEX
Index 2
Safety information 2
Content 2
Technical 3
Specifications 3
CONTENT
SAFETY INFORMATION
Ambiance
Max. 40º
Block access
below the work
area when
maintaining
the unit
Disconnect the
power supply
before
installing or
maintaining
Use a source
of AC power
that complies
local electrical
codes
Don’t install in
a ammable
or explosive
area
Do not stare
into the LED
Don’t modify
or install
genuine parts
on this product
Qualied
technician
Make sure all
connectors are
connected
properly
Installation 4
Lens replacement 5
Flooding 6
Lens index 7
List of symbols 8
h
ø
360ºFloor 19,8 cm 16,6 cm 200 cm 2,30 kg 15 kg/cm250.000 h8º12º 30º 60º 80º
12 x 46º 4 x
High Power
180 ~ 264
VAC
24 VDC Max.
10 Watt
IP67 3000K2700K AmberBlueRed Green
6500K5000K
4000K
IK10
DRIVER
INCLUDED
DRIVER
INTERNAL
www.cls-led.com www.cls-led.com
3 4
ø 165 mm
205 mm
198 mm
Tools 4T15
TECHNICAL
SPECIFICATIONS
LED: 4 x High power LED
Available colours: 2700K, 3000K, 4000K, 5000K, 6500K
amber, blue, red & green
Lenses: 8º, 12º, 30º, 61º, 80º and 12x46º
Power supply: 180 ~ 264 VAC or 24 VDC
Power factor: > 0.90
Power consumption: Max. 10 Watt
Housing: Coated aluminum / plastic sleeve
Weight: 2,15 kg
IP value: IP67
IK value: IK10
Cable length: 2 meter
Measurements: 205 x 165 mm (hxø)
Ambient temperature: -20º C till +50º C
ACCESSORIES
871992 CLS mold set, straight 8-26mm
871995 CLS mold set Paguro grey
2021 CLS-LED BV. All rights reserved. Information subject to
change without notice, CLS-LED BV and all aliated companies
disclaim liability for injury, damage direct or indirect loss,
consequential or economic loss or any other loss occasioned by
the use of, inability to use or reliance on the information contained
in this manual. No part of this manual may be reproduced, in any
form or by any means, without permission in writing from CLS-LED
BV. Other legal information can be found in our General conditions,
found on the back of your CLS-LED BV invoice, inside the CLS
catalogue or on our website www.cls-led.com/General-Terms.pdf
1
4
5 6
2
3
L = Brown
N = Blue
= Yellow/green
871995 CLS mold set Paguro
19,8 cm
Note that the
cable of the
REVO Inground
also needs to
be burried into
the ground
200 cm cable
e.g. PVC pipe
Make sure
that the
REVO Inground
is xated in
the hole
Follow
Paguro manual
ø 14,6 cm
50 ~
100 cm
ø 8 cm
Use a ‘drain’
tube to buer
the water.
Explanation
in step 6
Drainage for inground xtures is very important. Doing
this in a correct way the xtures will run for a long time,
without maintenance and moisture problems.
When the plastic tube is installed, run a quick test by
pouring a bucket of water (+/-5 liters) in the opening.
Water should be gone within 1 minute.
If it lasts longer you will get too much moisture in the
xture, which leads to condensation on the glass.
If the water stands too long in the tube you need to
enhance the drainage. A good method is to create a
buer. The buer size depends on the quality of drainage.
CLS advises a tube of min. ø 80 mm with a length of
0,5 ~ 1 meter. Place this tube vertically under the xture.
The idea is to buer the water and let it slowly drain into
the soil.
INSTALLATION
www.cls-led.com www.cls-led.com
65
LENS REPLACEMENT
1
4
7
Glass
Glass
RVS ring
Front plate
Lensholder
3
2
5
8
6
unscrew
Next step on page 5
T15
10
9
Glass
RVS ring
4x
secure in
order
T15
4x
unscrew
4
4x
Secure in
order
4
4x
1
1
2
34
2
34
Glass
Front plate
Lensholder
Make sure that
the items are clean
and the rubber
sealing is correctly
in place!
Make sure that
the items are clean
and the rubber
sealing is correctly
in place!
FLOODING
1
4
7
Glass
Glass
RVS ring
Front plate
Lensholder
3
2
5
8
6
unscrew
Next step on page 5
T15
10
9
Glass
RVS ring
4x
secure in
order
T15
4x
unscrew
4
4x
Secure in
order
4
4x
1
1
2
34
2
34
Glass
Front plate
Lensholder
Make sure that
the items are clean
and the rubber
sealing is correctly
in place!
Make sure that
the items are clean
and the rubber
sealing is correctly
in place!
www.cls-led.com www.cls-led.com
7 8
LENS INDEX
1
6
2
34
Superspot 8º
Medium Flood 30º
Spot 12º
Flood 61º
Elliptical 12x46º
5
Extra Wide Flood 80º
LIST OF SYMBOLS
Multiple connection
Daisychain connectivity
Installation depth
In centimeters
Swivel
Fixture is horizontally rotatable,
indicated in degrees
Swivel
Fixture is vertically rotatable,
indicated in degrees
Installation size
In centimeters
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Protection class
One, two or three
Cable length
Maximum cable attached
to the fixture in centimeters
Lifespan
Of the light source in hours
Driver
Inclusive or exclusive
Internal or external
Pressure
Maximum pressure on the
fixture in kg/cm2
Weight
In grams/kilograms
Curve
Minimal bending curve
in centimeters
LED pitch
Pitch between the LEDs
in millimeters
Power supply
In VDC, VAC or milliAmpere
Power consumption
In VA or Watt
IP value
Ingress Protection classifies the
degrees of protection provided against
the intrusion of the product
Cutting length
Indicated by the cutting
marks
LEDs
Kind of LED used in the
fixture
Lenses
Availble lenses,
indicated in degrees
Plug & play
Easy connection using the
SmartConnect system
White colour temperature
In dierent Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Colour
Available colours;
Amber, blue, red or green
Colour changing
RGB, RGB-W, RGB-A,
AWB or Tunable White
DMX input
Fixture works on DMX512
protocol
Magno dimming
Accurate dimming from
100 - 1% by using a magnet
Dynamic Control
Dynamic Power Control or
Dynamic Temperature Control
Combined product
Compose your own fixture
Warranty
3 or 5 years warranty on
the product
Energy label
Conformité Européenne
CE marking for free marketability
of industrial goods within the EU
r
h
ø w d
Dimmable
1-10 Volt, Phase, individual,
DMX dimmable or DALI
DRIVER
INCLUDED
DRIVER
EXTERNAL
Retail & Food LED modules
Clothing, furniture, kitchens, jewellery,
shoes, bread, meat,
fish & vegetables & fruit.
Lightsource
Equipped with a CLS, Citizen or a Xicato
LED module
Bluetooth controlled
By Casambi
CLS
DYNAMIC
COLOUR
COB
/