i3 International MO-1 Quick start guide
- Category
- Security camera accessories
- Type
- Quick start guide
Thank you for purchasing i3’s Mo-1 omnidirectional outdoor microphone.
i3’s Mo-1 outdoor omnidirectional microphone features an attractive and
durable IP66-rated metal housing that is dust- and waterproof.
With a 5 meter (16 ft) sound pickup radius and built-in Ambient Noise
Cancellation, Mo-1 microphone delivers exceptional quality sound.
When used together with i3’s Annexxus 65RM/75RM camera, Mo-1 microphone
can be used for two-way audio communication between the camera site and
Server or Client site.
This microphone can be discreetly wall- or ceiling-mounted indoors or outdoors,
up to 300m (1000ft) away from the Annexxus camera, for a wide range of
applications, including schools, gas stations, transit, and retail.
See the reverse side of this guide for the Annexxus 65RM (Audio)/75RM
connection diagram.
POWER SUPPLY
This device requires the use of a DC12V power supply (not included). Incorrect
voltage may cause irreparable damage to the microphone and will effectively
void the warranty.
WIRING REQUIREMENTS
To extend an Audio cable run, use a 2-conductor shielded cable,
22 AWG minimum with a 24 gauge ground (GND) drain wire.
Unshielded cable must not be used for audio systems.
PACKAGE CONTENTS
Ensure that the items received match those listed on the order form and the
packing slip. In addition to this guide, the packing box includes:
1. Mo-1 IP66 outdoor microphone with 2m (6ft) 3-wire cable
2. Mounting guide pattern sticker x1
3. Plastic anchor x3
4. Round head screw (tapping type) x3
Quick Guide
Omnidirectional IP66 Outdoor Microphone
Mo-1
i3-TRNG-CAMS-Mo-1-QuickGuide.inddRev. 170817
i3 INTERNATIONAL INC. 1.866.840.0004
www.i3international.com
Canada 780 Birchmount Road, Unit 16,
Scarborough, ON, M1K 5H4
U.S.A 4450 Witmer Industrial Estates Unit 4
Niagara Falls, NY 14305
QQƨMR
QQƨMR
20mm
ɸMR
Features/Model Mo-1 IP66 Outdoor Microphone
Electrical
Sound pickup distance 5m (16 ft) radius
Transmission distance 300 m (1000 ft)
Sensitivity -32 dBV/Pa
Directionality Omnidirectional
Signal-to-Noise Ratio
(SNR)
75 dB (1M 40dB SPL sound source)
30 dB (10M 40dB SPL sound source)
1 KHz at 1 Pa
Frequency response 100 Hz ~ 16 KHz
Audio output Line Level (0 dBV, 600: @1KHz)
Power consumption 12V DC, 60 mA
Ambient noise
cancellation
Auto
Environmental Conditions
Operational temperature
-40ºC to 60ºC (-40ºF to 140ºF)
Environmental noise 120 dB SPL maximum
Mechanical
Dimensions ĭ80mm x 20mm (ƨƉ\Ɖ
Weight 185 g (6.5 oz)
Housing Metal alloy
Waterproof rating IP66
'IVXMƼGEXMSRW FCC/CE
Warranty
Limited Warranty 5 years parts and labour
DIMENSIONS
COMPATIBLE WITH
• Annexxus 63C
• Annexxus 65RM (Audio)
• Annexxus 75RM
• SRX-Pro Server/Service v.6.0.X
• Video Pilot Client v.6.0.X
IMPORTANT
NOTICE
When using this
equipment as part of
an audio monitoring
system, follow all
local and federal laws,
including but not limited
to providing visible notice
of audio monitoring
on
premises.
Example of a recommended
2-conductor shielded cable.
CANADA 780 Birchmount Road,
Unit 16, Toronto,
ON, M1K 5H4
U.S.A 4450 Witmer Industrial Estates
Unit 4 Niagara Falls,
NY 14305
www.i3international.com
1.866.840.0004
Mo-1 Omnidirectional IP66 Outdoor Microphone.
Connection Diagram to Annexxus 65RM (Audio)/75RM.
Rev. 170817
Thank you for purchasing i3 Mo-1 Omnidirectional Microphone. Mo-1 Microphone requires 12V DC power, not included.
Follow the connection diagram below to connect Mo-1 to an i3’s Annexxus 65RM (Audio)/75RM camera.
i3 INTERNATIONAL INC.
1.866.840.0004
www.i3international.com
Canada 780 Birchmount Road, Unit 16,
Scarborough, ON, M1K 5H4
U.S.A 4450 Witmer Industrial Estates Unit 4
Niagara Falls, NY 14305
Au/I
GND
Au/O
GND AO AI
GNDCOM
Annexxus 65RM
(Audio)/75RM,
Back box removed.
I/O connection terminal.
Mo-1, Omnidirectional
Microphone
12VDC
12V DC Power Supply,
not included
Red
Mo-1 Power
+
Power
GND
White
Mo-1 Audio In
Black
Mo-1 GND
To extend Power and GND cable
runs, use a 2-wire 22 AWG (minimum)
conductor.
To extend the Audio cable run,
use a 2-conductor shielded cable,
22 gauge (minimum) with a 24 gauge
ground (GND) drain wire.
Mo-1 cable Connect to
White wire
Audio Input on the camera
connection terminal
Black wire
Audio Ground on the camera
connection terminal
Red wire +12 VDC Power
12 VDC cable Connect to
GND wire
Audio Ground on the camera
connection terminal
WIRING REQUIREMENTS:
2-conductor shielded cable, 22 AWG minimum
with a 24 gauge ground (GND) drain wire.
Unshielded cable is not suitable for audio
systems and must not be used.
Mo-1 microphone cable
White wire.
Connect to the Au/I (Audio Input) terminal on the camera.
Black wire.
Connect to the GND (Audio Ground) terminal on the camera.
Red wire.
Connect to the +12V DC on the power source (not included).
-
1
-
2
i3 International MO-1 Quick start guide
- Category
- Security camera accessories
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
i3 International Ax68 78R User guide
-
-
-
-
-
-
-
-
i3 International Ax73RM Quick start guide
-
