ViewCast 4100 User manual

Type
User manual

This manual is also suitable for

Document Number: 40-03288-01-A
Date: December 2010
© 2010 ViewCast Corporation. All rights reserved.
ViewCast, GoStream, ViewCast logo, SimulStream, Niagara, SchedulStream, Niagara logo, Osprey,
and Niagara SCX are trademarks or registered trademarks of ViewCast Corporation or its
subsidiaries.
Microsoft, Windows XP, Windows, and Windows Media are trademarks or registered trademarks of
Microsoft Corporation.
QuickTime, iPhone, and iPod, are trademarks or registered trademarks of Apple Inc.
Adobe and Flash are trademarks or registered trademarks of Adobe Systems Inc.
Disclaimer
The information in this publication remains the property of ViewCast Corporation. Users may not use, reproduce, or disclose this information
without the implied consent and written approval of the company.
ViewCast Corporation makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any
express or implied warranties of merchantability or fitness for any particular purpose. Further, ViewCast Corporation reserves the right to
revise this publication to make enhancements in the products described in this manual, at any time, without obligation to notify any person or
entity of such revisions or changes. In no event will ViewCast Corporation be liable for direct, indirect, special, incidental, or consequential
damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
ViewCast Corporation is not responsible for any third-party license fees that may occur with the use of our products by an end user including
but not limited to creating or distributing content. The user is responsible for any fees the Multimedia Patent Trust may apply for creating and
distributing MPEG content.
Warranties
For complete warranty details, refer to the specific warranty included with each product. General warranty information includes the following:
Limited Warranty: ViewCast warrants its hardware products against defects in material and workmanship under normal use for the period of
one year (12 months) from date of sale. Where specific warranties exist that provide more substantial coverage, notwithstanding the warranty
provisions herein, such product warranties control and preempt or supersede the warranty provisions herein.
Reseller Pass Through of Standard Limited Warranties: Resellers pass the ViewCast standard limited warranties for the products through to
the customer without modification. Any modification of a product voids the ViewCast warranties or any other existing or available warranty.
Corporate Contact Information
ViewCast collaborates and partners with various clients to integrate products into their individual environments.
Niagara Technical Support: Phone: 972.488.7157, Fax: 972.488.7111 or submit the technical support online request from the ViewCast
website.
ViewCast USA Support: Monday through Friday: 9 a.m. 5 p.m. Central Time. Typical response time is within one business day for customers
without a Priority Support Agreement.
ViewCast Corporation 3701 West Plano Parkway, Suite 300, Plano, TX 75075-7840 USA
Toll Free (U.S. only): 800.540.4119 website: www.viewcast.com
Niagara 4100 User Guide
ViewCast iii
Contents
About This Guide ............................................................................................................ 1
Product description............................................................................................................. 1
Audience ............................................................................................................................. 1
Conventions for this guide .................................................................................................. 2
Rack mount safety instructions .......................................................................................... 3
FCC notice ........................................................................................................................... 4
Environmental notices ........................................................................................................ 5
Warnings ............................................................................................................................. 6
Overview .......................................................................................................................... 9
Media appliance functions .................................................................................................. 9
Install overview ................................................................................................................. 10
Prerequisites ..................................................................................................................... 10
Package contents ....................................................................................................... 10
System requirements ........................................................................................................ 11
Specifications .................................................................................................................... 11
Installing additional software ........................................................................................... 11
Connecting to the Internet ............................................................................................... 12
Niagara 4100 front panel diagram .................................................................................... 13
Niagara 4100 back panel diagram .................................................................................... 14
Connecting the Niagara 4100 ........................................................................................... 15
Niagara 4100 EASE menu .................................................................................................. 16
Niagara 4100 home page .................................................................................................. 17
Menu bar commands ................................................................................................. 17
Niagara 4100 browser windows flow ............................................................................... 19
Easy Setup ..................................................................................................................... 21
Web interface ................................................................................................................... 22
Easy first time set up ......................................................................................................... 23
Connecting to an electrical power source .................................................................. 23
Performing the initial start up .................................................................................... 24
Connecting to an IP network ...................................................................................... 25
Changing the network settings................................................................................... 25
Contents
iv ViewCast
Basic Operations ........................................................................................................... 29
Starting up ......................................................................................................................... 29
Shutting down ................................................................................................................... 30
Starting an encoder........................................................................................................... 31
Checking CPU usage .......................................................................................................... 33
Stopping an encoder ......................................................................................................... 34
Connecting an external storage device ............................................................................ 35
Exporting captured video files .......................................................................................... 35
Advanced Operations ................................................................................................... 37
Logging in .......................................................................................................................... 37
Viewing all encoders ......................................................................................................... 39
Creating an encoder .......................................................................................................... 40
Starting an encoder........................................................................................................... 41
Stopping an encoder ......................................................................................................... 42
Editing an Adaptive Apple HTTP encoder ......................................................................... 43
Video tab .................................................................................................................... 44
Audio tab .................................................................................................................... 46
Apple HTTP Live Streaming Output tab ...................................................................... 47
Apple HTTP Live Streaming Security tab via FTP ........................................................ 49
Editing an Adaptive Adobe Flash encoder ........................................................................ 50
Video tab .................................................................................................................... 51
Audio tab .................................................................................................................... 54
Adobe Flash Dynamic Streaming Output tab ............................................................. 55
Adobe Flash Dynamic Streaming Security tab ........................................................... 57
Editing an Adobe Flash H.264 encoder ............................................................................. 58
Video tab .................................................................................................................... 59
Audio tab .................................................................................................................... 62
Output tab .................................................................................................................. 63
H.264 Presets tab ....................................................................................................... 65
Editing an MPEG-4 encoder .............................................................................................. 66
Video tab .................................................................................................................... 67
Audio tab .................................................................................................................... 71
Output tab .................................................................................................................. 73
H.264 Presets tab ....................................................................................................... 75
Editing a Windows Media encoder ................................................................................... 76
Video tab .................................................................................................................... 77
Audio tab .................................................................................................................... 79
Output tab .................................................................................................................. 80
DRM tab ...................................................................................................................... 83
Niagara 4100 User Guide
ViewCast v
Viewing encoder groups ................................................................................................... 84
Creating encoder groups .................................................................................................. 85
Starting an encoder group ................................................................................................ 86
Stopping an encoder group .............................................................................................. 86
Editing encoder groups ..................................................................................................... 87
Configuring the Preset ABC buttons ................................................................................. 88
Using Preset ABC buttons to start an encoder group ....................................................... 90
Viewing all encoders ......................................................................................................... 91
Editing preset encoders .................................................................................................... 91
Configuring machine properties ....................................................................................... 92
Changing the computer name .................................................................................... 93
Changing the login password from the factory default ............................................. 94
Restoring the login password to the factory default ................................................. 94
Configuring Alerts ............................................................................................................. 95
Configuring network properties ....................................................................................... 96
Configuring network cards ......................................................................................... 96
Configuring the IP address ......................................................................................... 97
Configuring advanced network settings ..................................................................... 97
System configuration settings .......................................................................................... 99
Setting current system configuration ....................................................................... 100
Configuring email/SMTP settings ............................................................................. 101
Configuring idle screen information ......................................................................... 102
Configuring default directory setting ....................................................................... 103
Setting CPU thresholds ............................................................................................. 104
Restoring Niagara 4100 factory defaults .................................................................. 104
Viewing the activity log ................................................................................................... 106
Viewing alerts ................................................................................................................. 107
Connecting an external storage device .......................................................................... 108
Using the Niagara SCX web interface ............................................................................. 108
Appendix A: DRM for Windows Media ...................................................................... 109
Importing a DRM profile ................................................................................................. 110
Appendix B: H.264 Advanced Settings ..................................................................... 115
CBR Newscast ............................................................................................................... 117
CBR Sports .................................................................................................................... 118
CBR Action .................................................................................................................... 119
Mobile ............................................................................................................................. 120
VBR Newscast............................................................................................................... 121
VBR Sports .................................................................................................................... 122
Contents
vi ViewCast
VBR Action.................................................................................................................... 123
Settings ........................................................................................................................... 124
Other settings ................................................................................................................. 127
Appendix C: Mapped Network Drive Setup .............................................................. 129
Appendix D: EASE Menu ............................................................................................ 139
Encoder menu ................................................................................................................. 140
Encoder start ............................................................................................................ 140
Encoder stop ............................................................................................................. 140
Encoder status .......................................................................................................... 140
Access Health menu ........................................................................................................ 141
CPU status ................................................................................................................ 141
Memory available ..................................................................................................... 141
Setup system menu ........................................................................................................ 142
Network link status .................................................................................................. 142
Network MAC address .............................................................................................. 142
View network settings .............................................................................................. 143
Enable DHCP ............................................................................................................. 143
Set static IP addresses .............................................................................................. 144
Set gateway address ................................................................................................. 145
Set date and time ..................................................................................................... 146
Set video standard .................................................................................................... 146
Factory restore ......................................................................................................... 147
Export files menu ............................................................................................................ 148
Export to USB drive .................................................................................................. 148
Shutdown Niagara 4100 ........................................................................................... 148
Index ............................................................................................................................. 149
Niagara 4100 User Guide
ViewCast 1
About This Guide
Thank you for purchasing the ViewCast Niagara 4100 streaming media appliance. This user guide
provides step-by-step instructions for installing and using your new streaming media appliance. For the
latest ViewCast product information and news, visit our website at www.viewcast.com.
Product description
The Niagara 4100 is designed with a combination of simplicity, portability and power to quickly and
easily stream your high-definition (HD) content to broadband and mobile networks including live
Adapative streaming to Adobe® Flash Media Server and Apple® (iPhones® and iPads®), Adobe Flash®
H.264, MPEG-4, H.263, H.264, and Windows Media (Silverlight® compatible) SD and HD, as well as
container support for 3GPP and 3GPP2. With the ability to ingest HD video, the Niagara 4100 is ideal for
live sports, live newsgathering, webcasting or any streaming application where you need rock-solid HD
performance on the go.
This rugged, portable streaming appliance can ingest standard- or high-definition video sources through
its SDI input, and accommodates a variety of audio input formats, including embedded SDI, AES/EBU,
and balanced or unbalanced stereo.
Figure 1. ViewCast Niagara 4100
Audience
The audience for this publication includes anyone who uses or administers the Niagara 4100. They
should have a basic technical understanding of streaming media. This user guide provides information
on the Niagara 4100 only.
About This Guide
2 ViewCast
Conventions for this guide
This guide uses the document conventions specified below to help you identify different types of
information.
Convention
Description
Example
Bold text
Characters to enter when
referenced in a procedure. The
name of fields or keys to press.
Enter DTMF as the group type.
Press Enter to save all your
changes.
Note:
Provides supplemental
information.
Note: The prompt may not
display if …
IMPORTANT!
Provides important data that
affects how the system or
software responds.
IMPORTANT! You must install
Niagara SCX prior to
configuring SCX options…
WARNING!
Provides information to ensure
you avoid potential injury,
death, or permanent system
damage.
WARNING! Do not touch
exposed wires.
CAUTION!
Provides information to help
avoid possible damage to
hardware or a system crash
(without data loss).
CAUTION! Use case sensitive
commands to keep from
destroying…
Niagara 4100 User Guide
ViewCast 3
Rack mount safety instructions
Operating Temperature
The operating ambient temperature of a rack environment may
be greater than room ambient if installed in a closed or multi-unit
rack assembly. Therefore, you should install the equipment in an
environment compatible with the maximum ambient
temperature of 40° C.
Reduced Air Flow
You must not compromise the airflow required for safe
equipment operation when you install the equipment in a rack.
Mechanical Loading
Mounting of the equipment in the rack should be such that you
do not cause a hazard due to uneven mechanical loading.
Circuit Overloading
Consider the connection of the equipment to the supply circuit
and the effect that the overloading of the circuits might have on
current protection and supply wiring. You must also consider and
use the equipment nameplate ratings when you address this
concern.
Reliable Earthing
You must maintain reliable earthing of rack-mounted equipment.
Pay particular attention to supply connections other than direct
connections to the branch circuit (such as using power strips).
About This Guide
4 ViewCast
FCC notice
WARNING! You must connect this device and peripherals using shielded cables to comply with FCC
radio emission limits.
WARNING! Modifications to this device not approved by ViewCast Corporation could void the FCC-
granted authority for you to operate the device.
WARNING! The Niagara 4100 complies with the limits for a Class A digital device pursuant to Part 15
of the FCC Rules. These limits provide reasonable protection against harmful interference when you
operate the equipment in a commercial environment. This equipment generates, uses, and may
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area will likely cause harmful interference. In this case you must correct the interference
at your own expense.
To CATV Installer: Pay special attention to Section 820-40 of the NEC that provides guidelines for
proper grounding. It particularly specifies that you must connect the cable ground to the grounding
system of the building as close to the point of cable entry as practical.
WARNING! Equipment installation must comply with local and national electrical codes.
Niagara 4100 User Guide
ViewCast 5
Environmental notices
Product Disposal
Information:
Dispose of this product in accordance with local and
national disposal regulations (if any) including those
regulations governing the recovery and recycling of Waste
Electrical and Electronic Equipment (WEEE).
RoHS Compliant:
ViewCast Corporation commits to compliance with the
European directive on the Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic
Equipment, Directive 2002/95/EC, the RoHS directive.
This product supplied to the European Union does comply
with the RoHS directive. ViewCast certifies that this
equipment shipped to the European Union conforms to the
2002/95/EC directive.
For current RoHS statement, see www.viewcast.com.
Underwriters Laboratories
Inc. Statement
Underwriters Laboratories Inc. has not tested the
performance or reliability of the security or signaling
aspects of this product. UL only tested for fire, shock, and
casualty hazards as outlined in UL’s Standard for Safety UL
60950-1. UL Certification does not cover the performance
or reliability of the security or signaling aspects of this
product.
UL does not represent, warranty, or certify the
performance of reliability of any security or signaling
related functions of this product.
About This Guide
6 ViewCast
Warnings
Only trained and qualified personnel should install, replace, or service this equipment.
Do not attempt to open the case of the appliance. If you do, you incur a high risk of electrical shock that
may cause damage to the appliance or personal physical injury or death to you and/or others. No user-
serviceable parts exist inside the appliance. If you open the appliance case or make unauthorized
changes to the case, ViewCast voids your warranty.
Install the appliance away from any heat sources. This remains vital to the safety of the product users.
Do not install the appliance near any heat sources such as:
Radiators
Heat registers
Stoves
Other heat-producing equipment
WARNING! Installing the appliance near heat sources could result in personal injury or death.
Never insert objects of any kind into the appliance through any appliance openings, as the objects
may touch dangerous voltage points, short out parts, and result in a risk of fire or electrical shock.
Do not stack the appliance atop or below other electronic devices as this can cause heat build-up and
vibration of the appliance. These conditions can damage the appliance thereby voiding the limited
warranty.
You may stack multiple Niagara 4100 units as these appliances accommodate stacking.
Do not install the appliance in any area where the temperature is less than 5°C or more than 40°C.
Transfer from temperature extremes may cause condensation. Let the appliance remain unplugged at
room temperature for at least 45 minutes before connecting it.
Use an outlet with surge suppression or ground fault protection when using the appliance. Unplug the
power cord from the wall outlet and disconnect the lines between the appliance and the video source
for added protection:
During a lightning storm
During dangerous weather conditions
When the encoder remains unattended or unused for long periods
Reduce the risk of fire or electric shock. Do not expose the appliance to any rain or moisture. Exposing
the appliance to rain or other types of moisture could result in appliance damages. Do not place any
liquids on or near the appliance. If you place liquids in any form on or near the appliance, do so at your
own risk, for you incur a high risk of electrical shock that could occur and cause damage to the
appliance.
WARNING! Exposing the appliance to rain or other types of moisture could result in physical injury or
death. Any liquids on or near the appliance may result in electrical shock and personal injury or
death.
Niagara 4100 User Guide
ViewCast 7
Refer all servicing to authorized service personnel. You must have authorized personnel only service any
damaged appliance. Relevant damage may occur with but is not limited to the following:
An unplugged or damaged power supply cord
Spilled liquid on the appliance
Fallen objects in or on the appliance
Appliance exposure to rain or other moisture or liquid
Failure to perform as described in the User Guide
A dropped appliance
ViewCast assumes no liability or responsibility for any damaged appliance that clients continue using.
Use only attachments, accessories, or equipment specified by the manufacturer with the appliance.
Using accessories or attachments not recommended by the encoder manufacturer voids the Limited
Warranty.
WARNING! When using 4-pin XLR to cigarette car plug cables, do not disconnect the car battery
adaptor or turn off the car engine before you turn off the player. Doing so may damage the player.
Do not attempt to service the appliance yourself. If you open or remove covers, you may be exposed to
dangerous voltage. Such action voids the Limited Warranty. Refer all servicing issues to authorized
service personnel only.
The plug-socket combination that serves as the main disconnecting device must be accessible at all
times.
Protect the power cord from anyone walking on it and being strained or pinched particularly at plugs,
electrical receptacles, and the point where the power cord exits the appliance.
Do not use adapter plugs or remove the grounding prong from the power cable.
Use only the type of power source indicated on the marking label on the back panel of the unit to
operate the appliance. Unplug the appliance power cord by gripping the plug and removing it from the
power source. Do not pull the cord to remove the power source from the appliance.
Do not plug the appliance into a wall outlet that contains an overload of electrical cords or power
strips/extension cords. This type of overload may result in fire or electrical shock risks.
Always handle the appliance carefully. Always avoid excessive shock and vibration to the appliance.
Excessive shock or vibration can damage the appliance.
WARNING! Excessive shock or vibration to the appliance may result in electrical shock and personal
injury or death.
Niagara 4100 User Guide
ViewCast 9
Overview
Before you can use your Niagara 4100 streaming media appliance, you first need to set up and configure
it. This chapter is dedicated to providing you with the details and step-by-step instructions you need to
make your installation as quick and easy as possible.
All you need to get started are the four following requirements:
AC power source (100 - 240 V)
Your audio and video source (such as a camera, video player, or other A/V output device)
A streaming media server or hosting provider
IP connection and/or Internet connection
The Niagara 4100, an easy-to-use streaming device, allows you to:
Connect to a compatible browser on a dynamic host configuration protocol/domain name server
(DHCP/DNS) network.
Configure and connect your audio and video source to the Niagara 4100.
Select your output formats and streaming settings.
Enter your streaming server information.
Start streaming your media.
You can configure and use the Niagara 4100 straight from the box for any streaming activities. Use the
web interface for setting options and controlling your Niagara 4100 from another networked computer,
as well as more advanced options.
WARNING! Read the installation instructions before connecting the system to the power source.
Media appliance functions
Although it has many features and capabilities, the Niagara 4100 streaming media appliance performs,
in its most basic functions, as follows:
Takes analog audio and SDI video inputs
Captures the signals
Encodes the signals into digital IP video formats
Delivers the IP audio and video content to a storage device or streams it over an IP network
Overview
10 ViewCast
Install overview
This section addresses the high-level actions you must perform to physically connect and set up your
Niagara 4100 system.
You must complete the following primary tasks to install the Niagara 4100:
Address and comply with all prerequisites.
Connect the Niagara 4100 streaming media appliance using its power source.
Connect the video source (camera or video recorder) to the system.
Connect the Niagara 4100 to an IP network.
Configure the Niagara 4100 system.
Prerequisites
Before installing and connecting the Niagara 4100, ensure you comply with the following prerequisites:
All packaged items are undamaged and in working order.
Your environment meets all system requirements.
Safety instructions, notices, and warnings detailed in About This Guide including:
o Rack Mount Safety Instructions
o FCC Notice
o Environmental Notices
o Warnings
Package contents
Completely unpack all contents from the box and inspect each item for damage. Ensure that you have all
the components listed below:
Appliance
Power Cables
Guides
Software
Hardware
Niagara 4100 User Guide
ViewCast 11
If any components are missing or damaged, do not continue with the installation. Contact the ViewCast
reseller from which you purchased your Niagara 4100 streaming media appliance for assistance in
obtaining any missing parts or for parts replacement.
System requirements
Ensure your computer meets the following system requirements.
Browser Interface
Any Internet Explorer (IE)-based computer, workstation, or laptop that
interfaces to a dynamic host configuration protocol/domain name
server (DHCP/DNS)-compatible network
User Interface
High-speed Internet, dial-up, and mobile device users
Specifications
Intel i7 processor
4 GB RAM or larger
HDD (160 GB or larger)
Osprey 710e HD technology
4.5 H x 8” W x 12” D)
8 lbs (3.6 kg)
90 W power supply
Installing additional software
The Niagara appliances run an embedded version of the Microsoft Windows 7 operating system (OS),
which is a sub-set of the normal retail version. The Microsoft License agreement limits the use of the
system to what the machine is designed to do.
The Microsoft Update process is turned off by default to prevent interruptions during live streaming
events. It is also not advised to use a Windows 7 installation CD to add features to the system or the
appliance may fail.
You may load additional software on the appliance; however, ViewCast does not support this additional
software. You also need to ensure the primary drive is not full or the appliance will fail. In the event of a
problem, you may need to perform a Factory Restore, which returns the appliance to the original
software load. You may save the current encoder profiles and reload them when the Factory Restore is
complete.
You can perform a Factory Restore at any time. This process returns the appliance to the software load
that came with the appliance. Perform a Factory Restore if the appliance becomes unstable due to
installed applications, viruses, etc. Please refer to the user guide for instructions.
ViewCast Support can provide assistance should the appliance fail to start. In most cases, you can
restore an appliance to operation without returning it to ViewCast. There is a fee in the event a user
returns an appliance due to applications the user installed or if the appliance failed because the primary
partition (drive C) is full.
Overview
12 ViewCast
Connecting to the Internet
The Internet is a dangerous place. Never connect a Niagara appliance directly to the Internet. Always
use a router. A basic router is sufficient to protect the appliance and you can configure the router as
needed to forward specific ports to the appliance. The router’s bandwidth should match or exceed the
speed of the appliance’s network card.
The Shields Up test by Gibson Research (http://www.grc.com/intro.htm) is a good utility to verify you do
not expose the Niagara appliance to the Internet. Select to test All service ports. The utility queries the
appliance’s outside IP address for all service ports less than 1056. All of these ports should report as
Stealth and the analysis should show the tests have passed. Ports the router has forwarded show as
open. This is OK and you should consider the test as passed.
Niagara 4100 User Guide
ViewCast 13
Niagara 4100 front panel diagram
You should familiarize yourself with the front panel controls for the Niagara 4100 (Figure 2). Besides the
basic buttons for power, start/stop, up/down and menu access, there are indicator lights that are
hidden until illuminated.
Figure 2. Niagara 4100 front panel
A
Press this button once to power up the appliance. When the appliance is powered up,
press this button once will power it down.
B
Allows exporting files to USB devices and installing updates or firmware.
C
Indicates audio input presence.
D
Allows headphones to be connected to the appliance for audio monitoring.
E
Controls the audio level on the headphones.
F
Press this button to stop an encoder when it is highlighted on the LCD display.
G
Press this button to start the encoder highlighted on the LCD display.
H
These buttons are used for EASE menu navigation on the LCD display.
I
Press this button to enter or accept the menu choice highlighted on the LCD display.
This button is used for EASE menu operations.
J
Press this button to activate the EASE menu on the LCD display.
K
When the Alarm Light indicator is lit, press this button to view a log of the most recent
alarms recorded.
Press Enter to clear these alarms from the log.
L
Displays menus and system messages.
M
This light indicates when the appliance detects that a video source is connected to one of
its video inputs.
Note: This light only illuminates when you start an encoder.
N
Indicates that another user is accessing the appliance across the network from a
computer.
O
Indicates that an application alert has occurred.
P
When an encoder profile is assigned to one of these buttons, press the assigned button
and then Stream to start the encoder.
Press the assigned button and then Stop to stop the encoder.
Overview
14 ViewCast
Niagara 4100 back panel diagram
Refer to Figure 3 for all the connectors and other components of the Niagara 4100 back panel.
Figure 3. Niagara 4100 back panel
A
Left/right XLR connector for balanced audio sources. XLR connectors are used by
professional audio engineers and are found on high-end audio and video playback
equipment.
Note: A microphone preamplifier or mixer with XLR preamp functions is required to
connect an XLR microphone to the balanced audio input.
B
Receives high-definition SDI video to the unit. This SDI input allows professional-grade video
connections.
C
Transmits high-definition SDI video from the unit.
D
Digital AES audio 1.
E
Digital AES audio 2.
F
Left/right RCA connectors for unbalanced audio sources.
G
Provides system power.
H
Connects USB control devices, such as a memory card (USB memory device, keyboard, and
mouse).
I
Use this auxiliary VGA output port to connect an external VGA monitor so you can view the
operating system interface.
J
Dual Ethernet ports provide redundant connections to your network to connect a video test
signal, such as a color bar generator, to calibrate the video settings for video capture
settings.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160

ViewCast 4100 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI