(SURFACE VERTICAL ROD SHOWN)
4500 HEAD
CHASSIS
SHIM
DOOR
EDGE
4500 EXIT DEVICE
HEAD CHASSIS
INSTALLATION INSTRUCTIONS:
METAL: 1/4"-20 X 1" BUTTON HEAD MACHINE SCREW.
A.
WOOD: #12 X 1-1/2" BUTTON HEAD WOOD SCREW.
B. METAL: 1/4"-20 X 1" FLAT HEAD MACHINE SCREW.
WOOD: #12 X 1-1/2" FLAT HEAD WOOD SCREW.
C. METAL: #10-24 X 1" BUTTON HEAD MACHINE SCREW.
WOOD: #10 X 1-1/4" BUTTON HEAD WOOD SCREW.
1 7/32"
*
30.9
1 5/32"
29.4
1 7/32"
*
30.9
1 5/32"
29.4
A
A
B
B
C
C
FOLLOW EXIT DEVICE INSTALLATION
1.
INSTRUCTIONS TO PREPARE DOOR AND DEVICE
FOR MOUNTING.
INSERT SHIMS BETWEEN THE EXIT DEVICE AND
2.
THE DOOR.
SHIMS ARE NON-HANDED AND CAN BE
1.
USED FOR RH OR LH APPLICATIONS.
SURFACE VERTICAL ROD LATCH SHIMS
2.
HAVE ONE END THAT IS LONGER,
ORIENTATION IS CRITICAL FOR PROPER
INSTALLATION (SEE ILLUSTRATION).
RIM EXIT DEVICE (NOT SHOWN) WILL NOT
3.
REQUIRE ROD GUIDE OR LATCH SHIMS.
SECURE EXIT DEVICE WITH PROVIDED SCREWS,
3.
SEE FASTENER LIST BELOW FOR PROPER
FASTENER LOCATION.
FIGURE 1
EXIT DEVICE
SHIM
END CAP SHIM
LATCH SHIM
ROD GUIDE SHIM
* ORIENT THE LATCH SHIMS SO THE LONGER
END IS NEAR THE LATCH BOLT.
FASNTENER LIST (SEE FIGURE 1):
4930 GLASS BEAD SHIM INSTALLATION INSTRUCTIONS
FOR USE WITH 4500 SERIES EXIT DEVICES
REV: 03
DRAWING NO: I-ED00140
SHEET 1 OF 1
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 - (800) 325-9995 - Fax (800) 782-0149
/
