Hagerco 4930S - Shim Kits Installation guide

Hagerco
Brand
Hagerco
Model
4930S - Shim Kits
Type
Installation guide
4930 GLASS BEAD SHIMS FOR 4500 EXIT DEVICE
INSTALLATION INSTRUCTIONS
(SURFACE VERTICAL ROD SHOWN)
4500 HEAD
CHASSIS
SHIM
DOOR
EDGE
4500 EXIT DEVICE
HEAD CHASSIS
INSTALLATION INSTRUCTIONS
METAL: 1/4"-20 X 1" BUTTON HEAD MACHINE SCREW.
A.
WOOD: #12 X 1-1/2" BUTTON HEAD WOOD SCREW.
B. METAL: 1/4"-20 X 1" FLAT HEAD MACHINE SCREW.
WOOD: #12 X 1-1/2" FLAT HEAD WOOD SCREW.
C. METAL: #10-24 X 1" BUTTON HEAD MACHINE SCREW.
WOOD: #10 X 1-1/4" BUTTON HEAD WOOD SCREW.
REV:
03
1 7/32"
*
30.9
1 5/32"
29.4
1 7/32"
*
30.9
1 5/32"
29.4
AA
B
B
C
C
FOLLOW EXIT DEVICE INSTALLATION
1.
INSTRUCTIONS TO PREPARE DOOR AND DEVICE
FOR MOUNTING.
INSERT SHIMS BETWEEN THE EXIT DEVICE AND
2.
THE DOOR.
SHIMS ARE NON-HANDED AND CAN BE
1.
USED FOR RH OR LH APPLICATIONS.
SURFACE VERTICAL ROD LATCH SHIMS
2.
HAVE ONE END THAT IS LONGER,
ORIENTATION IS CRITICAL FOR PROPER
INSTALLATION (SEE ILLUSTRATION).
RIM EXIT DEVICE (NOT SHOWN) WILL NOT
3.
REQUIRE ROD GUIDE OR LATCH SHIMS.
SECURE EXIT DEVICE WITH PROVIDED SCREWS,
3.
SEE FASTENER LIST BELOW FOR PROPER
FASTENER LOCATION.
FIGURE 1
EXIT DEVICE
SHIM
END CAP SHIM
LATCH SHIM
ROD GUIDE SHIM
* ORIENT THE LATCH SHIMS SO THE LONGER
END IS NEAR THE LATCH BOLT.
FASNTENER LIST
SEE FIGURE 1 FOR SCREW LOCATIONS
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 - (800) 325-9995 - Fax (800) 782-0149
  • Page 1 1

Hagerco 4930S - Shim Kits Installation guide

Hagerco
Brand
Hagerco
Model
4930S - Shim Kits
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents