SC200508
ASSEMBLY INSTRUCTIONS
UltraHD® Tall Storage Cabinet (Model No. 16234)
36 in. W x 18 in. x 72 in. H
(91.4 cm x 45.7 cm x 1.83 m)
Reference page 10 for special care and
maintenance of stainless steel
1
(#1) LEFT PANEL x 1 PC
(#2) RIGHT PANEL x 1 PC
(#5) MIDDLE SHELF x 3 PCS
(#6) LEFT DOOR x 1 PC
(#7) RIGHT DOOR x 1 PC
(#8) UPPER BACK PANEL x 1 PC
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department. (Please refer to page 11)
(#3) TOP PANEL x 1 PC
(#4) BOTTOM PANEL x 1 PC
2
(#13) WHEEL W/O BRAKE x 2 PCS
(#15) CORNER PROTECTION x 2 PCS
(#9) MIDDLE BACK PANEL x 2 PCS
(#10) BOTTOM BACK PANEL x 1 PC
(#12) WHEEL WITH BRAKE x 2 PCS
(#16) SCREW C (M4x18L) x 16 PCS
(#17) SCREW D (M8x18L) x 16 PCS
(#14) CORNER PROTECTION x 2 PCS
3
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department. (Please refer to page 11)
(#41) SCREW F (M4x8L) x 80 PCS
(#58) BUMPER x 4 PCS
(#23) MAGNETx 2 PCS
(#34) HOOK x 12 PCS
(#21-A) SCREWDRIVER x 1 PC
(#22) KEY x 2 PCS
(#42) SCREW G (M4X30) x 6 PCS
(#60) Mounting Strap x 2 PCS
4
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department. (Please refer to page 11)
(#27-B) WASHER (M8) x 2 PCS
(#27) WASHER (M4) x 2 PCS
(#55-A) Wall Anchor x 2 PCS
(#55) Screw M (M6 x 50L) x 2 PCS
(#61) Screw O (M4 x 12L) x 2 PCS
M8X20 pcs
5
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please contact our
customer service department. (Please refer to page 11)
TIP:
Step 1:
Step 2:
This package contains an updated product
construction designed for easier transportation
while maintaining a rigid structure.
Maximum loading capacity is 600 LBS.
A magnetic screwdriver is included for your
convenience. If using a power screwdriver,
keep toruqe setting on LOW during assembly.
Place the Bottom Panel (#4) with the front facing
down. Attach the Left and Right Side Panels (#1
and #2) with 6 pcs of Screws G (#42).
*Note: Before tightening the screws, make sure
the bottom corners of the Left and Right Side
Panels (#1 and #2) are completely flushed with
the back and front corners of the Bottom Panel
(#4).
Install Bottom Panel (#4).
Install Left and Right Side Panel (#1 and #2) to
the Top Panel (#3).
Place the Right Panel (#2) on the ground
vertically. Make sure the front of the panel faces
downward. Place the Top Panel (#3) next to the
Left Panel (#1). Line up the screw holes, insert and
tighten 3 pcs of Screws F (#41) using Screwdriver
(#21-A). Install the Right Panel (#2) the same way.
Note: The screw holes have some tolerance –
small adjustments may be needed during
assembly.
#3
#1
#2
#41
#1
#2
#4
#42
6
UltraHD® Tall Storage Cabinet (Model No. 16234)
*NOTE: We recommend using TWO people to assemble the cabinet.
Step 3:
Step 4:
Note:
Install the Wheels (#12 and #13).
B. Install both Middle Back Panels (#9) above
Bottom Back Panel (#10) the same way. Place the
groove of the Middle Back Panel (#9) onto the top
edge of the Bottom Back Panel (#10) and use 8
pcs of Screws F (#41) to install.
C. Use 7 pcs of Screw F (#41) to install the Upper
Back Panel (#8) the same way.
Install the Wheels with Brake (#12) onto the front
of the cabinet and screw the Wheels W/O Brake
(#13) onto the back of the cabinet. Use Screws D
(#17) and Screw Driver (#21-A) to install.
Make sure the Wheels with Brake (#12) are in
LOCKED position and stand the cabinet upright
after installing the four wheels.
Install the Back Panels (#8, #9 and #10).
A. Use 7 pcs of Screws F (#41) to install the
Bottom Back Panel (#10) onto both Left and Right
Side Panels (#1 and #2) and Bottom Panel (#4).
7
UltraHD® Tall Storage Cabinet (Model No. 16234)
*NOTE: We recommend using TWO people to assemble the cabinet.
Step 5:
Note:
Step 6:
Install the Middle Magnet (#23).
B. Place each Middle Shelf (#5) into cabinet
and push down onto the Hooks (#34).
A. Decide the height for the each Middle Shelf
(#5) and place the Hooks (#34) into the hook
slot and push down.
Each Middle Shelf (#5) needs a hook at the
four corners to support it. Place Hooks (#34)
at the four corners and make sure they are at
the same height.
Use 4 pcs of Screws F (#41) to install the
Magnet (#23) on the Top Panel (#3) and the
Bottom Panel (#4).
Install the Middle Shelves (#5).
8
UltraHD® Tall Storage Cabinet (Model No. 16234)
*NOTE: We recommend using TWO people to assemble the cabinet.
Step 7:
Step 8:
Step 9:
B. Use 20 pcs of Screws F (#41) to install the
Corner Protection (#14 and #15) onto the top of
the cabinet.
Note: The screw holes on the door hinge have
tolerance, enabling the door to be adjusted and
centered in the door frame.
Note: There is a difference in shape of the Corner
Protection (#14) for the left front and right back
and the Corner Protection (#15) for right front and
left back.
Move the cabinet to desirable place and use Key
(#22) to lock the doors.
Install the Left and Right Doors (#6 and #7).
A. Attach the Left Door (#6) to the unit using
10 pcs of Screws F (#41) to tighten it.
A. Use 16 pcs of Screws C (#16) to install the
4 Bumpers (#58) onto the four corners of the
Bottom Panel (#4).
B. Install the Right Door (#7) the same way.
Install the Bumpers (#58) and Corner Protection
(#14 and #15).
9
UltraHD® Tall Storage Cabinet (Model No. 16234)
*NOTE: We recommend using TWO people to assemble the cabinet.
Step 10:
UltraHD® Stainless Steel Care Instructions
• Lightly wipe with warm water and clean microfiber cloth
• Always wipe in the direction of the surface grain (NEVER ACROSS)
• Wipe away excess water with dry clean cloth
UltraHD® Tall Storage Cabinet (Model No. 16234)
*NOTE: We recommend using TWO people to assemble the cabinet.
Install Mounting Strap (#60)
A. Remove 1 pc Screw F (#41) from the back corner
protection.
B. Attach the Mounting Strap (#60) to the back
Corner Protection brackets as the left photo shows
using Screw O (#61) and Washer (#27).
C. Drill a hole in the wall with a 5/16" drill bit,
insert the Wall Anchor (#55-A) into the hole.
D. Attach the other end of the Mounting Strap
(#60) to the wall using Screw M (#55) and Washer
(#27-B).
Repeat steps A through D to install the other
mounting strap.
Warning: To prevent possible tipping, it is
suggested that the Mounting Straps be installed.
For safety, secure the mounting straps to wood
studs whenever possible.
The stainless steel is protected with UltraGuard® fingerprint resistant finish.
DO NOT use traditional stainless-steel cleaners. To safely manage unwanted
fingerprints and prevent new stains, perform the following steps once monthly:
10
Seville Classics, Inc.
19401 Harborgate Way Torrance, CA 90501 USA
Telephone: (800) 323-5565 within USA
Fax: (310) 533-3899
Hours: 9:00am - 4:30pm (Pacific Standard Time)
E-mail: supp[email protected]
Website & Online Store: www.sevilleclassics.com
UltraHD® Tall Storage Cabinet UltraHD® Mega Storage Cabinet
Model No. 16236 (Granite) Model No. 16238 (Granite)
Model No. 20143 (Graphite)
Model No. 20148 (Graphite)
Model No. 20153 (Red) Model No. 20158 (Red)
Model No. 20133 (White)
CONTACT INFORMATION
If you are missing any parts, have any questions, or need additional assistance in assembly, please contact our
bilingual (English and Spanish) customer service department at:
***Please visit our website or call and inquire about our additional UltraHD Line***
UltraHD® Line
11
UltraHD® 4-Drawer Rolling Cabinet UltraHD® 6-Foot Height Adjustable Workbench
Model No. 20205 (Granite)
Model No. 20292 (Granite)
UltraHD® Wall Cabinet with Open Shelf UltraHD® 2-Door Rolling Workbench
Model No. 20230 (Granite) Model No. 20262 (Granite)
Model No. 20140 (Graphite) Model No. 20142 (Graphite)
Model No. 20150 (Red) Model No. 20152 (Red)
UltraHD® Rolling Trash Bin
UltraHD® Lighted Workcenter
Model No. 20215
Model No. 20247 (Granite)
Model No. 20246 (Graphite)
Model No. 20157 (Red)
UltraHD® Line
/
