Cetacea Sound Astronaut XL Soundfield Operating instructions

Astronaut XL Soundfield

Brand: Cetacea Sound

Model: Astronaut XL Soundfield

Type: Operating instructions

This manual is also suitable for

Astronaut CL Soundfield

Astronaut Soundeld

Wireless Voice Amplication System

PAIRING INSTRUCTIONS

© 2018 Cetacea Sound Corp. All rights reserved.

Astronaut

TM

is a trademark of Cetacea Sound Corp.

(800) 556-1922 [email protected]om www.cetaceasound.com

Orbiter Pairing Instructions

1) Make sure the Orbiter pendant transmitter has been properly charged

and is NOT connected to the charger.

2) The Orbiter transmitter must be ON in order to pair (green LED)

3) The Astronaut Soundeld must be ON in order to pair (green LED)

4) Straighten the end of a medium paper clip.

5) Insert the end of the paper clip approximately ¹/

16

" (1.5 mm) into the

pairing hole on the Astronaut Soundeld speaker. Use a light press when

inserting the paper clip not to damage the hardware. The amber light will begin

to ash indicating that it’s in pairing mode.

6) Insert the end of the paper clip approximately ½” (1.3 cm) into the pairing hole

on the transmitter. Use a light press when inserting the paper clip not to

damage the hardware. Successful pairing will result in a solid amber light on the

Astronaut Soundeld.

7) Receiver pairing mode lasts only a short time. If unsuccessful, repeat steps

5 and 6.

Orbiter Pendant Transmitter

Astronaut Soundeld Speaker

ASTRONAUT SOUNDFIELD

PAIRING HOLE

TRANSMITTER

PAIRING HOLE

1

Cetacea Sound Astronaut XL Soundfield Operating instructions

Astronaut XL Soundfield

Brand: Cetacea Sound

Model: Astronaut XL Soundfield

Type: Operating instructions

This manual is also suitable for

Astronaut CL Soundfield

Related papers

Other documents