AD-KITROCC1-ACE

Highwood AD-KITROCC1-ACE Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Highwood AD-KITROCC1-ACE Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Classic Westport Rocking Chair
Assembly Guide
1) With the Back and Seat on Their
Sides, Attach One Side of the Back
to the Seat Using Two "A" Bolts.
2) Repeat on Other Side.
ROCCW30
03.17.2017
A
x 10
1/4"-20 X 1-3/4"
B
1/4"-20 X 2"
x 6
A
SEAT
BACK
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Classic Westport Rocking Chair
Assembly Guide
ROCCW30
03.17.2017
B
A
A
LEG ASSEMBLY
ARM ASSEMBLY
LEG ASSEMBLY
BACK
SEAT
INSERTS FACING TOWARD
SEAT AS SHOWN
3) Attach Front of Leg Assembly to Seat
Using Two "A" Bolts as Shown Above.
Attach Back of Leg Assembly to Seat Using
Two "B" Bolts as Shown Below.
4)Repeat on Other Side.
5) Attach Arm Assembly to Leg Using One
"B" Bolt. Attach Arm Assembly to Back
Using One "A" Bolt.
6) Repeat on Other Side.
BACK
B
BACK
SEAT
LEG ASSEMBLY
/