Quickstart Guide
Thank you for purchasing this Visual Land
Player. Please read through the user
manual in order to understand the
functions of your new player.
Adding Your Files to the Player
When connected to a PC, the player acts
as a standard USB-Disk drive, supporting
Windows 98SE/ME/2000/XP/Vista.
Once your player is detected, you simply
drag and drop or cut and paste the files
that you wish to save to the player’s internal
memory.
Charging the Player
Your player can be charged through either
a USB wall charger or by being directly
connected to the computer. Please note
that charging times vary between these
two methods, the wall charger is the
quicker method.
NOTE: Make sure that your player is in the
“ON” position in order for charging to take
place.
Buttons
To access the various functions of the
player, simply hold down or press the player
buttons as described below:
MENU: Enter sub menus or select options.
Holding down the menu button will let you
return to the main menu.
and : Scroll through your music, video
and other options.
VOL: Adjust the volume.
: Start and stop music or videos. Holding
down this button will shutdown the player.
GENERAL OVERVIEW
Video Playback
MP3/WMA Playback
Jpeg Picture Viewer
Voice Recording
Various Playback Modes
Multiple Language Support
•
•
•
•
•
•
BASIC FEATURES:
Turning on the Player
To turn on the player, simply switch the
player to the “ON” position. The on/off
switch is located on the top left of the
player. If your player is already switched on,
hold down the play button.
Main Menu
Below are the sub menu’s that can be found
on your player’s main menu:
Music: Listen to your music files
Movie: Plays the videos you have saved
Record: Record with the built-in
microphone
Voice: Plays your recordings
Photo: Displays your pictures
Setup: Change the settings on your player
E-Book: Read text files
To select an option from the main menu,
scroll to the option and press the MENU
button. To enter the sub menus, press the
menu button after selecting an option from
the main menu.
Music
To Enter the Music Sub Menu, press the
MENU button once, to select any options
while in the Music Sub Menu, also press
the MENU button.
and : Scroll through your music
selection.
VOL: Allows you to enter the volume menu.
: Starts and pauses your music
Changing Folder/Playback Functions
While music playback is stopped, press
the MENU button once, this will take you to
the folder select option. The MENU button
is used to select any folder and or song you
wish to playback. While music is playing,
pressing the MENU button will take you to
the playback options menu. You can
change the repeat options and equalizer
settings. Use the MENU button to select
options.
Movie
NOTE: In order to view your video files, you
must first convert the file and movie size.
Please see the section titled “Video
Conversion” for more information.
To Enter the Movie Sub Menu, press the
MENU button once, to select any options
while in the Music Sub Menu, also press
the MENU button.
and : Scroll through your video files.
VOL: Press once to enter the menu, then
using the scroll buttons to raise or lower
the volume, find your desired setting, and
press VOL again to exit. You can only enter
this menu when a video is not playing.
: Start and pause your video.
Sub Menu
You can select a folder to play or delete
files from the sub menu by pressing MENU
once while music is not playing.
Power Switch
Headphone
Jack
Speaker
(Back)
USB Port
Mic
Record
Press the MENU button to enter the
Record Sub Menu. Hold to return to the
main menu. Press MENU in record Sub
Menu to confirm an option. Press MENU
after recording to save your recording.
and : Sub menu only. Scroll through
options.
: Start and pause recording. From this
sub menu, you can select where you would
like files to be saved and the record type.
Record Types
Fine Recording: WAV Format, high sound
quality.
Long Recording: ACT Format, consistent
quality.
Fine VOR: WAV Format, sound control.
Long VOR: ACT Format, sound control.
(VOR mode is a sound activated recording)
Photo
Press the MENU button to enter the Photo
Sub Menu. Hold MENU to return to the
main menu.
Press the MENU button in the Photo Sub
Menu to confirm an option.
and : Scroll through your pictures.
: View the current selected picture.
From this sub menu, you can select a
different folder to view, delete files, and
start the slideshow option through Play
Set.
E-Book
Press the MENU button to enter the E-book
Sub Menu. When the desired text file has
been highlighted press the MENU button to
view it.
and : Scroll through the text.
: Read the current text file
Set Up
Below are brief descriptions of the settings
that can be changed from the Set Up
menu.
Date & Time: set the time and date
LCD Set: change the brightness and the
time (in seconds) before the screen will
turn dark when idle.
Language: change the language of the
player
Power Saving: change the time (in seconds)
before the player will turn off when idle.
Replay Mode: choose between manual and
auto replay
Memory Info: view how much memory
remains.
Firmware Version: view the firmware
version.
Video Conversion
In order to be able to play video files, you
will need to use the program that is located
in the player. Connect your player to your
computer via the USB cable. Once your
player is detected, locate the AMV
Conversion Tools folder in the player and
simply run the SETUP file to install the
program.
1. Once the setup is complete, locate the
newly installed MP3 Player Utilities in your
Start Menu and click on AMV convert tool.
2. Click on the "Input file" icon to find the
file that you are looking to convert and click
on the “Output file” icon and save the file to
your computer.
3. Now click on the icon with two arrow
(tooltip will show "Begin" if you put your
cursor on the arrows) to start the
conversion. Once the conversion is done
the program will playback the AMV file.
Note: Please click on help for further
information; it is the square box next to the
two arrows.
4. To transfer the converted AMV file onto
your player, first connect the Visual Land
player to your computer and copy and
paste the AMV file into the player folder.
5. To access the AMV file from your Visual
Land player, go into the "Movie" menu of the
player, the file should show up. Press "Play"
to view your file.
AMV Converter Software
Troubleshooting
Cannot fit more than 99 files onto the
player:
To fix this problem, create a new folder on
your player and insert your files there.
Please do not insert a subfolder within a
subfolder, as the player will not read it.
Short battery life:
The screen can drain the battery life of
your player. To increase the battery life, we
suggest that you change the brightness to
a lower setting & lower the time it takes
for the player screen to turn off when idle.
Unable to download music files:
Check whether the USB is connected
properly or damaged.
Try restarting the computer or using a
different USB port.
Ensure the player’s memory is not full.
For further details on how to use your
player, consult the full PDF manual located
inside the player or download it from our
website: http://www.visual-land.com
If you have a problem with your player
please visit our website and view our
support pages.
Copyright © 2011 Visual Land Inc.
Click to select “Input File” to be converted
Click to select “Output Folder” and “Filename”
Click to change “Settings”
Click to begin “Conversion”
“Conversion” progress status
Files to be converted
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Visual Land Daze User manual
-
-
Visual Land V-Tap VL-902 Owner's manual
-
-
-
-
-
-
-
