Panasonic RFD3 Operating instructions

Brand: Panasonic

Model: RFD3

Type: Operating instructions

Whip antenna

RQTT0867

Connections

The speaker does not

have magnetic

shielding. Do not place

this unit near televisions,

personal computers or

other devices easily

influenced by

magnetism

Note

Headphones (Not included)

Reduce the volume before connecting.

Plug type: 3.5 mm stereo

PHONES

Avoid listening for prolonged periods of time to prevent

hearing damage.

Note

Extend the whip antenna and adjust its direction

Control guide

To improve

reception

If noise is excessive in FM

You can improve FM reception by switching

reception from “AUTO STEREO” to “MONO”.

Standby/on switch [ ]

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming

a small amount of power. The unit is in the standby condition when the AC adaptor is connected.

The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.

Standby/on

switch []

Connecting to external recording

equipment

(Cables and equipment not included.)

Carefully read the operating instructions of the other

equipment before using.

LINE OUT

REC IN

(R)

(L)

Tape deck, etc.

Plug type:

3.5 mm stereo

Tuning control

FM frequency select,

DAB station tune,

Menu select, Time

adjust control.

Volume control

Menu confirmation

button [ENTER/

-TIMER CHECK]

FM or DAB

select button

[TUNER/BAND]

Menu button [MENU]

Display button [DISPLAY]

DAB primary/secondary select button

[PRIMARY/SECONDARY]

Speaker

Sound EQ/Sound

virtualizer button

[SOUND EQ/

–S.VIRTUALIZER]

Numbered

buttons [+5,1-5]

Display

Select “MONO” Press

Select “FM

MODE ADJUST”

Press Press

AC adaptor

Connect the AC adaptor firmly to the

unit and the outlet.

The included AC adaptor is for use with

this unit only. Do not use it with other

equipment.

Note

9VDC IN

To household

mains socket

RQTT0867

DAB operationsFM Radio operations

What is DAB?

DAB stands for digital audio broadcasting. It is a new form of radio that is

broadcast digitally. Digital audio provides a superior quality of sound

compared to regular analogue broadcasting.

DAB structure

Band

There are two types of DAB bands, “BAND III ” (Receivable on this unit) and

“L BAND” (Not broadcast in the UK, and not receivable on this unit).

Frequencies

There are 41 frequencies on BAND III . Among those frequencies, 7 are

used in the UK (current as of November, 2005).

Ensemble, station and service

The number of stations that make up one frequency differ between DAB

and analogue radio. Analogue stations all broadcast on different

frequencies, even if it is the same company doing the broadcasting. With

DAB however, it is possible to broadcast a number of stations on the same

frequency.

In DAB terminology, a group of stations on the same frequency is called an

ensemble.

DAB reception method on this unit

Depending on the region there is a difference between broadcast

frequency and stations broadcast along the same frequency. For

this reason, a memory of receivable stations should first be created

and then selected from those memorized stations.

DAB Auto Scan

This function searches for currently receivable stations and inputs them into

unit memory.

When DAB is selected for the first time, this function starts automatically.

Station Memory Updating

• When there is a station name change

Station names are updated automatically when a station name that was

stored in memory before the update was selected. However preset

registered station names are not changed, therefore you need to perform

presetting again.

• When a new station begins broadcasting

When a new station name is found on the frequency currently being

broadcast, it is automatically added to the list of station names created

with Auto scan.

As shown in the above diagram, an ensemble consists of a group of

stations which have primary services, they can also have secondary

services. This means, for example, that commentary on sports events from

different areas can all be broadcast at once.

PRIMARY

SERVICE

PRIMARY

SERVICE

SECONDARY

SERVICE 1

PRIMARY

SERVICE

SECONDARY

SERVICE 1

SECONDARY

SERVICE 2

STATION 1 STATION 2 STATION 3 STATION 4

ENSEMBLE

PRIMARY

SERVICE

Even if the station is stored into memory, some stations may not broadcast

depending on the time of day etc. If this occurs, “NO SERVICE” is

displayed.

Note

• Deleting stations that are no longer broadcasting is not automatic. If you want

to delete a station, perform Auto scan again and the new memory is created.

• When a new frequency begins broadcasting, stations on that new

frequency are not automatically added to memory. Perform Auto scan to

add them to memory. Also, you may need to change the Auto scan range if

the new frequency is outside the factory set Auto scan range (→ Page 5).

Note

Manual tuning

FM radio stations can be tuned manually by selecting the

station's frequency.

Auto tuning

The unit scans for a station automatically.

Manual tuning and Auto tuning

Auto tuning may not function when there is excessive

interference.

Note

Select “FM” Select frequency

Select

“FM TUNE

ADJUST”

Press Press PressSelect

“AUTO

TUNE”

• To cancel auto tuning, select “MANUAL TUNE” in the “AUTO

TUNE” selection above.

Input using the numbered buttons

To select a number greater than 5

e.g. 7:

→

[TUNER/BAND]

[ENTER/

-TIMER CHECK]

[MENU]

Preset tuning

Radio stations can be preset into channels

to make it easy to tune.

You can preset up to 10 FM channels.

To preset

Tune to the

station you

want to set

as the preset.

To select a channel

→

The station occupying a channel is erased if another station

is preset over that channel.

Note

Press and hold the

desired numbered button

for more than 1 second

F M 87. 50MHz

PROGRAM c h 3

Select “FM”

—

Spin the

tuning

control

To adjust

the volume

VOL 1 5

(Minimum)

(Maximum)

Press

—

Within 10 seconds

To turn

on the

unit

F M 87. 50MHz

• To select a number greater than 5

e.g. 7: Press and press and hold

e.g. 7:

→

Within 10 seconds

• To select a number greater than 5

RQTT0867

DAB stations can be tuned manually by selecting

the station name in alphanumeric order.

DAB

Informat ion

MU S I C DAB

Mus i cPop

MU S I C

DAB

ONEDAB ENSEMBLE

MU S I C

DAB MUS I C

11D

–

222. 064MHz

DAB MUS I C

CLOCK 1 2 : 0 0

1. Enter DAB mode.

2. Select the station.

“Scan Failed.” appears if no stations are memorized.

If this occurs, adjust the antenna or relocate the unit, then try

Auto scanning. (→page 2 and bellow)

Note

• When updating memory with Auto scan, preset stations are

not erased or changed.

•

When a frequency cannot be received, the previous memory is restored

Note

DAB Auto Scan

Receivable stations are updated into

memory.

Presetting

Stations can be preset into channels to make

selection easier. You can preset up to 10 channels.

Display

You can change information displays.

Listening to a secondary service

DAB

>>>>

A uto Scan. . .

DAB A uto Scan. . .

DAB

Informat ion

12B

ENSEMB L E ONE

MU S I C

If you are selecting

DAB for the first time,

stations that are

currently receivable

are memorized.

The station first in

alphanumeric order

is broadcast.

When a frequency is

tuned the ensemble

corresponding to the

frequency is displayed.

The station name changes in alphanumeric order.

DAB

Informat ion

MU S I C

The unit comes on.

Select a display

DAB reception

quality indicator

Information about the broadcast

Station

name

Receivable stations are different depending on the area you live

in. If you have moved perform Auto scan and the stations are

updated into memory.

“” is displayed if there is a

secondary service broadcast.

When a frequency is tuned by Auto scanning on this unit, the

ensemble corresponding to the frequency is displayed for

approximately 2 seconds.

Secondary service can be selected with each press of the

button. The unit returns to the primary service after the last

secondary service.

The following information displays are available while enjoying

DAB.

Press and hold until “DAB

Auto Scan...” appears

Select a

secondary service

Each time you press the button:

Dynamic label

(information about the broadcast) PTY display (program type)

Time display

Ensemble label

(the name of the ensemble)

Frequency display

To preset

Select the

station you

want to set as

the preset.

To select a channel

You cannot preset stations when the station is not broadcasting

or when you are selecting a secondary service.

Note

Press and hold the

desired numbered button

for more than 1 second

PROGRAM c h 3

DAB MUS I C

—

Select “DAB”

Manual tuning

To adjust the volume

VOL 1 5

(Minimum)

(Maximum)

Input using the

numbered buttons

To select a number

greater than 5

e.g. 7:

→

[ENTER/

-TIMER CHECK]

[MENU]

[DISPLAY]

[PRIMARY/

SECONDARY]

[TUNER/

BAND]

Press

—

Select “DAB”

To turn on

the unit

DAB

>>>>>. . .

A uto Scan

→

Within 10 seconds

• To select a number greater than 5

e.g. 7: Press and press and hold

→

Within 10 seconds

• To select a number greater than 5

e.g. 7: Press and press and hold

e.g. 7:

→

Within 10 seconds

• To select a number greater than 5

RQTT0867

When the “DAB SCAN MODE” is changed, the DAB preset

channels are erased and if the DAB play timer has been set the

timer switches to off.

Note

Checking the

DAB signal quality

While monitoring the signal quality on

the display, adjust the antenna to

improve reception.

In order to enjoy the new stations after adjusting the antenna, it

is necessary to perform Auto scanning and update the station

memory.

Note

ALL BAND III Frequency

Frequency block

10A

Frequency (MHz)

174.928

176.640

178.352

180.064

181.936

183.648

185.360

187.072

188.928

190.640

192.352

194.064

195.936

197.648

199.360

201.072

202.928

204.640

206.352

208.064

209.936

Frequency block

10N

10B

10C

10D

11A

11N

11B

11C

11D

12A

12N

12B

12C

12D

13A

13B

13C

13D

13E

13F

Frequency (MHz)

210.096

211.648

213.360

215.072

216.928

217.088

218.640

220.352

222.064

223.936

224.096

225.648

227.360

229.072

230.784

232.496

234.208

235.776

237.488

239.200

Shaded areas are frequencies used currently as of November, 2005 in

the UK (“United Kingdom”).

Changing the Auto scan frequency range

Only the frequencies currently used in the UK as of November,

2005 on BAND III are Auto scanned (“United Kingdom”, factory

setting). Select

“ALL BAND III” when you want to store stations

other frequencies to memory.

(E.g. When using on the European mainland or when a new

frequency

begins broadcasting other than the “United Kingdom”,

use “ALL BAND II

I”.)

DAB Preparatory steps

(

Other functions

)

Turning the

automatic clock

adjustment function on

Time information that is

transmitted during DAB

broadcasting is read and the

time is adjusted automatically .

First of all, make sure the unit is in DAB mode.

• To cancel partway

–––– ––––

SIGNAL QUAL.DAB

–––– ––––

SCAN MODEDAB

–––– ––––

CLOCK ADJUST

–––– ––––

TIME R ADJUST

–––– ––––

S LEEP ADJUST

–––– ––––

ADJ . SETAUTO

Press

Select “ADJUST ON”

Press

Select “DAB SCAN MODE”,

“DAB SIGNAL QUAL.”, or

“AUTO ADJ. SET”

Within 10 seconds

First, select “AUTO ADJ. SET” in the DAB preparatory steps.

Select “ADJUST OFF” to turn the automatic clock adjustment

function off.

–

AUTO

ONADJUST

ADJ

–

CLOCK

Within 10 seconds

First, select “DAB SCAN MODE” in the DAB preparatory steps.

Auto scan begins automatically after the change has been made.

Select “ALL BAND III ” or

“United Kingdom”

Press

–

DAB

–

BAND IIIALL

AUTO SCAN

Within 10 seconds

First, select “DAB SIGNAL QUAL.” in the DAB preparatory steps.

12B

–

2 25. 648MHz

Select the frequency

FrequencyFrequency

block

Reception quality

0 (poor) -16 (excellent)

• To cancel the signal quality check

• To cancel partway

VOL 1 5

(Minimum)

(Maximum)

To adjust the volume

Input using the numbered

buttons

To select a number greater than 5

e.g. 7:

→

[ENTER/

-TIMER CHECK]

[MENU]

→ Page 6

To turn on

the unit

• To cancel partway

Press

TIMER

–

ON →

ONPLAY

0:00 OFF 0

TIMER ADJUST

ON →

0:00 0

00OFF

TIMER ADJUST

ON →

7:30 8

30OFF

CLOCK ADJUST

CLOCK 1 8 : 0 0

RQTT0867

Timer and others

Play timer

Play of the selected source begins at the

selected time.

SLEEP timer

The SLEEP timer can turn the unit off

after a set amount of time.

• To check the remaining time

Press to select “SLEEP ADJUST” and press

Select “SLEEP

ADJUST”

Press Press

• Each time you turn the tuning control:

If you turn the unit off and on again while the timer is

functioning, the end time setting will not be activated.

Note

The timer function will be canceled, but the settings stay in the

memory. The timer comes on every day if the timer is on.

Note

• You can enjoy other sources after you have set the timer.

• If the DAB station that is not being broadcast is selected or if a DAB

secondary service is selected, the play timer cannot be turned on.

Note

The play and sleep timer can be used together.

The sleep timer always has priority. Be sure not to overlap

timer settings.

Note

• To change the timer

Perform timer setting again (Perform step1-2, above).

• To check the setting while the unit is off

SLEEP 30 SLEEP 60

SLEEP OFF (Canceled)

SLEEP 90

SLEEP 120

Setting the time

This is a 24-hour clock.

• To display the clock when the unit is on

Select

“CLOCK

ADJUST”

• The clock is accurate to within ±60 seconds a month.

Readjust if necessary.

• You can also use the DAB automatic clock adjustment

function (→page 5).

• While the DAB automatic clock adjustment is on, the time

setting function dose not work.

Note

Set the timePress

Press

Press Press

Select

“TIMER

ADJUST”

Select “ON”Press Press Press

Within 10 seconds

Select the start time

Confirm the start

time

Preparation: Select the source and adjust the volume.

Set the clock (see left).

1. Perform timer settings

Enter the time setting mode

Select “TIMER

ADJUST”

Select “OFF”Press

Press and hold

Press Press

2. Confirm the timer setting is ON

The unit must be off for the timer to operate.

Set the start time

Select the end time

Turn the unit off

“” is on the display

Confirm the end time

Set the end time

• To cancel the timer while the unit is on

[ENTER/

-TIMER CHECK]

[MENU]

[DISPLAY]

[SOUND EQ

-S.VIRTUALIZER]

Within 10 seconds

To turn on

the unit

RQTT0867

Safety precautions

Placement

Set the unit up on an even surface away from direct sunlight, high

temperatures, high humidity, and excessive vibration. These

conditions can damage the cabinet and other components, thereby

shortening the unit's service life.

Place it at least 15 cm away from wall surfaces to avoid distortion

and unwanted acoustical effects.

Do not place heavy items on the unit.

Foreign matter

Do not let metal objects fall inside the unit. This can cause electric

shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock or

malfunction. If this occurs, immediately disconnect the unit from the

power supply, remove all the batteries and contact your dealer.

Do not spray insecticides onto or into the unit. They contain

flammable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is

interrupted, indicators fail to light, smoke appears, or any other

problem that is not covered in these instructions occurs, disconnect

the AC adaptor, remove all the batteries and contact your dealer or

an authorized service center. Electric shock or damage to the unit

can occur if the unit is repaired, disassembled or reconstructed by

unqualified persons.

Extend operating life by disconnecting the unit from the power

source if it is not to be used for a long time.

Maintenance

To clean this unit, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this unit.

• Before using chemically treated cloth, read the instructions that

came with the cloth carefully.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT

DAMAGE, DO NOT EXPOSE THIS APPARA TUS TO RAIN, MOISTURE,

DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH

LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON T HE APPARA TUS.

The socket outlet shall be installed near the equipment and easily

accessible or the mains plug or an appliance coupler shall remain readily

operable.

This product may receive radio interference caused by mobile

telephones during use. If such interference is apparent, please increase

separation between the product and the mobile telephone.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

CAUTION!

• DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-

IN CABINET OR IN ANOTHER CONFINED SPACE.

ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF

ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING,

ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT

OBSTRUCT THE VENTILATION VENTS.

• DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH

NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.

• DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS

LIGHTED CANDLES, ON THE UNIT.

• DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY

MANNER.

Sound quality

You can choose one of four types of

sound quality.

Press

Press and hold to turn the

Sound Virtualizer ON/OFF

• Each time you press the button:

(Adds punch

to rock)

(Clarifies higher

sounds)

XBSCLEAR

(Turns the sound

quality function off)

EQ-OFF

(For background

music)

SOFT

(Adds gloss to vocal)

VOCAL

The actual effect depends on the source played.

Note

Sound Virtualizer

You can create a three-dimensional

sound field when listening to stereo

sound .

Display

(While enjoying FM radio or DAB)

Press

• For FM radio

The clock display can be turned on and off.

• For DAB (

ÆÆ

page 4)

Press and hold to

select “DIMMER ON” or

“DIMMER OFF”.

DIMMER ON

Dimmer

You can dim the LCD light when

enjoying FM radio or DAB.

Information on Disposal for Users of Waste Electrical & Electronic

Equipment (private households)

This symbol on the products and/or accompanying

documents means that used electrical and electronic

products should not be mixed with general household

waste.

For proper treatment, recovery and recycling, please take

these products to designated collection points, where

they will be accepted on a free of charge basis.

Alternatively, in some countries you may be able to return your products

to your local retailer upon the purchase of an equivalent new product.

Disposing of this product correctly will help to save valuable resources

and prevent any potential negative effects on human health and the

environment which could otherwise arise from inappropriate waste

handling. Please contact your local authority for further details of your

nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in

accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact

your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities

or dealer and ask for the correct method of disposal.

(R14/LR14)

Push

Press

down

Pull out

Before playing starts the battery indicator may flash although the

batteries are not drained. It appears correctly once you start play.

Note

RQTT0867

TW1105C0

Using batteries (not included)

The unit cannot be

if the AC adaptor is

connected.

Troubleshooting guide

Use of batteries

Display

sound or there is

a lot of noise.

Humming heard

during play.

A beat sound i

heard while receivin

a radio broadcast

The picture on the

television near the

set disappears or

stripes appear on

the screen.

DAB

reception is

poor.

• Keep this unit away from mobile

telephones.

• Turn the volume up.

• Switch off the unit, determine and

correct

the cause, then switch the unit

on.

• An AC adaptor or fluorescent light is

near

the cables. Keep other appliances

and cords away from this unit's cables.

• Turn the TV off or separate it from the

unit.

• The location and orientation of the

antenna are incorrect.

• The TV antenna wire is too close to the

unit.

Separate the antenna wire of the

TV set from the unit.

• Keep the antenna away from computers,

televisions, other cables and cords

When to change the batteries

When the battery indicator begins

flashing, replace all 6 of the batteries.

Before requesting service, make the following checks. If you are in

doubt about any of the check points, or if the solutions indicated in the

chart do not solve the problem, consult your dealer for instructions.

Removing the batteries

Rear row batteries

Press down on the right end of

the middle battery to raise the

positive pole so that the batteries

can be taken out easily.

Front row batteries

After taking out the rear row

batteries, gently lift the right end

of the middle battery so that the

batteries can be taken out easily.

Memory back-up

In the case electricity is cut off when using either batteries or the

AC adaptor with this unit, the clock time is not saved, therefore it is

necessary to reset the time again (→ page 6).

Approximately 10 minutes of memory is maintained for the Preset

function (FM/DAB), Play Timer function, and list of station names

created with Auto scan.

• If this unit is not used for a long period of time or is used

only from an AC power source, remove all the batteries to

prevent potential damage due to possible battery leakage.

• Align the poles (+ and –) properly when inserting the batteries.

• Do not mix old and new batteries or different types of batteries.

• Do not recharge ordinary dry cell batteries.

• Do not heat or disassemble the batteries. Do not allow them to

contact flame or water.

• Do not keep together with metallic objects such as necklaces.

• Do not use rechargeable type batteries.

• Do not use batteries if the covering has been peeled off.

Mishandling of batteries can damage other items, cause damage

to the unit, and may cause a fire through short-circuiting or

electrolyte leakage.

If electrolyte leaks from the batteries, consult your dealer. Wash

thoroughly with water if electrolyte comes in contact with any part

of your body.

– –:– –

ERROR

NO SERVICE

NO SIGNAL

DATA

SCRAMBLED

Scan Failed.

( indicates a

number.)

STATION FULL

• You plugged the AC adaptor in or used

batteries if the AC adaptor was not connected

for the first time or there was a power failure

recently. Set the time. (→ page 6)

• Incorrect operation performed. Read the

instructions and try again.

• The station is currently not broadcasting.

• This station cannot be received. Check your

antenna (→ page 2).

• Data broadcast being received over the

DAB broadcast signal cannot be used on

this unit.

• The broadcast station being received

cannot be accessed (E.g. pay per use etc.).

• Stations are not receivable. Check your

antenna and try Auto scanning (→ page 2, 4).

• Connect the AC adaptor firmly to the unit and

the outlet. If the unit still cannot be turned on,

disconnect the AC adaptor, remove the

batteries, and consult your dealer.

• DAB station memory is full. Use the

following method to clear station memory.

1. Press .

2. Select “STATION CLEAR” with .

3. Press . “OK? Push ENTER” is

displayed.

4. Press .

Station memory is erased and the unit

automatically begins Auto scanning.

Front row

Rear row

Bottom of product

Matsushita Electric Industrial Co., Ltd.

Web site: http://www.panasonic.co.jp/global/

Specifications

Supplied accessories

Operating Instructions

DAB-FM Radio

Model No. RF-D3

Dear customer

Thank you for purchasing this product.

Before connecting, operating or adjusting this product, please

read the instructions completely.

Please keep this manual for future reference.

“EB” on the packaging indicates the United Kingdom.

Note

• The included AC adaptor is for use with this unit only. Do not

use it with other equipment.

• Do not use an AC adaptor from any other type of equipment

with this unit.

Note

RQTT0867-E

Power consumption in standby mode: 1.3 W (AC adaptor)

Specifications are subject to change without notice.

Mass and dimensions are approximate.

• Frequency range

DAB BANDIII

(For the United Kingdom)

• Terminals

OutputPHONES

LINE OUT

• Power output

• Power supply

AC adaptor

Battery

• Battery life

(Panasonic alkaline battery)

• Power consumption

• Speakers

Full range

•

Maximum Dimensions

¥¥

Cabinet Dimensions (W

¥¥

• Mass

With batteries

Without batteries

87.50-108.00 MHz (50 kHz steps)

5A-13F (174.928-239.200 MHz)

11B-12D (218.640-229.072 MHz)

3.5 mm stereo (32 W )

3.5 mm stereo (2.2 kW )

1.8 W + 1.8 W (RMS)

AC 230-240 V, 50 Hz

DC 9 V, 1 A

DC 9 V (

Six R14/LR14, batteries

)

DAB: About 10 hours

FM: About 25 hours

16 W (AC adaptor)

5.7 cm, 6 W ¥ 2

260 ¥ 172 ¥ 84 mm

260 ¥ 166 ¥ 75 mm

1.4 kg

1.1 kg

Use the numbers indicated in parentheses when

asking for replacement parts.

1 AC adaptor (N0JEEG000001)

For the United Kingdom and Republic of lreland

Sales and Support Information

Customer Care Centre

• For UK customers: 08705 357357

• For Republic of Ireland customers: 01 289 8333

•

Visit our website for product information www.panasonic.co.uk

•

E-mail: [email protected]

Direct Sales at Panasonic UK

•

Order accessory and consumable items for your product with ease and

confidence by phoning our Customer Care Centre Monday

Thursday

9:00am

5:30pm, Friday 9:30am

5:30pm (Excluding public holidays).

• Or go on line through our Internet Accessory ordering application at

www.panasonic.co.uk.

•

Most major credit and debit cards accepted.

• All enquiries transactions and distribution facilities are provided directly

by Panasonic UK Ltd.

•

It couldn't be simpler!

•

Also available through our Internet is direct shopping for a wide range of

finished products, take a browse on our website for further details.

Panasonic RFD3 Operating instructions

Panasonic RFD3 Operating instructions

Panasonic RFD3 Operating instructions

Related papers

Other documents