Roberts Dreamdock 2 User guide

Please read this manual before use

2

DAB / DAB+ / FM RDS Digital Clock Radio with dock for iPod

®

and iPhone

®

Controls ........................................................................... 2-4

Remote handset battery replacement .................................5

Using the clock radio for the ﬁ rst time .................................6

Switching on your clock radio ..............................................7

Operating your clock radio...................................................8

Selecting a station - DAB.....................................................9

Secondary services - DAB.................................................10

Display options - DAB...................................................10-11

Finding new stations - DAB ...............................................12

Signal strength display - DAB ............................................12

Manual tuning - DAB .........................................................13

Dynamic Range Control (DRC) - DAB...............................14

Station order setup - DAB..................................................15

Prune stations - DAB .........................................................16

Operating your clock radio - FM auto-tune ........................17

Manual tuning - FM............................................................18

Display options - FM ..........................................................19

Presetting stations ....................................................... 20-21

Stereo / Mono setting - FM ................................................22

Scan sensitivity - FM .........................................................23

iPod and iPhone docking ...................................................24

Contents

Playing a ﬁ le on your iPod or iPhone........................... 24-25

Display modes - iPod mode...............................................25

Setting the alarm times ................................................ 26-28

Cancelling alarms ..............................................................29

Controlling alarm status .....................................................30

Snooze function .................................................................31

Sleep function ....................................................................32

Setting the clock and date manually ............................ 33-34

To return to auto clock set mode .......................................35

Equalizer function ........................................................ 36-39

Display backlight dimmer...................................................40

Contrast and viewing angle ...............................................40

Software version ................................................................41

USB socket for iPhone or smartphone charging ...............41

Language function .............................................................42

System reset......................................................................43

Headphone socket.............................................................44

Auxiliary input (Line in) socket ...........................................44

Cautions ............................................................................45

Speciﬁ cations and circuit features .....................................45

Guarantee.............................................................Back page

1

2

Controls (Top)

1. Snooze button

2. Select / Play / Pause button

3. Alarm 2 button

4. Alarm 1 button

5. Tuning Down / Rewind button

6. Sleep button

7. Dimmer button

8. Apple Lightning

®

connector

9. Preset button

10. Info button

11. Tuning Up / Fast-forward button

12. Mode button (DAB, FM, iPod, Aux in)

13. Menu button

14. On / Off / Volume control

1

2

3

4

6

7

5

8

9

10

11

12

13

14

3

15. LCD display

16. Speakers x 2

17. Infra-red sensor

Controls (front)

Controls (rear)

18. DAB/FM wire aerial

19. Auxiliary input socket

20. Headphone socket

21. USB Charging socket

22. USB socket (for software upgrades only)

23. DC in socket

2

17

15

19

16

Upgrade

DC In

12V /2.5A

18 20 22 23

21

4

1. On / Off button

2. iPod and iPhone button

3. FM button

4. DAB button

5. Mute button

6. Auxiliary in button

7. Tuning Up button

8. Menu button

9. Play / Pause button

10. Rewind button

11. Tuning Down button

12. Sleep button

13. Dimmer button

14. Snooze button

15. Alarm button

16. Equalizer (EQ) button

17. Info button

18. Fast-forward button

19. Preset button

20. Select button

21. Volume Up / Down buttons

1

Controls (remote control)

Note: For the sake of clarity, the instructions for the use of the controls throughout this instruction manual show the buttons on the clock radio. The

buttons on the remote can be used if you prefer. However the mute function is only available when using the remote control.

Please note: The mode button on the clock radio will access the DAB, FM, iPod and Auxiliary input modes.

234

5

6

7

8

9

10

11

15

1413

12

16

17

18

19

20

21

5

Remote handset battery replacement

1. With the aid of the end of a paper clip slide the catch to the right hand side.

2. Remove the battery holder by pushing the holder in the direction shown.

3. Remove the battery from the holder.

4. Replace the battery (CR2032 or equivalent) ensuring that the positive side of the

battery faces you with the holder positioned as shown.

5. Replace the battery holder.

If the remote is not to be used for an extended period of time it is recommended that

the battery is removed.

IMPORTANT: The battery should not be exposed to excessive heat

such as sunshine, ﬁ re or the like. After use, disposable batteries should if possible be

taken to a suitable recycling centre. On no account should batteries be disposed of

by incineration.

3

1

2

5

4

WARNING:

• Do not ingest the battery. Chemical Burn hazard.

• The remote control supplied with this product contains a coin/button cell battery.

If the coin/button cell battery is swallowed it can cause severe internal burns in

just 2 hours and can be fatal.

• Keep new and used batteries away from children they can be a choking hazard.

• If the battery compartment does not close securely, stop using the product and

keep it away from children.

• If you think batteries might have been swallowed or placed inside any part of the

body, seek immediate medical attention.

CAUTION

Danger of explosion if the battery is incorrectly replaced. Replace only with the same

or equivalent type.

6

Using the clock radio for the ﬁ rst time

1. Place your clock radio on a ﬂ at surface.

2. Fully extend the wire aerial located on the rear of your clock radio.

Place the wire antenna so that it is as straight as possible extending

either above or below the radio.

3. Insert the adaptor plug into the DC socket located on the rear of your

clock radio. Plug the adaptor into a standard 13 amp mains socket

outlet.

IMPORTANT: The mains adaptor is used as the means of connecting

the clock radio to the mains supply. The mains socket used for the clock

radio must remain accessible during normal use. In order to disconnect

the clock radio from the mains completely, the mains adaptor should

be removed from the mains socket outlet completely.

4. When your clock radio is ﬁ rst switched on the clock display will show

'Welcome to Digital Radio' for a few seconds and the display will show

'00:00' and the unit will enter the Standby mode. It will then scan for

DAB radio stations and when stations have been found the clock and

date should be set automatically.

5. If no stations have been found then the clock will not set. You may need

to relocate your clock radio to a position giving better reception. You

should then carry out an auto-tune to ﬁ nd stations. See Finding new

stations on page 12. The clock will then be set from a DAB broadcast.

Upgrade

DC In

12V /2.5A

7

Switching on your clock radio

Switching on - On / Off control in the Down position

1. Press and release the On / Off control to bring your radio out of standby.

The On / Off control will now be in the raised position.

2. While the clock radio is in use, press and release the On / Off control.

This will cause the radio to return to the standby mode and will latch

the control in the down position.

Switching on - On / Off control in the Up position

1. Press and release the On / Off control twice to bring your radio out

of standby. The On / Off control will now be in the raised position.

2. While the clock radio is in use press and release the On / Off control.

This will cause the radio to return to the standby mode and will latch

the control in the down position.

Switching on using your remote control

1. Press and release the On / Off button to switch your clock radio on.

2. Press and release the On / Off button to return to standby mode.

The operation of the remote control is unaffected by the position of

the On / Off control on the clock radio.

Volume control

1. While the clock radio is playing, the Volume control can be rotated

clockwise to increase the volume and anti-clockwise to decrease the

volume.

2. Alternatively press the Volume Up or Down buttons on the remote

control as needed.

Menu button

1. To access or exit the menu system, press and release the Menu button

as needed.

1,2

1

2

1

Operating your clock radio

1. Press the On / Off control to switch on your clock radio. (see page 7).

When ﬁ rst switched on, the clock radio will be in DAB mode. After each

use the clock radio will remember the mode used and then switch on

in that mode the next time that it is used.

2. If the radio has been used before, the last used station will be selected.

3. If this is the ﬁ rst time that the clock radio has been used a scan of

the Band III DAB channels will be carried out (depending on whether

scanning was already completed in Standby mode). During the

scanning process the display will show progress of the station search.

The number on the right of the display is the number of stations that

have been found.

4. When the scan is completed the ﬁ rst station (in numeric-alpha order

0....9, A....Z) will be selected. The ﬁ rst station in the list of stations

found during scanning will be played. The display will show the station

name.

5. If no signals are found then 'OFF AIR' will be displayed and it may

be necessary to relocate your clock radio to a position giving better

reception. You should then carry out a scan to ﬁ nd stations as described

on page 12.

Note: When ﬁ rst switched on the radio will set the volume to a moderately

high level in case the broadcast is very quiet. After you have set the volume

using the Volume control (see page 7) the radio will remember the setting

that you have applied for the next time that it is used.

1

8

Selecting a station - DAB

1. Press the On / Off control to switch on your clock radio.

2. Press and release the Mode button until the DAB mode is selected.

The display will show the name of the radio station currently selected.

3. Press the Tuning Up or Down buttons to step through the list of

available stations.

4. When the desired station name appears on the display, press and

release the Select button to select the station. The display will show

'Connecting' while your clock radio ﬁ nds the new station.

5. Adjust the Volume to the required setting.

Note: If after selecting a station the display shows 'OFF AIR' it may be

necessary to relocate your clock radio to a position giving better reception.

9

1

2

33

4

5

10

Secondary services - DAB

1. Certain radio stations have one or more secondary services associated

with them. If a station has a secondary service associated with it then

the secondary service will then appear immediately after the primary

service as you press the Tuning Up button.

2. To tune to the secondary service, press and release the Select button.

Most secondary services do not broadcast continually and if the selected

service is not available, the radio will re-tune to the associated primary

service.

Display options - DAB

Your radio has a range of display options when in DAB mode:-

1. Press and release the Info button to cycle through the various options.

a. Scrolling text Displays scrolling text messages such

as artist/track name, phone in number,

etc.

b. Programme type Displays the type of station being

listened to e.g. Pop, Classic, News, etc.

a

1

2

1

b

11

c. Multiplex Name Displays the name of the DAB multiplex

to which the current station belongs.

d. Date Displays the current date.

e. Frequency & channel Displays frequency and channel number

for the currently tuned DAB station.

f. Bit rate & audio type Displays the digital bit rate and audio type

for the currently tuned DAB station.

g. Signal strength Displays a graph showing the signal

strength for the currently tuned DAB

station. The clear unﬁ lled rectangle

indicates minimum signal level

required for satisfactory reception.

c

d

e

f

g

12

Finding new stations - DAB

As time passes new stations may become available. To ﬁ nd new stations

proceed as follows.

1. Press and release the Menu button.

2. Press the Tuning Up or Down buttons until the display shows 'Scan'.

3. Press and release the Select button. Your radio will perform a scan

of the Band III DAB channels. As new stations are found, the station

counter on the right-hand side of the display will increase and stations

will be added to the list.

1

22

3

Signal strength display - DAB

1. Press and release the Info button until the lower line of the display

shows signal strength.

2. Position your clock radio and try adjusting the aerial as to give maximum

number of black rectangles on the signal strength display. Normally,

the best reception will be found with the aerial fully extended.

3. The clear unﬁ lled rectangle indicates minimum signal level required

for satisfactory reception.

1

13

Manual tuning - DAB

Manual tuning allows you to tune your clock radio to a particular DAB

frequency in Band III. Any new stations found will be added to the station

list. This function can also be used to assist the positioning of the aerial or

the clock radio to optimise reception for a speciﬁ c channel or frequency.

Note that UK DAB stations are located in the range of channels 11B to 12D.

1. Press and release the Menu button.

2. Press the Tuning Up or Down buttons until the display shows 'Manual

tune'. Press and release the Select button to enter the manual tuning

mode.

3. Press the Tuning Up or Down buttons to select the desired DAB

channel.

4. Press and release the Select button. The open block in the signal

strength graph shows you the minimum signal strength needed for

good DAB reception. The signal blocks will go up and down showing

the changing signal strength as you adjust the wire aerial or the clock

radio position. Any new radio stations found on the tuned DAB multiplex

will be added to the list stored in the radio.

5. Press and release the Select button to return to the normal tuning

mode.

1

2,3 2,3

2-5

14

Dynamic Range Control (DRC) - DAB

Dynamic range control (also known as DRC) can make quieter sounds

easier to hear when your clock radio is used in a noisy environment.

There are three levels of compression:

DRC 0 No compression applied. (default)

DRC 1 Maximum compression applied.

DRC 1/2 Medium compression applied.

1. Press the On / Off control to switch on your clock radio.

2. Press and release the Mode button until the DAB mode is selected.

3. Press and release the Menu button.

4. Press the Tuning Up or Down buttons until 'DRC Value' appears on

the display. Press and release the Select button. The current DRC

value will be marked with an asterisk.

5. Press the Tuning Up or Down buttons to select the required DRC setting

(default is 0) .

6. Press and release the Select button to conﬁ rm the setting. The display

will return to the previous display.

Note: Not all DAB broadcasts are able to use the DRC function. If the

broadcast does not support DRC, then the DRC setting in the clock radio

will have no effect.

3

4,5 4,5

4,6

2

*

15

Station order setup - DAB

Your clock radio has 3 station order settings from which you can choose.

The station order settings are, alphanumeric, ensemble and valid.

Note: The default station order on your clock radio is alphanumeric.

1. Press the On / Off control to switch on your clock radio.

2. Press and release the Mode button until the DAB mode is selected.

3. Press and release the Menu button.

4. Press the Tuning Up or Down buttons until 'Station order' shows on

the display. Press and release the Select button to enter the station

order adjustment mode. The current station order will be marked with

an asterisk.

5. Press the Tuning Up or Down buttons to choose between

'Alphanumeric', 'Ensemble' and 'Valid'.

'Alphanumeric' - sorts the station list alpha-numerically 0...9 A...Z.

'Ensemble' - organises the station list by DAB multiplex.

'Valid' - shows only those stations for which a signal can be found.

6. Press and release the Select button to select the required station

order.

3

4,5 4,5

4,6

2

*

16

Prune stations - DAB

Over time, some DAB services may stop broadcasting, or may change

location and then not be able to receive a station. In order to remove such

stations from the DAB station list, the Prune stations function will delete

the DAB stations from your station list that can no longer be received.

Stations which cannot be found or which have not been received for a very

long time are shown in the station list with a question mark.

1. Press the On / Off button to switch on your clock radio.

2. Press and release the Mode button until the DAB mode is selected.

3. Press and release the Menu button.

4. Press the Tuning Up or Down buttons until 'Prune' appears on the

display. Press and release the Select button.

5. Press the Tuning Up or Down buttons to select 'Yes'. Press and release

the Select button to cause the stations list to be pruned, eliminating

unavailable stations.

6. If you do not wish to prune stations select 'No' in step 5 and then

press and release the Select button. The display will revert back to

the previous display.

Note: If you have moved to a different part of the country you should

also carry out a search for new stations (please see the section 'Finding

new stations' on page 12).

3

4,5 4,5

4-6

2

?

<

17

Operating your clock radio - FM auto-tune

1. Fully extend the wire aerial located on the rear of your clock radio.

Place the wire antenna so that it is as straight as possible extending

either above or below the radio.

2. Press the On / Off control to switch on your clock radio.

3. Press and release the Mode button until the FM mode is selected.

4. Press and hold down the Tuning Up button for 2 - 3 seconds to cause

your radio to search from low frequency to high frequency and to stop

automatically when it ﬁ nds a station of sufﬁ cient strength.

5. After a few seconds the display will update. The display will show the

frequency of the signal found. If the signal is strong enough and there

is RDS data present then the radio may display the station name.

6. To ﬁ nd other stations press and hold the Tuning Up button as before.

7. Press and hold down the Tuning Down button for 2 - 3 seconds to

cause your radio to search from high frequency to low frequency and

to stop automatically when it ﬁ nds a station of sufﬁ cient strength.

8. When the end of the waveband is reached your radio will recommence

tuning from the opposite end of the waveband.

9. Adjust the Volume to the required setting.

10. To switch off your clock radio, press the On / Off control.

Note:

If you ﬁ nd that FM reception is poor, try repositioning the wire aerial. Fully

extend the wire aerial located on the rear of your clock radio. Place the

wire antenna so that it is as straight as possible extending either above or

below the radio. If you ﬁ nd that an FM broadcast has a lot of background

hiss, this may often be reduced by setting the radio into Mono reception

mode for the current FM station. Please refer to the section "Stereo / Mono

setting - FM" on page 22 for further details.

2,10

3

7 4,6

9

18

Manual tuning - FM

1. Fully extend the wire aerial located on the rear of your clock radio.

Place the wire antenna so that it is as straight as possible extending

either above or below the radio.

2. Press the On / Off control to switch on your clock radio.

3. Press and release the Mode button until the FM mode is selected.

4. Repeatedly press and release the Tuning Up or Down buttons to

tune to a station. The frequency will change in steps of 50kHz.

If the radio is tuned to a station of sufﬁ cient signal strength with RDS

information present, then the display may change to show the station

name.

5. When the waveband end is reached the radio will recommence tuning

from the opposite waveband end.

6. Adjust the Volume to the required setting.

7. To switch off your clock radio, press the On / Off control.

Note:

If you ﬁ nd that FM reception is poor, try repositioning the wire aerial. Fully

extend the wire aerial located on the rear of your clock radio. Place the

wire antenna so that it is as straight as possible extending either above or

below the radio. If you ﬁ nd that an FM broadcast has a lot of background

hiss, this may often be reduced by setting the radio into Mono reception

mode for the current FM station. Please refer to the section "Stereo / Mono

setting - FM" on page 22 for further details.

2,7

3

44

6

19

Display options - FM

Your clock radio has a range of display options for FM mode:-

The Radio Data System (RDS) is a system in which inaudible digital

information is transmitted in addition to the normal FM radio programme.

RDS offers several useful features. The following are available on your

clock radio.

1. Press and release the Info button to cycle through the various options.

a. Scrolling text Displays scrolling text messages such

as artist/track name, phone in number,

etc.

b. Programme type Displays type of station being listened to

e.g. Pop, Classic, News, etc.

c. Frequency Displays the frequency of the station being

listened to.

d. Audio mode Display shows Stereo or Mono.

1

a

b

c

d

Page is loading ...

Roberts Dreamdock 2 User guide

This manual is also suitable for

Roberts Dreamdock 2 User guide

Related papers

Other documents