2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Metra
  7. 99-8229S
99-8229S

Metra 99-8229S Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Metra 99-8229S Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
APPLICATIONS
KIT FEATURES
KIT COMPONENTS
TOOLS REQUIRED
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932 metraonline.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
INSTALLATION INSTRUCTIONS FOR PART 99-8229S
2011 TOYOTA SIENNA
99-8229S
• ISO DIN Head unit provision with pocket
• DDIN Head unit provision
• Painted silver to match factory dash
• A) Radio Housing • B) Radio Housing Brackets • C) Pocket • D) (8) #8 3/8” Phillips Screws
WIRING & ANTENNA CONNECTIONS (Sold Separately)
• TYTO-01 - Toyota Interface 2006-up
• 70-1761 - Toyota Harness
• Panel Removal Tool • Phillips Screwdriver • Flat Blade Screwdriver
• Socket Wrench
A
B
C D
TABLE OF CONTENTS
DASH DISASSEMBLY
• 2011 TOYOTA SIENNA . . . . . . . . . . . . . . . . . . . . 1-2
KIT ASSEMBLY
2011 TOYOTA SIENNA
• ISO DIN HEAD UNIT PROVISION . . . . . . . . . . . . . 3-4
• DDIN HEAD UNIT PROVISION . . . . . . . . . . . . . . . . . . 5
*NOTE: Refer also to the instructions included with the aftermarket radio.
CAUTION : Metra recommends disconnecting the negative battery
terminal before beginning any installation. All accessories, switch-
es and especially air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP certified
technicians
2011 TOYOTA SIENNA
99-8229S DASH DISASSEMBLY
Unclip and remove the trim panel
above the glove box and below the
a/c control. (Fig. A)
Unclip and remove the shifter trim
panel. (Fig. B)
Unclip and remove the a/c control.
(Fig. C)
Continued on PG. 2 ......................
1
2
3
A
B
C
1
2
D
E
Remove (4) 10 MM bolts securing
the radio. (Fig. D)
Remove the (4) Phillips screws
securing the outer a/c vent trim
panel to the factory radio and
separate. (Fig. E)
5
4
2011 TOYOTA SIENNA
99-8229S DASH DISASSEMBLY
Continue to Kit Assembly .............
3
99-8229S KIT ASSEMBLY
ISO DIN HEAD UNIT PROVISION
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
Secure the radio housing brackets
to the radio housing with four #8 3/8”
Phillips screws provided. (Fig. A)
Attach the pocket to the bracket/
radio housing assembly with the four
#8 3/8” Phillips screws provided.
(Fig. B)
Align the holes in the radio housing
brackets with the holes in the ISO
DIN Head Unit and secure the
brackets to the head unit with the
screws included with the unit.
(Fig. C)
1
2
3
A
B
C
4
Continued on PG. 4 ......................
4
99-8229S KIT ASSEMBLY
ISO DIN HEAD UNIT PROVISION
D
5
6
Attach the outer a/c vent trim panel
to the radio housing using the
factory hardware. (Fig. D)
Reassemble dash in reverse order
of disassembly.
5
DDIN HEAD UNIT PROVISION
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
Secure the radio housing brackets
to the radio housing with four #8 3/8”
Phillips screws provided. (Fig. A)
Slide the Double DIN head unit into
the bracket/radio housing assembly
and secure the Double DIN head unit
to the assembly using the screws
supplied with the radio. (Fig. B)
Attach the outer a/c vent trim panel
to the radio housing using the factory
hardware. (Fig. C)
Reassemble dash in reverse order of
disassembly.
1
2
3
A
B
C
4
5
99-8229S KIT ASSEMBLY
Page is loading ...
Page is loading ...
ÍNDICE
DESMONTAJE DEL TABLERO
•2 011 TOYOTASIENNA........................1-2
MONTAJE DEL KIT
2011 TOYOTA SIENNA
•ACCESORIOPARAUNIDADESCENTRALESDINISO...3-4
•ACCESORIOPARAUNIDADESCENTRALESDDIN......5
*NOTA: Asimismo, remítase a las instrucciones incluidas con el ra-
diodeposventa.
PRECAUCIÓN: Metra recomienda desconectar el terminal negativo
delabateríaantesdecomenzarcualquierinstalación.Todoslosac-
cesorios, interruptores y, especialmente, las luces indicadoras de
airbag deben estar enchufados antes de volver a conectar la bat-
eríaocomenzarelciclodeignición.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recomienda técnicos con
certificación del Programa de Certi-
ficación en Electrónica Móvil (Mobile
Electronics Certification Program,
MECP).
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/