Metra Dash kit Installation guide

Metra
Brand
Metra
Model
Dash kit
Category
Car kits
Type
Installation guide

Metra Dash kit is an essential tool for installing an aftermarket radio into a 2011 Honda CR-Z. Here's some important information to get you started:

  • Compatibility: Designed specifically for the 2011 Honda CR-Z, ensuring a seamless fit and integration.
  • Comprehensive kit: Includes all necessary components, such as a radio housing, ISO brackets, pocket, screws, and clips, for a complete installation.
  • Easy assembly: Step-by-step instructions guide you through the installation process, making it simple and straightforward.
  • Enhanced functionality: Provides a recessed DIN mount provision and ISO radio mount provision, expanding your options for aftermarket radio installations.

Metra Dash kit is an essential tool for installing an aftermarket radio into a 2011 Honda CR-Z. Here's some important information to get you started:

  • Compatibility: Designed specifically for the 2011 Honda CR-Z, ensuring a seamless fit and integration.
  • Comprehensive kit: Includes all necessary components, such as a radio housing, ISO brackets, pocket, screws, and clips, for a complete installation.
  • Easy assembly: Step-by-step instructions guide you through the installation process, making it simple and straightforward.
  • Enhanced functionality: Provides a recessed DIN mount provision and ISO radio mount provision, expanding your options for aftermarket radio installations.
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
APPLICATIONS
1-800-221-0932
metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-7879
2011 Honda CR-Z
99-7879
•RecessedDINmountradioprovisionwithpocket
•ISOradiomountprovisionwithpocket
WIRING & ANTENNA CONNECTIONS(SoldSeparately)
Wireharness:70-1729
Antennaadapter:40-HD10
PanelRemovalTool(ATHKNGL)•PhillipsScrewdriver
CA
GF
B
D E
•A)RadioHousing•B)ISOBrackets•C)Pocket
•D)(11)#8X3/8”PhillipsTrussHeadscrews
•E)(2)#6X3/8”PhillipsPanHeadscrews
•F)(4)Whiteplasticclips•G)(1)Metalclip
TOOLS REQUIRED
KIT FEATURES
KIT COMPONENTS
Table of Contents
Dash Disassembly
–HondaCR-Z2011 3
Kit Assembly
–ISOmountradioprovisionwithpocket 4-5
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
99-7879
Caution
Metra recommends disconnecting the negative battery terminal before beginning any
installation. All accessories, switches, and especially air bag indicator lights must be
plugged in before reconnecting the battery or cycling the ignition.
*NOTE: Refer Also to the instructions included with the aftermarket radio.
1. Unclipandremovethelowerdashpanel
coverabovethepocketandremovethe
8mm/Phillipsscrew.(FiguresAandB)
2. Unclipandremovetheradiofromthe
dash.(Tip:startatthetopoftheradio)
(FigureC)
3. Unplugandremovetheradio.
Continued to kit assembly
3
Dash Disassembly
99-7879
(Figure A)
(Figure B)
(Figure C)
4
Kit Assembly
99-7879
(Figure A)
Hazard switch
Red factory clip
White
plastic
clips
White
plastic
clips
Metal clip
Air bag light
1. Removethecentertopclipoffofthe
factoryradioandinstallontothe
99-7879installkit.
2. Followthediagramtoattachthe
necessaryclipstotheradiohousingin
theproperlocations.
3. Remove2phillipsscrewsholdingthe
factoryhazardswitchforthefactory
panelandinstallintothe99-7879
re-usingthefactoryhardware.
4. Remove2phillipsscrewsholdingthe
passengerairbaglightfromthefactory
panelandinstallintothe99-7879
usingthesupplied#6screws.
5
ISO mount radio provision with pocket
99-7879
(Figure B)
(Figure C)
1. Locatethefactorywiringharnessinthe
dash.Metrarecommendsusingthe
propermatingadapterfromMetraor
AXXESS.Re-connectthenegative
batteryterminalandtesttheunitfor
properoperation.
2. Aligntheholesintheradiohousing
bracketswiththeholesintheISODIN
HeadUnitandsecurethebracketsto
theheadunitwiththescrewsincluded
withtheunit.(FigureB)
3. Attachthepockettothebracket/
radiohousingassemblywiththefour
#8X3/8”Phillipsscrewsprovided.
(FigureB)
4. Securetheradiohousingbracketsto
theradiohousingwithfour#8X3/8”
Phillipsscrewsprovided.(FigureC)
5. Reassembledashinreverseorderof
disassemblyusingthesupplied
#8screwinplaceofthefactoryscrew
removedinstepone,figureBofthe
dashdisassembly.
Notes
Notes
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-7879
REV. 5/05/11
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Metra Dash kit Installation guide

Metra
Brand
Metra
Model
Dash kit
Category
Car kits
Type
Installation guide

Metra Dash kit is an essential tool for installing an aftermarket radio into a 2011 Honda CR-Z. Here's some important information to get you started:

  • Compatibility: Designed specifically for the 2011 Honda CR-Z, ensuring a seamless fit and integration.
  • Comprehensive kit: Includes all necessary components, such as a radio housing, ISO brackets, pocket, screws, and clips, for a complete installation.
  • Easy assembly: Step-by-step instructions guide you through the installation process, making it simple and straightforward.
  • Enhanced functionality: Provides a recessed DIN mount provision and ISO radio mount provision, expanding your options for aftermarket radio installations.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents