Posiflex SD-676W User manual

Brand: Posiflex

Model: SD-676W

Type: User manual

This manual is also suitable for

SD-676

Package Contents

 SD-676 Side Attachment

 User Manual

 2 iButton Keys

(if the iButton reader is built in)

Features

 2-in-1 (MSR + iButton Reader) side attachment for Posiflex 15”/17” KS

series terminals

 Bi-directional swipe

 3-track support

 Supporting ISO 7811 magnetic card

 Interface: USB

Views of the Side Attachment

Front View Rear View

SD-676

Side Attachment

User Manual

19850905010 Ver. A0

http://www.posiflex.com

3-track Magnetic Stripe Reader

iButton Reader

Mounting Screw Holes

Hardware Installation

During Installation of the SD-676, do NOT power ON your terminal and

monitor.

Installation of SD-676 onto the 15”/17” KS Series Terminals

Start to install SD-676 onto the terminal according to the following steps.

1. Loosen and remove the two fixing screws

from the side mount cover on the back of

the right side of the terminal.

2. Remove the side mount cover from the back

of the right side of the terminal.

3. Insert the USB I/O cable connected from

the main board of the terminal into the cable

connector of the side attachment.

4. Determine that the USB I/O cable is

securely connected to the cable connector of

the side attachment.

Cover

5. Manage the USB I/O cable well, as shown

in the right figure.

6. Align the two mounting screw holes of the

SD-676 side attachment with the two screw

holes on the terminal.

7. Fix the SD-676 side attachment onto the

terminal by locking the two screws shipped

with the package.

8. The installation of SD-676 side attachment

onto the terminal is completed, as shown in

the right figure.

Driver Installation and Utility Outline

Before installing the drivers of the SD-676 side attachment, after installing the

SD-676 side attachment hardware, power on your KS-series terminal.

Installing the Posiflex USB MSR Manager

After you finish installing the side attachment onto the KS-series terminal,

to allow you to easily do settings of the attachment, please install the

Posiflex USB MSR Manager. To download the Posiflex USB MSR

Manager, go to the Posiflex’ global website: http://www.posiflex.com/en-

global/Download/download to download the up-to-date utility.

After downloading tool, follow the step-by-step instructive messages to

complete the manager installation. After completion of the manager

installation, restart your terminal.

Next, left click Start  Programs  Posiflex Tools  Posiflex USB

MSR Manager to open the MSR manager.

※ If you purchase the MSR model of which the interface is KB wedge,

ignore the following steps.

Then, the Posiflex USB MSR Manager appears . If you purchase the MSR

model of which the interface is virtual COM, tick off on virtual COM port

interface and tap Save & Exit to exit from the manager.

If you select virtual COM port interface, go to the Posiflex’ global website

to download the virtual COM driver and install it. follow the step-by-step

instructive messages to complete the driver installation. After completion of

the driver installation, restart your terminal.

Installing the iButton Setup Tool

If you purchase the iButton model of which the interface is Virtual COM,

install the I-Button Virtual COM Driver before installing the iButton

Setup Tool.

To download the I-Button Virtual COM Driver and the iButton Setup Tool,

go to the Posiflex’ global website: http://www.posiflex.com/en-

global/Download/download to download the up-to-date driver and utility.

※ If you purchase the iButton model of which the interface is KB wedge,

ignore the driver installation and just install the iButton Setup Tool.

After downloading driver and tool, follow the step-by-step instructive

messages to complete the installation. After completion of the installation,

restart your terminal.

To avoid users doing settings by mistake, it is suggested that professional

technicians implement the setup. To do more advanced settings on the side

attachment, contact directly the Posiflex’ technical service team.

Operating the SD-676

After installing the drivers and tools and setting up SD-676, you can start to

operate the side attachment.

Magnetic Stripe Reader (MSR)

1. Keep the magnetic stripe of the card facing the arrow

head circled in the picture.

2. Move the magnetic stripe card along the track of the

reader from top to bottom or from bottom to top in the

direction of the arrow.

iButton Reader (Optional)

1. Aim a magnetic iButton key at the reading

area of magnetic iButton reader and keep

the key close to the reader until the

magnetic iButton key is absorbed by the

magnetic iButton reader.

2. When the magnetic iButton key is

completely absorbed by the magnetic

iButton reader, the iButton reader can read

the ID data written in the iButton key and

sends the ID data to its connected KS-series

POS terminal.

※ The product information and specifications are subject to change without

prior notice. To get the detailed information on SD-676, please check this

model from Posiflex Global Website

(http://www.posiflex.com/en-global/Download/download).

iButton Reader

iButton Key

<MEMO>

Posiflex SD-676W User manual

Brand: Posiflex

Model: SD-676W

Type: User manual

This manual is also suitable for

SD-676

Download PDF

report

Posiflex SD-676W User manual

This manual is also suitable for

Posiflex SD-676W User manual

Related papers

Other documents