wattstopper LMSH-SBTEST Installation guide

wattstopper
Brand
wattstopper
Model
LMSH-SBTEST
Type
Installation guide

This manual is also suitable for

wattstopper LMSH-SBTEST is a device used for testing wiring connections of DLM Shade bus. It can be used to test both pre-configured and installer built shade bus cables. The device has two Shade Bus ports and is powered by the DLM Shade Bus. It has three LEDs (Blue, Green, and Red) that indicate the status of the connection. A steady Blue and Green LED indicate no error, while any other combination indicates an error. The wattstopper LMSH-SBTEST is a valuable tool for ensuring that your DLM Shade bus wiring is correct.

Here are some of the features and possible use cases of the wattstopper LMSH-SBTEST:

wattstopper LMSH-SBTEST is a device used for testing wiring connections of DLM Shade bus. It can be used to test both pre-configured and installer built shade bus cables. The device has two Shade Bus ports and is powered by the DLM Shade Bus. It has three LEDs (Blue, Green, and Red) that indicate the status of the connection. A steady Blue and Green LED indicate no error, while any other combination indicates an error. The wattstopper LMSH-SBTEST is a valuable tool for ensuring that your DLM Shade bus wiring is correct.

Here are some of the features and possible use cases of the wattstopper LMSH-SBTEST:

Wattstopper
®
DLM Shade Bus Test Tool
Installation Instructions
No: 29992 – 004/21 rev. 3
Catalog Numbers • Les Numéros de Catalogue • Los Números de Catálogo: LMSH-SBTEST
Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China
SPECIFICATIONS
Power Supply ......................................................DLM Shade Bus
Shade Bus Voltage.......................................................... Max 36V
Current Consumption .............................................25 mA Max
Shade Bus Ports ..........................................................................2
Environment:
Operating Temperature ............32° to 131°F (0° to 55°C)
Storage Temperature ..............23° to 176°F (-5° to 80°C)
Relative Humidity ..................5 to 95% (non condensing)
TEST PROCEDURE
The LMSH-SBTEST is used for testing wiring connections of DLM Shade bus.
• If using Legrand pre-configured shade bus cables – Connect to the shade bus at the end-of-line to test entire bus. If an error
exists, connect to devices moving inwards towards the power supply to determine where the wiring problem exists. Correct the
wiring issue when found, and repeat the end-of-line test.
• If using installer built shade bus cables – Connect LMSH-SBTEST to each cable after it is connected to confirm there is no error
with wiring before connecting another cable.
Error Detection on LMSH-SBTEST
Blue and Green LEDs are lit No error found
Any other combination Error exists
Line
Voltage
Line/Hot
Black wire
Neutral
White wire
Ground
Green wire
LMSH-SW10x
Shade
Switch
LMSH-SW105
Shade
Switch
LMSH-SBE4
Shade Bus Extender
DLM
Local Network
Low Voltage
LMRJ Cables
Shade Bus Cables
LMSH-PS610
13” Pre-terminated
Motor Whip
LMSH-SBTEST
If using an LMSH-PS610 with Shade Bus Cable connected
to both jacks, test the end-of-line for both connections
Red LED Blue LED Green LED
No. 29992 – 03/21 rev. 3
© Copyright 2021 Legrand All Rights Reserved.
© Copyright 2021 Tous droits réservés Legrand.
© Copyright 2021 Legrand Todos los derechos reservados.
Limited Lifetime Warranty
Legrand offers a Limited Lifetime Warranty
for window shade product, and/or specific
components of the window shade product to be
free from defects in materials and workmanship
under normal use. There are no obligations or
liabilities on the part of Legrand for consequential
damages arising out of, or in connection with,
the use or performance of this product or other
indirect damages with respect to loss of property,
revenue or profit, or cost of removal, installation
or reinstallation. For full warranty details visit
www.legrand.us/commercial-shading
Garantie à vie limitée
Legrand offre une garantie à vie limitée pour
le produit de store et / ou des composants
spécifiques du produit de store pour être exempts
de défauts de matériaux et de fabrication dans
des conditions normales d’utilisation. Il n’y a
aucune obligation ou responsabilité de la part
de Legrand pour les dommages consécutifs
résultant de, ou en relation avec l’utilisation
ou la performance de ce produit ou d’autres
dommages indirects en ce qui concerne la perte
de biens, de revenus ou de bénéfices, ou le coût
de l’enlèvement, installation ou réinstallation.
Pour plus de détails sur la garantie, visitez
www.legrand.us/commercial-shading
Garantia limitada de por vida
Legrand ofrece una garantía limitada de por
vida para el producto de sombra de ventana,
y / o componentes específicos del producto de
sombra de ventana para estar libres de defectos
en materiales y mano de obra bajo uso normal.
No hay obligaciones ni responsabilidades por
parte de Legrand por daños consecuentes
que surjan de, o en conexión con, el uso o
desempeño de este producto u otros daños
indirectos con respecto a la pérdida de
propiedad, ingresos o ganancias, o costo de
remoción, instalación o reinstalación Para
obtener detalles completos de la garantía, visite
www.legrand.us/commercial-shading
WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA
833.456.4291
www.legrand.us/commercial-shading
  • Page 1 1
  • Page 2 2

wattstopper LMSH-SBTEST Installation guide

wattstopper
Brand
wattstopper
Model
LMSH-SBTEST
Type
Installation guide
This manual is also suitable for

wattstopper LMSH-SBTEST is a device used for testing wiring connections of DLM Shade bus. It can be used to test both pre-configured and installer built shade bus cables. The device has two Shade Bus ports and is powered by the DLM Shade Bus. It has three LEDs (Blue, Green, and Red) that indicate the status of the connection. A steady Blue and Green LED indicate no error, while any other combination indicates an error. The wattstopper LMSH-SBTEST is a valuable tool for ensuring that your DLM Shade bus wiring is correct.

Here are some of the features and possible use cases of the wattstopper LMSH-SBTEST:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents