kitsound.co.uk
JB. 3079 / Made in China. © KitSound
™
2015
Christchurch, Dorset, BH23 4FL, UK
USER MANUAL
CUBE
WIRED PORTABLE
SPEAKER
We are craftspeople. We are
musicians. We are KitSound
™
And we all commit ourselves to
achieving one shared goal: Bringing
people closer to their music. By truly
understanding music we stay true to
its craft. Pure, rich, incredible sound.
We’ll settle for nothing less.
At KS we believe your music deserves
to be showcased on great quality products
that don’t cost the earth. We might
not all share the same taste in music
(the ferocious disputes on music forums
prove that), but whether it’s Irish folk,
death metal or any number of obscure
genres which seem to be multiplying
by the minute, the artists responsible
for connecting with you through their
craft have bared their souls to do so.
And we think that’s worth celebrating.
Like the musicians we’re honouring,
we’re obsessed with our craft; ne-tuning
and tweaking our products to make
sure we constantly deliver full-bodied,
symphonic sound. So from a single
note played on a piano, to the full
impact of a bass guitar, you can rest
assured that you’ll always be doing
justice to your music.
8
9
Please read this manual carefully before use.
Box contents
• KS Cube wired portable speaker
• USB charge cable
• 3. 5 mm audio cable
• User manual
Instructions for use
Charging the battery
The Cube has a built-in rechargeable lithium
battery. Make sure the Cube is switched off.
Connect one end of the USB power cable to
the charging port on the Cube and connect the
other end to your PC or USB mains adaptor.
The battery will start charging.
• It takes up to 4 hours to fully charge the battery
• Whilst charging, the LED will be solid red
• When fully charged, the LED will turn off
10
11
Line-out
If you have more than one Cube speaker (or any
other speaker with a line-in), you can pair them
together for bigger sound.
To do this:
• Connect your device to the Cube (follow the
‘Using the speaker’ instructions)
• Connect a 3.5 mm cable from the line-out
port on the Cube speaker to the line-in port
on another speaker
If the second speaker also has a line-out port, you
can then connect a third speaker. You can continue
chaining speakers together for as long as you like.
Using the speaker
• Plug one end of the 3.5 mm cable into
the Cube’s line-in port
• Plug the other end of the 3.5 mm cable
into your device
• Switch the Cube on and the LED will be
solid blue
• On your connected device, play your
music/videos and the audio will play
through the Cube
• Volume is controlled only on the device
playing the audio
12
13
Care for your Cube
Please DON’T
• Get the Cube wet
• Drop the Cube as this will invalidate
your warranty
• Open up the Cube. There are no user
serviceable parts inside
• Expose the Cube to extreme temperatures
or rapid changes of hot to cold or vice versa
Please DO
• Clean the Cube with a soft dry cloth and
no detergents
Other information
Your device will have an internal amplier and
if it is playing digital les like MP3s, it will also
have an integrated DAC (Digital Audio Converter).
If you turn the volume up to 100%, your device
will be sending a distorted signal. To avoid this
and to get the best quality from the speaker, we
recommend you do not run your device any
higher than 95% volume. Some devices output
higher than others so you may need to reduce
the volume if you experience distortion.
14
15
Specications
Play time up to 6 hours
Output RMS
3 W
@ 4 ohm
S/N 80 dB
Frequency response 90 Hz – 18 kHz
Driver 45 mm
Battery Li-ion, 500 mAh
Aux-in 3.5 mm
Troubleshooting
We hope you’ve now got all the information you
need to get started, but if you’re having problems
with anything, please feel free to contact us at:
support
@
kitsound.co.uk
Please do not attempt to open this product. There
are no user serviceable parts inside, in particular
if your product has an embedded, non-replaceable
battery, do not attempt to access or remove the
battery as this may cause personal injury and will
damage the product.
Making any attempt to open the product or carry out
repair voids any and all warranties.
We apologise for any inconvenience caused by minor
inconsistencies in these instructions, which may
occur as a result of product improvement and
development.
/