www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: 408.573.8580 | Fax: 408.573.8588
2.5" to 3.5" IDE HDD Converter kit
INTRODUCTION
This installation kit enables any 2.5" hard drive or SDD (Solid State Drive) to
be used like a standard 3.5" hard drive in a desktop system. Comes in choice
of brackets for standard 1" height or the slim floppy height, the sturdy
mounting metal bracket allows any hard drive or SSD to fit perfectly into any
standard or slim floppy 3.5" drive bay.
For 2.5" IDE drives or SSD, the IDE connector kit mounts easily onto the back
of the drive, enabling it to connect to PC power supply and the standard IDE
cable commonly found on desktop, server and most industrial PCs.
Model: AK25IDE35B, AK25IDE35W, AAMKHD25B, AAMKHD25W,
AAMKSFHD25B, AA25IDE35
Comparison of standard height and slim floppy bracket