Hardware Installation:
Step 1: Insert mSATA SSD into the slot diagonally.
Step 2: Push the mSATA SDD down so the holes on the mSATA SDD are aligned
with the screw holes on the mSATA - SATA HDD Adapter.
Step 3: Using the two included screws, secure the mSATA SDD onto the adapter.
Step 4: Connect adapter onto a computer with 15-pn SATA power connector and
7-pin SATA data connector to access data on the mSATA SSD, or replace 2.5” SATA
hard drive inside a notebook.
Note: Optional mounting brackets can be purchased to mount the adapter
into any 3.5” drive enclosure, 3.5” drive bay, 2.5” drive enclosure, or slim CD
bay.
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v7.1.11
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
CONTACT US
T E C H N O L O G I E S
User Guide
mSATA - SATA
HDD Adapter
(ADMSAHDD)
mSATA SDD
slot
SATA Data and
Power Connector
/
